Samsung SCX-6122FN
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A4
Цветность печати
черно-белая
Общие характеристики |
|
---|---|
Размещение |
настольный |
Макс. формат |
A4 |
Цветность печати |
|
Тип |
лазерный/светодиодный |
Технология печати |
лазерная |
Телефон |
|
Печать фотографий |
|
Область применения |
малый офис |
Копир |
|
Тип устройства |
МФУ |
Факс |
|
Сканер |
|
Принтер |
|
Двусторонняя печать |
|
Время разогрева |
25 |
Пигментные чернила |
|
Прямая печать |
|
Печать без полей |
|
Макс, разрешение для ч/б печати |
|
По Y | 1 200 |
По X | 1 200 |
Скорость цветной печати |
|
A4 | 22 |
Время выхода первого отпечатка |
|
Ч/б | 12 |
Копир |
|
Время выхода первой копии |
12 |
Шаг масштабирования |
0,01 |
Макс, количество копий за цикл |
999 |
Значение масштаба |
|
Максимальное | 4 |
Минимальное | 0,25 |
Макс, разрешение (ч/б) |
|
По X | 600 |
По Y | 600 |
Сканер |
|
Стандарт WIA |
|
Стандарт TWAIN |
|
Отправка изображения по e-mail |
|
Глубина цвета |
36 бит |
Емкость устройства автоподачи оригиналов |
40 |
Тип датчика сканера |
ПЗС (CCD) |
Устройство автоподачи оригиналов |
одностороннее |
Макс. формат оригинала |
A4 |
Оттенки серого |
256 |
Тип сканера |
планшетный/протяжный |
Макс, размер сканирования |
|
По Y | 356 |
По X | 208 |
Разрешение сканера |
|
По Х | 600 |
По Х (улучшенное) | 4 800 |
По Y (улучшенное) | 4 800 |
Расходные материалы |
|
Ресурс фотобарабана |
20 000 |
Количество картриджей |
1 |
Ресурс ч/б картриджа/тонера |
8 000 |
Печать на: |
|
CD/DVD | |
Рулоне | |
Фотобумаге | |
Карточках | |
Матовой бумаге | |
Конвертах | |
Глянцевой бумаге | |
Этикетках | |
Пленках | |
Плотность бумаги |
|
Максимальная | 200 |
Минимальная | 60 |
Факс |
|
Макс, скорость передачи данных |
33,6 Кбит/с |
PC Fax |
|
Цветной |
|
Память |
640 |
Макс, разрешение |
|
По X | 406 |
По Y | 392 |
Телефон |
|
Спикерфон |
|
Автоответчик |
|
Caller ID |
|
АОН |
|
Проводная трубка |
|
Беспроводная трубка |
|
Стандарт DECT |
|
Языки управления |
|
PCL 5c | |
PCL 5e | |
PPDS | |
PostScript 2 | |
PostScript 3 | |
PCL 6 | |
PostScript | |
Лотки |
|
Подача бумаги |
|
Стандартная | 650 |
Максимальная | 1 200 |
Вывод бумаги |
|
Стандартный | 250 |
Финишер |
|
Брошюровщик |
|
Сортер |
|
Сортировка со сдвигом |
|
Степлер |
|
Интерфейсы |
|
Версия USB |
2,0 |
LPT |
|
Ethernet (RJ-45) |
|
USB |
|
RS-232 |
|
Bluetooth |
|
FireWire (IEEE 1394) |
|
Wi-Fi |
|
Устройство для чтения карт памяти |
|
Веб-интерфейс |
|
Инфракрасный порт |
|
Память/Процессор |
|
Объем памяти |
24 |
Дополнительная информация |
|
Работа от аккумулятора |
|
Экран |
|
Поддержка ОС |
|
DOS | |
Windows | |
Mac OS | |
Linux | |
Потребляемая мощность |
|
При работе | 450 |
В режиме ожидания | 28 |
Уровень шума |
|
При работе | 65 |
Габариты |
|
Высота |
455 |
Глубина |
430 |
Ширина |
560 |
Вес |
22,55 |
Модули
SCF Unit(Option Cassette)
Exit Assy
MAIN
CASSETTE ASSY
ADF ASSY
Housing Scanner
Base Frame
Main Frame Assy
Drive Assy
DADF Sub Assy
FuserAssy
Pick-up Assy
Platen Cover Assy
MP Assy
DADF Platen Cover Assy
DADF Assy
OPE Cover
FEEDER ASSY
Side Cover Assy
Детали
Деталь: | ELA UNIT-SCF(MC2) |
Парткод: | JC96-03009A |
Деталь: | PMO-COVER TOP SCF |
Парткод: | JC72-00935A |
Деталь: | ELA HOU-FRAME-SCF(MC2) |
Парткод: | JC96-03005A |
Деталь: | CBF HARNESS-GND |
Парткод: | JC39-00228A |
Деталь: | MEA UNIT-CASSETTE |
Парткод: | JC97-01849A |
Деталь: | ELA HOU-UPPER_SCF2 |
Парткод: | JC96-03007A |
Деталь: | ELA HOU-MOTOR_SCF2 |
Парткод: | JC96-03006A |
Деталь: | ELA HOU-SOLENOID_SCF2 |
Парткод: | JC96-03008A |
Деталь: | MEA UNIT-LOWER_SCF2 |
Парткод: | JC97-01883A |
Деталь: | CBF HARNESS-SCF_GND |
Парткод: | JC39-00370A |
Деталь: | PMO-BASE FRAME-SCF |
Парткод: | JC72-00793A |
Деталь: | PBA Sub-SCF |
Парткод: | JC92-01614A |
Деталь: | CBF HARNESS-SCF_8P |
Парткод: | JC39-00102A |
Деталь: | CAM-CATCH |
Парткод: | JC66-00050A |
Деталь: | ICT-SHAFT HV LARGE |
Парткод: | JC70-40912A |
Деталь: | SPRING ETC--HV LARGE |
Парткод: | JC61-00031A |
Деталь: | IPR-PLATE GROUND(A) |
Парткод: | JC70-00249A |
Деталь: | Foot-ML80 |
Парткод: | JC61-40001A |
Деталь: | PMO-GUIDE PAPER UPPER SCF |
Парткод: | JC72-00936A |
Деталь: | SHAFT-PICK_UP CST |
Парткод: | JC66-00672A |
Деталь: | SHAFT-PICK_UP SUB |
Парткод: | JC66-00596A |
Деталь: | PMO-Bearing Shaft |
Парткод: | JC72-41191A |
Деталь: | GEAR-PICK UP |
Парткод: | JC66-00326A |
Деталь: | RUBBER-ROLLER PICKUP |
Парткод: | JC73-00145A |
Деталь: | RUBBER-PICKUP ROLLER_S |
Парткод: | JC73-00163A |
Деталь: | PMO-BUSHING_P/U,MP |
Парткод: | JC72-41364A |
Деталь: | PMO-M-ACTUATOR_NO PAPER |
Парткод: | JC72-01313A |
Деталь: | BRACKET SCF MOTOR |
Парткод: | JC61-00728A |
Деталь: | SCF GEAR 41/23 |
Парткод: | JC66-00578A |
Деталь: | OPC GEAR 53/37 |
Парткод: | JC66-00580A |
Деталь: | SCF GEAR 53/31 |
Парткод: | JC66-00577A |
Деталь: | MOTOR STEP-SCF (2K) |
Парткод: | JC31-00020B |
Деталь: | Ring-E |
Парткод: | 6044-000125 |
Деталь: | CBF HARNESS SCF |
Парткод: | JC39-00345A |
Деталь: | SOLENOID-PICK UP |
Парткод: | JC33-00007A |
Деталь: | BRACKET CLUTCH SCF |
Парткод: | JC61-00727A |
Деталь: | PMO-GUIDE PAPER LOWER |
Парткод: | JC72-00797A |
Деталь: | PMO-HOLDER IDLE ROLL16 |
Парткод: | JC72-00660A |
Деталь: | PMO-ROLLER IDLE (SCF) |
Парткод: | JC72-01244A |
Деталь: | PMO-BUSH IDLE ROLL-SCF16 |
Парткод: | JC72-00658A |
Деталь: | SPRING ETC-PAD |
Парткод: | JC61-70953A |
Деталь: | HOUSING-M-PICKUP LARGE |
Парткод: | JC61-00822A |
Деталь: | HOUSING-M-PICKUP SMALL |
Парткод: | JC61-00823A |
Деталь: | GEAR-FEED (SCF) |
Парткод: | JC66-40955A |
Деталь: | RING-E ID4 |
Парткод: | 6044-000125 |
Деталь: | RING-E ID5 |
Парткод: | 6044-000231 |
Деталь: | FEED ROLLER SCF MC2 |
Парткод: | JC66-00579A |
Деталь: | ICT-PIN ADF |
Парткод: | JB70-00168A |
Деталь: | GROUND PLATE SCF |
Парткод: | JC63-00194A |
Деталь: | CBF HARNESS GND STAR WHELL |
Парткод: | JB39-00173A |
Деталь: | PBA SUB-EXIT SEN |
Парткод: | JC92-01364A |
Деталь: | MEA UNIT-EXIT |
Парткод: | JC97-01643D |
Деталь: | PMO-GUIDE_JAM REMOVE |
Парткод: | JC72-00712B |
Деталь: | PMO-GUIDE-EXIT LOWER |
Парткод: | JC72-00710A |
Деталь: | SPRING ETC-EXIT LOWER IDLE |
Парткод: | JC61-00484A |
Деталь: | HOLDER-EXIT(MC) |
Парткод: | JC61-00547A |
Деталь: | PMO-Roller FD F |
Парткод: | JC72-41007A |
Деталь: | PMO-Roller FD R |
Парткод: | JC72-41008A |
Деталь: | Spring Etc-Exit Roll FD |
Парткод: | JC61-70911A |
Деталь: | SHAFT-IDLE_LOWER |
Парткод: | JC66-00715A |
Деталь: | PMO-ROLLER_EXIT |
Парткод: | JC72-40361A |
Деталь: | PMO-GUIDE_EXIT UPPER |
Парткод: | JC72-00708B |
Деталь: | MEC-ROLLER EXIT DRIVE |
Парткод: | JC75-00166A |
Деталь: | PMO-BEARING LARGE DP |
Парткод: | JC72-00885A |
Деталь: | PMO-ROLLER DECURL |
Парткод: | JC72-00833A |
Деталь: | PMO-BUSHING DP |
Парткод: | JC72-01345A |
Деталь: | PMO-BEARING LARGE DP |
Парткод: | JC72-40978A |
Деталь: | PMO-HOLDER PAD,MP |
Парткод: | JC72-00771A |
Деталь: | GEAR-DUPLEX |
Парткод: | JC66-40912A |
Деталь: | PMO-PULLEY DUPLEX |
Парткод: | JC72-40980A |
Деталь: | Ring-C |
Парткод: | 6044-000159 |
Деталь: | Belt-Timing Gear |
Парткод: | 6602-001084 |
Деталь: | IPR-GROUND-EXIT |
Парткод: | JC70-00252A |
Деталь: | PMO-LEVER_STACKING |
Парткод: | JC72-00709B |
Деталь: | MEC-Brush Antistatic |
Парткод: | JC75-00095A |
Деталь: | Screw-Taptite |
Парткод: | 6003-000196 |
Деталь: | PBA SUB-BIN_FULL_SEN |
Парткод: | JC92-01400B |
Деталь: | BOX-MAIN |
Парткод: | - |
Деталь: | CBF-POWER CORD |
Парткод: | 3903-000067 |
Деталь: | CBF-POWER CORD |
Парткод: | 3903-000082 |
Деталь: | CBF-POWER CORD |
Парткод: | 3903-000085 |
Деталь: | CBFINTERFACE-USB |
Парткод: | JC39-00001A |
Деталь: | CBF LINE CORD-6P 3000MM E3115BLK |
Парткод: | JC39-00007A |
Деталь: | CBF LINE CORD-6P 100MM BLK |
Парткод: | JC39-00008A |
Деталь: | CBF LINE CORD |
Парткод: | JF39-50094B |
Деталь: | PMO-DUMMY BASE FRAME |
Парткод: | JC72-00789B |
Деталь: | ELA HOU-SHIELD MAIN |
Парткод: | JC96-04182A |
Деталь: | PMO-COVER FEED AY |
Парткод: | JC72-00801A |
Деталь: | PMO-GUIDE PAPER OUT |
Парткод: | JC72-00835B |
Деталь: | SHEET-CONNECTOR |
Парткод: | JC63-00072A |
Деталь: | CBF HARNESS-LSU |
Парткод: | JC39-00336A |
Деталь: | Harness-HVPS |
Парткод: | JC39-00590A |
Деталь: | HARNESS-MAIN_MOTOR |
Парткод: | JC39-00598B |
Деталь: | GEAR-PICK_UP |
Парткод: | JC66-00335A |
Деталь: | IPR-SHIELD SMPS UPPER |
Парткод: | JC70-00248A |
Деталь: | MEA UNIT-HOLD GND ASSY |
Парткод: | JC97-01574A |
Деталь: | MEA UNIT-HOLD GEAR ASSY |
Парткод: | JC97-01573A |
Деталь: | PMO-CAM JAM REMOVE |
Парткод: | JC72-00799A |
Деталь: | PMO-LOCKER DEVE |
Парткод: | JC72-00805A |
Деталь: | PMO-LEVER JAM REMOVE |
Парткод: | JC72-00804A |
Деталь: | HARNESS-POWER_SWITCH |
Парткод: | JC39-00601A |
Деталь: | GEAR-TRANSFER |
Парткод: | JC66-40947A |
Деталь: | PMO-Bearing Shaft |
Парткод: | JC72-41191A |
Деталь: | MEC-TRANSFER ROLLER |
Парткод: | JC75-00148A |
Деталь: | PMO-COVER BRKT MOTER |
Парткод: | JC72-00834A |
Деталь: | PMO-GUIDE CST RAIL |
Парткод: | JC72-00791B |
Деталь: | SHEET-FEED |
Парткод: | JC63-00078A |
Деталь: | IPR-GUIDE CASSETTE PAPER |
Парткод: | JC70-00244A |
Деталь: | SHIELD-P_MAIN BOARD |
Парткод: | JC63-01092A |
Деталь: | Harness-Inlet |
Парткод: | JC39-00604A |
Деталь: | CBF Harness-Liu Gnd |
Парткод: | JB39-00103A |
Деталь: | SPRING ETC-PLATE TR |
Парткод: | JC61-70203A |
Деталь: | SPRING ETC-TR_L |
Парткод: | JC61-70961A |
Деталь: | PMO-BUSH |
Парткод: | JC72-40228A |
Деталь: | PMO-HOLDER GND TR |
Парткод: | JC72-00883A |
Деталь: | SPRING ETC-TR_R |
Парткод: | JC61-70906A |
Деталь: | PMO-HOLDER GEAR TR |
Парткод: | JC72-00884A |
Деталь: | MEA UNIT-CASSETTE |
Парткод: | JC97-01736D |
Деталь: | PMO-IMPACT CASSETTE |
Парткод: | JC72-00877C |
Деталь: | PLATE-P_GUIDE PAPER |
Парткод: | JC61-00831A |
Деталь: | IPR-PLATE K/UP |
Парткод: | JC70-00221A |
Деталь: | PMO-COVER CASSETTE |
Парткод: | JC72-00795B |
Деталь: | PMO-FRAME CASSETTE |
Парткод: | JC72-00716B |
Деталь: | GUIDE-FRONT CST PLUS |
Парткод: | JC61-00825C |
Деталь: | PMO-GUIDE REAR |
Парткод: | JC72-00717C |
Деталь: | GUIDE-P-SIDE CST |
Парткод: | JC61-00826A |
Деталь: | PMO-Locker Plate |
Парткод: | JC72-41210A |
Деталь: | PAD-CST PLUS |
Парткод: | JC69-00474A |
Деталь: | Spring Etc-Locker,Plate |
Парткод: | JG61-70531A |
Деталь: | Spring-CS |
Парткод: | 6107-001190 |
Деталь: | Spring-CS |
Парткод: | 6107-001191 |
Деталь: | GUIDE-SIDE HANDLE |
Парткод: | JC61-00824C |
Деталь: | IPR-P-FINGER LEFT |
Парткод: | JC70-00325A |
Деталь: | BUSH-M-FINGER,F |
Парткод: | JC61-00653A |
Деталь: | Washer-Plain |
Парткод: | 6031-001255 |
Деталь: | SPRING ETC-WHITE BAR |
Парткод: | JC61-00548A |
Деталь: | GUIDE-SUB WALL |
Парткод: | JC61-00840B |
Деталь: | ELA HOU-ADF |
Парткод: | JC96-03995B |
Деталь: | MEA UNIT-PLATEN COVER |
Парткод: | JC97-02651B |
Деталь: | MEA UNIT-ADF UPPER ASS0Y |
Парткод: | JC97-01581B |
Деталь: | ELA HOU-ADF LOWER ASS0Y |
Парткод: | JC96-03996B |
Деталь: | ELA HOU-ADF MOTOR ASS0Y |
Парткод: | JC96-02264A |
Деталь: | MEA UNIT-PICKUP ASS0Y |
Парткод: | JC97-01582A |
Деталь: | PMO-GUIDE PAPER |
Парткод: | JB72-00843A |
Деталь: | PMO-COVER OPEN |
Парткод: | JC72-00737A |
Деталь: | PMO-COVER SIDE L |
Парткод: | JC72-00739A |
Деталь: | PMO-COVER SIDE R |
Парткод: | JC72-00740A |
Деталь: | PMO-TX STACKER |
Парткод: | JC72-00745B |
Деталь: | IPR-WASHER SPRING CU |
Парткод: | JF70-10616A |
Деталь: | PMO-DOC GUIDE L |
Парткод: | JC72-00839D |
Деталь: | PMO-DOC GUIDE R |
Парткод: | JC72-00838D |
Деталь: | PMO-GEAR PINION |
Парткод: | JF72-41354A |
Деталь: | MEA UNIT-HINGE |
Парткод: | JC97-01731A |
Деталь: | RPR-ROLLER EXIT IDLE |
Парткод: | JC73-00091A |
Деталь: | IPR-SHAFT EXIT |
Парткод: | JC70-00242A |
Деталь: | NPR-SPRING PINCH DRIVE |
Парткод: | JB71-00038A |
Деталь: | PMO-COVER ADF UPPER |
Парткод: | JC72-00736B |
Деталь: | RMO-ADF RUBBER |
Парткод: | JB73-00052A |
Цена: | 70 ₽ |
Деталь: | PMO-HOLDER ADF |
Парткод: | JB72-00825A |
Деталь: | RPR-SPONGE ADF |
Парткод: | JB73-10913A |
Деталь: | SPRING ETC-COIL ADF |
Парткод: | JC61-00040A |
Деталь: | SHEET-ADF |
Парткод: | JC63-00079A |
Деталь: | SPRING ETC-TORSION DOC (CC2-F) |
Парткод: | JB61-00076A |
Деталь: | Ring-C |
Парткод: | 6044-000159 |
Деталь: | GEAR-ADF 38 |
Парткод: | JB66-00103A |
Цена: | 260 ₽ |
Деталь: | PMO-BUSH |
Парткод: | JB72-00819A |
Деталь: | MEC-ROLLER DRIVER |
Парткод: | JC75-00149A |
Деталь: | PMO-COVER ADF LOWER |
Парткод: | JC72-00735A |
Деталь: | PMO-ACTUATOR SENSOR DOC |
Парткод: | JB72-00837A |
Деталь: | PMO-ACTUATOR SENSOR REGI |
Парткод: | JC72-00747A |
Деталь: | MEC-ROLLER EXIT |
Парткод: | JC75-00150A |
Деталь: | GEAR-CLUTCH 29 |
Парткод: | JB66-00101A |
Деталь: | IPR-BRKT ADF MOTOR |
Парткод: | JC70-00224A |
Деталь: | PMO-WHITE CLUTCH SUB 29 |
Парткод: | JB72-00844A |
Деталь: | GEAR-CLUTCH 39 |
Парткод: | JC66-00322A |
Деталь: | GEAR-IDLE20/33 |
Парткод: | JG66-40038A |
Деталь: | GEAR-IDLE 17/35 |
Парткод: | JG66-40039A |
Деталь: | GEAR-IDLE25 |
Парткод: | JG66-40036A |
Деталь: | MOTOR STEP-ADF |
Парткод: | JC31-00017A |
Деталь: | PMO-COVER PLATEN |
Парткод: | JC72-00738A |
Деталь: | PPR-SPONG SHEET |
Парткод: | JC72-00751A |
Деталь: | SHEET ABS-SHEET PLATEN(PET) |
Парткод: | JC72-00750B |
Деталь: | IPR-SPRING PINCH |
Парткод: | JC70-00260A |
Деталь: | ICT-SHAFT PINCH |
Парткод: | JC70-00265A |
Деталь: | PMO-ROLL PINCH |
Парткод: | JG72-40663A |
Деталь: | PMO-BUSHING HOLDER |
Парткод: | JG72-40732A |
Деталь: | SPRING ETC-CLUTCH |
Парткод: | JC61-00062A |
Деталь: | GEAR-EXIT 23 |
Парткод: | JC66-00323A |
Деталь: | SPRING ETC-WHITE BAR |
Парткод: | JC61-00548A |
Деталь: | IPR-BRKT WHITE BAR |
Парткод: | JC70-00225A |
Деталь: | PPR-WHITE BAR SHEET |
Парткод: | JC72-00752A |
Деталь: | TAPE ETC-ANTI BRUSH |
Парткод: | JC02-00014A |
Деталь: | PBA SUB-ADF |
Парткод: | JC81-00437A |
Деталь: | PBA SUB-ADF POS SEN |
Парткод: | JC92-01365A |
Деталь: | PBA SUB-ADF DET SEN |
Парткод: | JC92-01366A |
Деталь: | CBF HARNESS-ADF ROLLER GND |
Парткод: | JC39-00187A |
Деталь: | CBF HARNESS-DRIVER GND |
Парткод: | JB39-00065A |
Деталь: | PMO-ACTUATOR SENSOR SCAN |
Парткод: | JC72-00746A |
Деталь: | NPR-SPRING GND |
Парткод: | JC71-00031A |
Деталь: | CBF D SUB CABLE-ADF_MAIN CABLE |
Парткод: | JC39-00190A |
Деталь: | GEAR-JAM REMOVE |
Парткод: | JC66-00329A |
Деталь: | GEAR-REDUCTION 45/19 |
Парткод: | JC66-00324A |
Деталь: | ELA HOU-SCANNER |
Парткод: | JC96-04180B |
Деталь: | ELA HOU-DADF |
Парткод: | JC96-02943B |
Деталь: | ELA HOU-OPE |
Парткод: | JC96-04170B |
Деталь: | ELA HOU-PLATEN |
Парткод: | JC96-04171A |
Деталь: | ELA HOU-BASE FRAME |
Парткод: | JC96-04010C |
Деталь: | PMO-BASE FRAME |
Парткод: | JC72-00779B |
Деталь: | PMO-COVER FRONT DUMMY |
Парткод: | JC72-00785B |
Деталь: | SPRING ETC-TORSION |
Парткод: | JC61-00486A |
Деталь: | PMO-BRACKET SIDE OPEN |
Парткод: | JC72-00781A |
Деталь: | Screw-Taptite |
Парткод: | 6003-000196 |
Деталь: | IPR-CHANNEL BASE FRAME |
Парткод: | JC70-00239A |
Деталь: | Screw-Taptite |
Парткод: | 6003-001256 |
Деталь: | Foot-ML80 |
Парткод: | JC61-40001A |
Деталь: | IPR-GROUND PLATE B(BASE) |
Парткод: | JC70-00241A |
Деталь: | Screw-Taptite |
Парткод: | 6003-000269 |
Деталь: | ELA M/M-AUD SPEAKER |
Парткод: | JC96-01607A |
Деталь: | BRACKET-M-PUSH DEVE |
Парткод: | JC61-00789A |
Деталь: | SPRING ETC-DEVE REAR |
Парткод: | JC61-00550A |
Деталь: | IPR-GROUND PLATE SCF |
Парткод: | JC70-00243A |
Деталь: | CBF Harness-SCF |
Парткод: | JC39-00082A |
Деталь: | FAN-DC CARDINAL |
Парткод: | JC31-00027B |
Деталь: | SHAFT-DEVE_BOTTOM |
Парткод: | JC66-00684A |
Деталь: | SPRING ETC-DEVE FRONT |
Парткод: | JC61-00551A |
Деталь: | HOLDER-M_ROLLER BOTTOM |
Парткод: | JC61-00855A |
Деталь: | HOLDER-CATCH CST(MC2) |
Парткод: | JC61-00857A |
Деталь: | BATTERY-NIH(2ND) |
Парткод: | 4302-001183 |
Деталь: | Stopper-M-Fan80 |
Парткод: | JC61-00667A |
Деталь: | PBA SUB-AIR_TMP |
Парткод: | JC92-01568A |
Деталь: | ELA HOU-FRAME MAIN |
Парткод: | JC96-04012B |
Деталь: | ELA HOU-FRAME MAIN |
Парткод: | JC96-04012A |
Деталь: | PMO-FRAME MAIN |
Парткод: | JC72-00800A |
Деталь: | PMO-LENS TONER SENSOR |
Парткод: | JC72-00803A |
Деталь: | PBA SUB-TONER_RX |
Парткод: | JC92-01360B |
Деталь: | IPR-GND OPC |
Парткод: | JC70-00216A |
Деталь: | HARNESS-OPC GND |
Парткод: | JC39-00592A |
Деталь: | Screw-Taptite |
Парткод: | 6003-000282 |
Деталь: | SCREW-TAPPING |
Парткод: | 6002-000175 |
Деталь: | PMO-CAP CONNECTOR L |
Парткод: | JC72-00463A |
Деталь: | PMO-CAP CONNECTOR U |
Парткод: | JC72-00465A |
Деталь: | IPR-GUARD C/O S/W |
Парткод: | JC70-00218A |
Деталь: | IPR-GND TERMINAL |
Парткод: | JC70-00219A |
Деталь: | CBF HARN ESS-COVER_SW |
Парткод: | JC39-00360A |
Деталь: | GEAR-EXIT, IDLE(Z17) |
Парткод: | JC66-40964A |
Цена: | 500 ₽ |
Деталь: | Screw-Taptite |
Парткод: | 6003-000154 |
Деталь: | GROUND-P-FUSER_MC2 |
Парткод: | JC63-00409A |
Деталь: | Ring-CS |
Парткод: | 6044-000001 |
Деталь: | SPRING ETC-CLUTCH |
Парткод: | JB61-70922A |
Деталь: | GEAR-EXIT/U,ID |
Парткод: | JC66-40211B |
Деталь: | IPR-GND EXIT |
Парткод: | JC70-00214A |
Деталь: | IPR-TERMINAL OPC |
Парткод: | JC70-00298A |
Деталь: | HOUSING-M-TERMINAL |
Парткод: | JC61-00723A |
Деталь: | IPR-TERMINAL GND |
Парткод: | JC70-00272A |
Деталь: | IPR-TERMINAL TR |
Парткод: | JC70-00271A |
Деталь: | IPR-TERMINAL BLADE |
Парткод: | JC70-00269A |
Деталь: | IPR-TERMINAL SUPPLY |
Парткод: | JC70-00270A |
Деталь: | PMO-HOUSING TERMINAL |
Парткод: | JC72-41010A |
Деталь: | IPR-TERMINAL FU |
Парткод: | JC70-10961A |
Деталь: | NUT-HEXAGON |
Парткод: | 6021-000222 |
Деталь: | SCREW-MACHINE |
Парткод: | 6006-000127 |
Деталь: | HARNESS-FUSER |
Парткод: | JC39-00600A |
Деталь: | HARNESS-FUSER |
Парткод: | JC39-00600B |
Деталь: | HARNESS-OPC_FUSER |
Парткод: | JC39-00593A |
Деталь: | CBF Harness-Therm |
Парткод: | JC39-00377A |
Деталь: | HARNESS-H_VOLTAGE |
Парткод: | JC39-00589A |
Деталь: | ELA HOU-ENGINE DRIVE |
Парткод: | JC96-04183A |
Деталь: | MOTOR STEP-MCK2(MAIN) |
Парткод: | JC31-00020C |
Деталь: | PMO-IMPELLER_DRV |
Парткод: | JC72-00825A |
Деталь: | GEAR-71/23 |
Парткод: | JC66-00345A |
Деталь: | GEAR-OPC53/37 |
Парткод: | JC66-00580A |
Деталь: | GEAR-86/23 |
Парткод: | JC66-00337A |
Деталь: | Ring-E |
Парткод: | 6044-000231 |
Деталь: | GEAR-31/19 |
Парткод: | JC66-00350A |
Деталь: | GEAR-RDCN FEED INNER |
Парткод: | JC66-00342A |
Деталь: | GEAR-DEVE DRV |
Парткод: | JC66-00338A |
Деталь: | GEAR-HUB CLUTCH |
Парткод: | JC66-00340A |
Цена: | 220 ₽ |
Деталь: | PMO-DEV/COUPLING |
Парткод: | JC72-00743A |
Деталь: | GEAR-RDCN FEED OUTER |
Парткод: | JC66-00343A |
Деталь: | GEAR-OPC DRV |
Парткод: | JC66-00347A |
Деталь: | MEC-BRAKE GEAR |
Парткод: | JC75-00163A |
Деталь: | GEAR-OPC 55/31 |
Парткод: | JC66-00581A |
Деталь: | BRACKET-P-BRAKE |
Парткод: | JC61-00853A |
Деталь: | GEAR-FEED DRV |
Парткод: | JC66-00348A |
Деталь: | GEAR-FUSER DRV INNER |
Парткод: | JC66-00333A |
Деталь: | GEAR-GEAR FUSER DRV OUTER |
Парткод: | JC66-00334A |
Деталь: | GEAR-SWING DRV |
Парткод: | JC66-00349A |
Деталь: | GEAR-EXIT/U,ID |
Парткод: | JC66-40211B |
Деталь: | LINK-P-DUPLEX |
Парткод: | JC66-00576A |
Деталь: | Ring-C |
Парткод: | 6044-000159 |
Деталь: | ELA HOU-DADF SUB |
Парткод: | JC96-02973B |
Деталь: | MEA UNIT-COVER OPEN |
Парткод: | JC97-01844B |
Деталь: | GUIDE-SCAN |
Парткод: | JC61-00738B |
Деталь: | GROUND-P_SCAN ROLLER |
Парткод: | JC63-00249A |
Деталь: | GROUND-P_EXIT ROLLER |
Парткод: | JC63-00250A |
Деталь: | PBA SUB-SENSOR_IF |
Парткод: | JC92-01556A |
Деталь: | IPR-BRKT WHITE BAR |
Парткод: | JC70-00225A |
Деталь: | SPRING ETC-WHITE BAR |
Парткод: | JC61-00548A |
Деталь: | SHEET-GUIDE PAPER |
Парткод: | JC63-00185A |
Деталь: | ROLLER-EXIT |
Парткод: | JC66-00588A |
Деталь: | GEAR-DADF_EXIT31 |
Парткод: | JC66-00571A |
Деталь: | MEA UNIT-COVER EXIT |
Парткод: | JC97-01841B |
Деталь: | ROLLER-SCAN |
Парткод: | JC66-00585A |
Деталь: | PMO-BUSHING HOLDER |
Парткод: | JG72-40732A |
Деталь: | SPRING ETC-CLUTCH |
Парткод: | JC61-00062A |
Деталь: | GEAR-DADF_SCAN31 |
Парткод: | JC66-00570A |
Деталь: | MEA UNIT-PICK_UP |
Парткод: | JC97-01848A |
Деталь: | MEP-CLUTCH SMALL |
Парткод: | JC47-00003C |
Деталь: | ELA HOU-DUPLEX MOTOR |
Парткод: | JC96-02940A |
Деталь: | MOTOR STEP-DUPLEX |
Парткод: | JC31-00034A |
Деталь: | IPR-GUARD C/O S/W |
Парткод: | JC70-00218A |
Деталь: | CBF HARNESS-COVER_OPEN |
Парткод: | JC39-00332A |
Деталь: | MOTOR STEP-DADF |
Парткод: | JC31-00033A |
Деталь: | ELA HOU-DADF MOTOR |
Парткод: | JC96-02941A |
Деталь: | COVER-P GEAR |
Парткод: | JC63-00307A |
Деталь: | GEAR-DADF24(A) |
Парткод: | JC66-00565A |
Деталь: | PMO-GATE DUPLEX |
Парткод: | JC72-01255A |
Деталь: | PBA SUB-DADF |
Парткод: | JC92-01554B |
Деталь: | CBF HARNESS-CLUTCHJF |
Парткод: | JC39-00327A |
Деталь: | CBF D SUB CABLE-DADF |
Парткод: | JC39-00359A |
Деталь: | PMO-ACTUATOR SCAN |
Парткод: | JC72-01249A |
Деталь: | PMO-ACTUATOR DUPLEX |
Парткод: | JC72-01263A |
Деталь: | CBF HARNESS-DADF_GND |
Парткод: | JC39-00334A |
Деталь: | ROLLER-DUPLEX |
Парткод: | JC66-00589A |
Деталь: | GUIDE-DUPLEX_INNER |
Парткод: | JC61-00737B |
Деталь: | GUIDE-DUPLEX_LOWER |
Парткод: | JC61-00735B |
Деталь: | MEA UNIT-GUIDE DUPLEX |
Парткод: | JC97-01843A |
Деталь: | MEA UNIT-GUIDE_P UP |
Парткод: | JC97-01847B |
Деталь: | MEA UNIT-SUPPORT P UP |
Парткод: | JC97-01845B |
Деталь: | BUSH-10_D |
Парткод: | JC61-00720A |
Деталь: | BUSH-6_D |
Парткод: | JC61-00423A |
Деталь: | BUSH-6_D(L) |
Парткод: | JC61-00884A |
Деталь: | SHAFT-GATE_DUPLEX |
Парткод: | JC66-00683A |
Деталь: | SHAFT-REGI |
Парткод: | JC66-00662A |
Деталь: | CBF HARNESS-SENSOR_IF |
Парткод: | JC39-00344A |
Деталь: | Cover-Open |
Парткод: | JC63-00195B |
Деталь: | PMO-STOPPER EXIT |
Парткод: | JC72-41396B |
Деталь: | ROLLER-REGI |
Парткод: | JC66-00587A |
Деталь: | PMO-LEVER OPEN |
Парткод: | JC72-01256B |
Деталь: | SPRING ETC-KNOCKUP,MP |
Парткод: | JC61-00483A |
Деталь: | PBA SUB-REGI |
Парткод: | JC92-01561A |
Деталь: | PMO-ACTUATOR REGI |
Парткод: | JC72-01261A |
Деталь: | COVER-SENSOR |
Парткод: | JC63-00197B |
Деталь: | SPRING ETC-TORSION DOC (CC2-F) |
Парткод: | JB61-00076A |
Деталь: | Ring-E |
Парткод: | 6044-000125 |
Деталь: | GROUND-P DUPLEX |
Парткод: | JC63-00315A |
Деталь: | COVER-HARNESS |
Парткод: | JC63-00408B |
Деталь: | CBF Harness-Liu Gnd |
Парткод: | JB39-00103A |
Деталь: | COVER-EXIT |
Парткод: | JC63-00196B |
Деталь: | PMO-ROLLER IDLE SCAN |
Парткод: | JC72-00906A |
Деталь: | SHAFT-EXIT IDLE |
Парткод: | JC66-00661A |
Деталь: | TAPE ETC-ANTI BRUSH |
Парткод: | JC02-00014A |
Деталь: | GROUND-P-EXIT COVER |
Парткод: | JC63-00203A |
Деталь: | GUIDE-PICK_UP_UPPER |
Парткод: | JC61-00733B |
Деталь: | MEA UNIT-HOLDER RUB |
Парткод: | JC97-01846B |
Деталь: | PBA SUB-PAPER SEN |
Парткод: | JC92-01783A |
Деталь: | PBA SUB-EXIT_OPEN |
Парткод: | JC92-01564A |
Деталь: | PMO-ACTUATOR DOC |
Парткод: | JC72-01248A |
Деталь: | GUIDE-PICK_UP_LOWER |
Парткод: | JC61-00732B |
Деталь: | SUPPORT-PICK UP |
Парткод: | JC61-00742B |
Деталь: | SPRING ETC-PICKUP |
Парткод: | JC61-00482A |
Деталь: | GUIDE-DOC SENSOR |
Парткод: | JC61-00788B |
Деталь: | ELA HOU-FUSER E_COIL |
Парткод: | JC96-03022C |
Деталь: | ELA HOU-FUSER E_COIL |
Парткод: | JC96-03021C |
Деталь: | ELA UNIT-HEAT ROLLER |
Парткод: | JC96-03023C |
Деталь: | ELA UNIT-HEAT ROLLER |
Парткод: | JC96-03020C |
Деталь: | MEA UNIT-ACTUATOR |
Парткод: | JC97-01611B |
Деталь: | PEX-Roller F/Up(2) |
Парткод: | JC72-20902A |
Цена: | 500 ₽ |
Деталь: | IPR-PIN ROLLER EXIT |
Парткод: | JC70-00064A |
Деталь: | MEA UNIT-CLAW |
Парткод: | JC97-01587B |
Деталь: | BRUSH-CARBON |
Парткод: | JC67-00067A |
Деталь: | Spring-CS |
Парткод: | 6107-001172 |
Деталь: | SCREW-MACHINE |
Парткод: | 6001-000667 |
Деталь: | COVER-M-BRUSH |
Парткод: | JC63-00353A |
Деталь: | Screw-Taptite |
Парткод: | 6003-000196 |
Деталь: | ELECTRODE-P-FRONT |
Парткод: | JC70-00469A |
Деталь: | THERMOSTAT |
Парткод: | 4712-001027 |
Деталь: | SCREW-MACHINE |
Парткод: | 6006-001031 |
Деталь: | THERMISTOR-NTC |
Парткод: | 1404-001340 |
Деталь: | NPR-ELECTRODE M |
Парткод: | JC71-00030A |
Деталь: | Screw-Taptite |
Парткод: | 6003-000282 |
Деталь: | ELECTRODE-P-GEAR |
Парткод: | JC70-00470A |
Деталь: | PMO-UPPER FUSER |
Парткод: | JC72-01318A |
Деталь: | NUT-HEXAGON |
Парткод: | 6021-000222 |
Деталь: | SPRING ETC-ACTUATOR6G |
Парткод: | JC61-00485A |
Деталь: | LEVER-M-JAM R |
Парткод: | JC66-00679A |
Деталь: | Roller-Pressure |
Парткод: | JC66-00691A |
Цена: | 1 900 ₽ |
Деталь: | PMO-LOWER FUSER |
Парткод: | JC72-01316A |
Деталь: | IPR-GROUND FU |
Парткод: | JC70-00259A |
Деталь: | SPRING ETC-PR(7300) |
Парткод: | JC61-00056A |
Деталь: | BEARING-PRESSURE/R |
Парткод: | JC66-10901A |
Цена: | 140 ₽ |
Деталь: | PMO-GUIDE INPUT |
Парткод: | JC72-00817A |
Деталь: | LEVER-M-JAM F |
Парткод: | JC66-00678A |
Деталь: | BUSH-HEAT ROLLER |
Парткод: | JC61-01702A |
Деталь: | SPRING ETC-SAPERATION |
Парткод: | JC61-70909A |
Деталь: | PMO-GUIDE CLAW |
Парткод: | JC72-00376B |
Деталь: | ELA HOU-PICK UP PLUS |
Парткод: | JC96-02715C |
Деталь: | IPR-GND FEED |
Парткод: | JC70-00238A |
Деталь: | IPR-GND INPUT |
Парткод: | JC70-00235A |
Деталь: | IPR-GUIDE INPUT |
Парткод: | JC70-00222A |
Деталь: | PMO-M-ACTUATOR_NO PAPER |
Парткод: | JC72-01313A |
Деталь: | PBA SUB-TONER_TX |
Парткод: | JC92-01359A |
Деталь: | PBA SUB-PTL |
Парткод: | JC92-01361A |
Деталь: | PMO-FEED SENSOR |
Парткод: | JC72-00721A |
Деталь: | PMO-GUIDE PAPER |
Парткод: | JC72-00722B |
Деталь: | PMO-HOLDER SENSOR FEED |
Парткод: | JC72-00726A |
Деталь: | PMO-LENS TONER SENSOR |
Парткод: | JC72-00803A |
Деталь: | PMO-PTL PATH |
Парткод: | JC72-00822A |
Деталь: | PMO-BUSHING_P/U,MP |
Парткод: | JC72-41364A |
Деталь: | HOUSING-M-PICKUP LARGE |
Парткод: | JC61-00822A |
Деталь: | HOUSING-M-PICKUP SMALL |
Парткод: | JC61-00823A |
Деталь: | ELA HOU-SCAN UPPER |
Парткод: | JC96-04034B |
Деталь: | ELA HOU-SCAN LOWER |
Парткод: | JC96-04172A |
Деталь: | PMO-COVER SCAN UPPER |
Парткод: | JC72-00758B |
Деталь: | MEA UNIT-DUMMY UPPER |
Парткод: | JC97-02800A |
Деталь: | SHEET ABS-REGI_EDGE |
Парткод: | JC72-00809B |
Деталь: | Screw-Taptite |
Парткод: | 6003-000196 |
Деталь: | TAPE ETC-DOUBLE TAPE SMALL |
Парткод: | JC02-00013A |
Деталь: | TAPE ETC-DOUBLE TAPE LARGE |
Парткод: | JC02-00012A |
Деталь: | MCT-GLASS SCANNER(LEGAL) |
Парткод: | JC74-00018A |
Деталь: | COVER-SCAN LOWER |
Парткод: | JC63-00157B |
Деталь: | PMO-COVER DUMMY LOWER |
Парткод: | JC72-00753B |
Деталь: | ICT-INSERT SHAFT |
Парткод: | JB70-00154A |
Деталь: | PMO-PULLEY |
Парткод: | JB72-00763A |
Деталь: | PMO-HOLDER BELT |
Парткод: | JB72-00764A |
Деталь: | Ring-E |
Парткод: | 6044-000125 |
Деталь: | ELA HOU-CCD MODULE |
Парткод: | JC96-02759B |
Деталь: | Belt-Timing Gear |
Парткод: | 6602-001090 |
Деталь: | IPR-HOLDER GLASS |
Парткод: | JB70-00148A |
Деталь: | HOLDER-M-CCD(UMAX) |
Парткод: | JC61-00703A |
Деталь: | SPRING ETC-EXIT |
Парткод: | JB61-70939A |
Деталь: | IPR-BRK SCAN BD |
Парткод: | JC70-00228A |
Деталь: | COVER-CCD CABLE |
Парткод: | JC63-00158B |
Деталь: | PMO-LEVER SENSOR |
Парткод: | JC72-00755A |
Деталь: | SPRING ETC-BELT |
Парткод: | JB61-00059A |
Деталь: | SCREW-TAPPING |
Парткод: | 6002-000175 |
Деталь: | ELA HOU-SCAN MOTOR |
Парткод: | JC96-02751A |
Деталь: | CABLE CLAMP |
Парткод: | 6502-000121 |
Деталь: | Screw-Taptite |
Парткод: | 6003-001256 |
Деталь: | CBF Harness-Ope |
Парткод: | JC39-00340A |
Деталь: | CBF HARNESS-SCAN MOTOR |
Парткод: | JB39-00077A |
Деталь: | CBF HARNESS-DRIVER GND |
Парткод: | JB39-00065A |
Деталь: | CBF SIGNAL-CCD FFC |
Парткод: | JC39-00236A |
Деталь: | CBF HARNESS-SCAN_DSUB |
Парткод: | JC39-00338A |
Деталь: | ELA UNIT-CORE |
Парткод: | JB96-01381A |
Деталь: | SHAFT-CCD(UMAX) |
Парткод: | JC66-00532A |
Деталь: | IPR-CHANNEL BASE FRAME |
Парткод: | JC70-00239A |
Деталь: | PMO-DUMMY UPPER |
Парткод: | JC72-00759D |
Деталь: | MCT-GLASS ADF |
Парткод: | JC74-00019A |
Деталь: | SHEET-DUMMY UPPER |
Парткод: | JC63-00074A |
Деталь: | BRACKET-MOTOR PLATEN |
Парткод: | JC61-00702A |
Деталь: | Screw-Taptite |
Парткод: | 6003-000269 |
Деталь: | GEAR-IDLE |
Парткод: | JB66-00083A |
Деталь: | GEAR-REDUCTION73/37 |
Парткод: | O CO LO o o CO CO o |
Деталь: | GEAR-TIMING |
Парткод: | JC66-00531A |
Деталь: | MOTOR STEP-SCAN |
Парткод: | JB31-00011A |
Цена: | 1 300 ₽ |
Деталь: | ELA HOU-MP |
Парткод: | JC96-02182B |
Деталь: | Screw-Taptite |
Парткод: | 6003-000266 |
Деталь: | Ring-E |
Парткод: | 6044-000125 |
Деталь: | Solenoid-MP |
Парткод: | JC33-00006A |
Деталь: | Spring ETC--Cam MP |
Парткод: | JC61-00003A |
Деталь: | SPRING ETC-KNOCKUP,MP |
Парткод: | JC61-00483A |
Деталь: | IPR-BRACKET SOLENOIDE |
Парткод: | JC70-00237A |
Деталь: | PMO-HOLDER CAM MPF |
Парткод: | JC72-00055A |
Деталь: | PMO-GEAR P/U MPF |
Парткод: | JC72-00056A |
Деталь: | PMO-ROLLER CAM.MP |
Парткод: | JC72-00761A |
Деталь: | PMO-ACTUATOR,MP |
Парткод: | JC72-00767A |
Деталь: | PMO-ADJUSTER,MP |
Парткод: | JC72-00768A |
Деталь: | PMO-CAM PICK UP,MP |
Парткод: | JC72-00769A |
Деталь: | PMO-FRAME MP |
Парткод: | JC72-00770B |
Деталь: | PMO-HOLDER SENSOR,MP |
Парткод: | JC72-00772A |
Деталь: | PMO-HOUSING PICK UP,MP |
Парткод: | JC72-00773A |
Деталь: | PMO-PLATE KNOCK UP,MP |
Парткод: | JC72-00775A |
Деталь: | PMO-Idle Pick Up MP |
Парткод: | JC72-41027A |
Деталь: | RPR-RUBBER PICK UP,MP |
Парткод: | JC73-00089A |
Деталь: | RPR-RCT PAD PICKUP,MP |
Парткод: | JC73-00090A |
Деталь: | PAD-MP(PLUS) |
Парткод: | JC69-00494A |
Деталь: | PBA Sub-Mp Sen |
Парткод: | JC92-01362A |
Деталь: | PMO-BUSHING_P/U,MP |
Парткод: | JC72-41364A |
Деталь: | ELA HOU-COVER PLATEN |
Парткод: | JC96-02942B |
Деталь: | COVER-PLATEN |
Парткод: | JC63-00198B |
Деталь: | PMO-EXTENTION PLATEN |
Парткод: | JC72-01251B |
Деталь: | GUIDE-EXTENTION |
Парткод: | JC61-00746B |
Деталь: | PPR-SPONG SHEET |
Парткод: | JC72-00751A |
Деталь: | PMO-ROLL PINCH |
Парткод: | JG72-40663A |
Деталь: | IPR-P_PINCH(SCAN) |
Парткод: | JC70-00468A |
Деталь: | SHAFT-PINCH |
Парткод: | JC66-00659A |
Деталь: | PMO-ACTUATOR SENSOR SCAN |
Парткод: | JC72-00746A |
Деталь: | PBA SUB-GATE |
Парткод: | JC92-01562A |
Деталь: | MEA UNIT-HINGE(MCK2) |
Парткод: | JC97-01839A |
Деталь: | PLATE-P-DUMMY PLATEN |
Парткод: | JC61-00819A |
Деталь: | SPRING ETC-CHARGE |
Парткод: | JC61-70925A |
Деталь: | SPRING ETC-TORSION DOC (CC2-F) |
Парткод: | JB61-00076A |
Деталь: | ELA HOU-DADF |
Парткод: | JC96-02943B |
Деталь: | ELA HOU-COVER PLATEN |
Парткод: | JC96-02942B |
Деталь: | Cover-Front |
Парткод: | JC63-00200B |
Деталь: | Cover-Rear |
Парткод: | JC63-00201B |
Деталь: | ELA HOU-DADF SUB |
Парткод: | JC96-02973B |
Деталь: | MEA UNIT-TX STACKER |
Парткод: | JC97-01840B |
Деталь: | PMO-TX STACKER |
Парткод: | JC72-01253B |
Деталь: | GUIDE-DOC_LEFT |
Парткод: | JC61-00739B |
Деталь: | GUIDE-DOC_RIGHT |
Парткод: | JC61-00740B |
Деталь: | IPR-WASHER SPRING CU |
Парткод: | JF70-10616A |
Деталь: | PMO-GEAR PINION |
Парткод: | JF72-41354A |
Деталь: | PMO-ACTUATOR LENGTH |
Парткод: | JC72-01250B |
Деталь: | PMO-TX STACKER LOWER |
Парткод: | JC72-01254B |
Деталь: | SPRING ETC-TORSION DOC (CC2-F) |
Парткод: | JB61-00076A |
Деталь: | ELA HOU-OPE |
Парткод: | JC96-04170B |
Деталь: | COVER-DUMMY |
Парткод: | JC63-01155B |
Деталь: | Cover-OPE |
Парткод: | JC63-01156B |
Деталь: | KEY-M_STOP CLEAR |
Парткод: | JC64-00242A |
Деталь: | KEY-M_START BLACK |
Парткод: | JC64-00243A |
Деталь: | KEY-M_TEL |
Парткод: | JC64-00239A |
Деталь: | KEY-M_FAX |
Парткод: | JC64-00241A |
Деталь: | KEY-M_ON HOOK |
Парткод: | JC64-00249A |
Деталь: | KEY-M_MENU |
Парткод: | JC64-00248A |
Деталь: | LENS-STATUS |
Парткод: | JC67-00198A |
Деталь: | RUBBER-TEL |
Парткод: | JC73-00246A |
Деталь: | RUBBER-MODE |
Парткод: | JC73-00247A |
Деталь: | RUBBER-MENU |
Парткод: | JC73-00230A |
Деталь: | Cover-LCD |
Парткод: | JC63-01157A |
Деталь: | KEY-M_MODE SCAN |
Парткод: | JC64-00247A |
Деталь: | KEY-M_MODE COPY |
Парткод: | JC64-00245A |
Деталь: | KEY-M_MODE FAX |
Парткод: | JC64-00246A |
Деталь: | RUBBER-FAX |
Парткод: | JC73-00248A |
Деталь: | RUBBER-EMAIL |
Парткод: | JC73-00245A |
Деталь: | ELA UNIT-OPE |
Парткод: | JC96-03994C |
Деталь: | PBA SUB-OPE |
Парткод: | JC92-01791D |
Деталь: | Screw-Taptite |
Парткод: | 6003-000196 |
Деталь: | MEA UNIT-FEED ROLLER |
Парткод: | JC97-01850A |
Деталь: | PMO-FRAME FEED |
Парткод: | JC72-00821A |
Деталь: | Gear-Feed |
Парткод: | JC66-00332A |
Деталь: | GEAR-MP/DUP DRV |
Парткод: | JC66-00346A |
Деталь: | ICT-SHAFT FEED |
Парткод: | JC70-00267A |
Деталь: | PMO-BUSHING_P/U,MP |
Парткод: | JC72-41364A |
Деталь: | Ring-E |
Парткод: | 6044-000125 |
Деталь: | Ring-CS |
Парткод: | 6044-000001 |
Деталь: | BRACKET-PM_FEED(25) |
Парткод: | JC61-00849A |
Деталь: | PMO-ROLLER FEED |
Парткод: | JC72-00727A |
Деталь: | PMO-HOLDER PINCH SUB |
Парткод: | JC72-00725A |
Деталь: | PMO-ROLLER FEED L |
Парткод: | JC72-40261A |
Деталь: | HOLDER-PUSH_FEED_CST |
Парткод: | JC61-00871A |
Деталь: | PMO-HOLDER PINCH M |
Парткод: | JC72-00724A |
Деталь: | PMO-SUB HOLDER FEED |
Парткод: | JC72-40266A |
Деталь: | SPRING ETC-FEED MP |
Парткод: | JC61-00481A |
Деталь: | Washer-Plain |
Парткод: | 6031-000021 |
Деталь: | PMO-ROLLER FEED S |
Парткод: | JC72-40262A |
Деталь: | IPR-SHAFT FEED IDLER |
Парткод: | JC70-10230A |
Деталь: | SHEET-FEEDER |
Парткод: | JC63-00259A |
Деталь: | PMO-ROLLER PINCH FEED |
Парткод: | JC72-01315A |
Деталь: | Ring-C |
Парткод: | 6044-000159 |
Деталь: | ELA HOU-SIDE COVER |
Парткод: | JC96-02183D |
Деталь: | MEA UNIT-DUPLEX |
Парткод: | JC97-01578B |
Деталь: | MEA UNIT-SIDE SUB |
Парткод: | JC97-01909B |
Деталь: | IPR-E-PLATE SAW(MCK2) |
Парткод: | JC70-10232D |
Деталь: | IPR-BRACKET GUIDE B |
Парткод: | JC70-00234A |
Деталь: | PMO-HOLDER SAW |
Парткод: | JC72-41213B |
Деталь: | IPR-BRACKET GUIDE A |
Парткод: | JC70-00229A |
Деталь: | PMO-FEED FRAME |
Парткод: | JC72-00731A |
Деталь: | SPRING ETC-FEED |
Парткод: | JC61-00478A |
Деталь: | PMO-Bushing Feed |
Парткод: | JC72-00730A |
Деталь: | GEAR-DUP IDLER 17 |
Парткод: | JC66-00341A |
Деталь: | GEAR-MP/DUP DRV |
Парткод: | JC66-00346A |
Деталь: | PMO-GUIDE DP SIDE |
Парткод: | JC72-00806A |
Деталь: | GUIDE-SIDE_PUSH |
Парткод: | JC61-00919B |
Деталь: | PMO-LOCKER OPEN |
Парткод: | JC72-00762D |
Деталь: | PMO-LOCKER SIDE R |
Парткод: | JC72-00763C |
Деталь: | SPRING ETC-LOCKER TORSION |
Парткод: | JC61-00479A |
Деталь: | PMO-TIE STOPPER |
Парткод: | JC72-00766A |
Деталь: | MEA UNIT-TRAY |
Парткод: | JC97-01577C |
Деталь: | Ring-CS |
Парткод: | 6044-000001 |
Деталь: | IPR-BRKT GROUND TR |
Парткод: | JC70-00231A |
Деталь: | PMO-BUSHING TX(B4) |
Парткод: | JG72-40744A |
Деталь: | IPR-BRKT GROUND A |
Парткод: | JC70-00232A |
Деталь: | PMO-SHAFT DUP DRIVER |
Парткод: | JC72-00764A |
Деталь: | RPR-RUBBER EXIT |
Парткод: | JC73-10203A |
Деталь: | IPR-BRKT G DUP |
Парткод: | JC70-00233A |
Деталь: | PMO-GP LOWER DP |
Парткод: | JC72-00732A |
Деталь: | PMO-ROLLER_EXIT |
Парткод: | JC72-40361A |
Деталь: | SPRING ETC-FUSER EXIT |
Парткод: | JC61-70976A |
Деталь: | CBF HARNESS-OPE GND |
Парткод: | JC39-00036A |
Деталь: | IPR-BRKT GROUND B |
Парткод: | JC70-00230A |
Деталь: | PMO-TRAY CASE MP |
Парткод: | JC72-00776B |
Деталь: | PMO-TRAY EXT MP |
Парткод: | JC72-00778D |
Деталь: | PMO-SIDE GUIDE MP |
Парткод: | JC72-00547A |
Деталь: | PMO-TRAY COVER MP |
Парткод: | JC72-00777D |
Деталь: | IPR-GUIDE LATCH |
Парткод: | JB70-10906A |
Деталь: | PMO-TRAY LINK MP |
Парткод: | JC72-00857C |
Коды ошибок
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Описание
Error code: | 01 |
Display: | ERROR CONDITION INVALID HEAD |
Description: | The ERROR light flashes. |
Causes: | The printhead was replaced with one that is not a genuine Zebra™ printhead. |
Remedy: | Install a genuine Zebra printhead. |
Error code: | 02 |
Display: | ERROR CONDITION RIBBON OUT |
Description: | The printer stops; the ERROR light flashes. |
Causes: | In thermal transfer mode, ribbon is not loaded or incorrectly loaded. In thermal transfer mode, the ribbon sensor is not detecting ribbon that is loaded incorrectly. In thermal transfer mode, media is blocking the ribbon sensor. In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly. |
Remedy: | Load ribbon correctly. 1. Load ribbon correctly. See Load Ribbon on page 64. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Load media correctly. See Load Media on page 58. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Print a sensor profile. See Print Sensor Profile on page 89. The ribbon out threshold (marked by the word RIBBON) is likely too high, above the black area that indicates where the ribbon is detected. 2. Calibrate the sensors or load printer defaults. See Calibrate Media and Ribbon Sensor Sensitivity on page 90 or LOAD DEFAULTS on page 73. |
Error code: | 03 |
Display: | WARNING RIBBON IN |
Description: | The ERROR light flashes. |
Causes: | Ribbon is loaded, but the printer is set for direct thermal mode. |
Remedy: | Ribbon is not required with direct thermal media. If you are using direct thermal media, remove the ribbon. This error message will not affect printing. If you are using thermal transfer media, which requires ribbon, set the printer for Thermal Transfer mode. See Select Print Method on page 81. |
Error code: | 04 |
Display: | ERROR CONDITION PAPER OUT |
Description: | The printer stops; the ERROR light flashes. |
Causes: | The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded. |
Remedy: | Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration. |
Error code: | 05 |
Display: | ERROR CONDITION HEAD OPEN |
Description: | The printer stops; the ERROR light flashes. |
Causes: | The printhead is not fully closed. The head open sensor is not working properly. |
Remedy: | Replace the sensor. |
Error code: | 06 |
Display: | THERMISTOR FAULT |
Description: | The ERROR light flashes. |
Causes: | The printhead has a faulty thermistor. |
Remedy: | Replace the printhead. |
Error code: | 07 |
Display: | WARNING HEAD COLD, THERMISTOR FAULT, ERROR CONDITION HEAD ELEMENT BAD |
Description: | The printer stops; the ERROR light is on; the printer cycles through these three messages. |
Causes: | The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
Remedy: | Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
Error code: | 08 |
Display: | WARNING HEAD COLD |
Description: | The printer prints while the ERROR light flashes. |
Causes: | The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
Remedy: | Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
Error code: | 09 |
Display: | WARNING HEAD TOO HOT |
Description: | The printer stops; the ERROR light flashes. |
Causes: | The printhead is over temperature. |
Remedy: | Allow the printer to cool. Printing automatically resumes when the printhead elements cool to an acceptable operating temperature. |
Error code: | 10 |
Display: | DEFRAGMENTING |
Description: | The printer stops. |
Causes: | The printer is defragmenting memory. |
Remedy: | Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service. |
Error code: | 11 |
Display: | ERROR CONDITION CUTTER JAM |
Description: | The printer stops; the ERROR light flashes. |
Causes: | Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers. The cutter blade is in the media path. |
Remedy: | Turn off the printer power and unplug the printer. Inspect the cutter module for debris and clean as needed following the cleaning instructions in Clean the Cutter Module on page 135. |
Error code: | 12 |
Description: | General print quality issues |
Causes: | The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced. |
Remedy: | For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance. |
Error code: | 13 |
Description: | Long tracks of missing print on several labels |
Causes: | Print element damaged. |
Remedy: | Replace the printhead. |
Error code: | 14 |
Description: | Wrinkled ribbon |
Causes: | Ribbon fed through the machine incorrectly. Incorrect burn temperature. Incorrect or uneven printhead pressure. Media not feeding properly; walking from side to side. The strip plate needs adjusting. The printhead needs vertical adjustment. The printhead is improperly balanced. The printhead and platen roller need to be realigned. |
Remedy: | See Load Ribbon on page 64. Set the darkness to the lowest possible setting for good print quality. See Adjust Print Darkness on page 78. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Make sure that media is snug by adjusting the media guide, or call a service technician. Adjust the printhead balance. |
Error code: | 15 |
Description: | Printing too light or too dark over the entire label |
Causes: | The media or ribbon is not designed for high-speed operation. You are using an incorrect combination of media and ribbon for your application. You are using ribbon with direct thermal media. Incorrect or uneven printhead pressure. |
Remedy: | Replace supplies with those recommended for high-speed operation. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. Direct thermal media does not require ribbon. To check if you are using direct thermal media, perform the label scratch test in When to Use Ribbon on page 62. Set the pressure to the minimum needed. See Adjust Printhead Pressure on page 70. |
Error code: | 16 |
Description: | Smudge marks on labels |
Causes: | The media or ribbon is not designed for high-speed operation. |
Remedy: | Replace supplies with those recommended for high-speed operation. |
Error code: | 17 |
Description: | Misregistration/skips labels |
Causes: | The printer is not calibrated. Improper label format. |
Remedy: | Recalibrate the printer. Use correct label format. |
Error code: | 18 |
Description: | Misregistration and misprint of one to three labels |
Causes: | The platen roller is dirty. Media does not meet specifications. |
Remedy: | See Clean the Printhead and Platen Roller on page 131. Use media that meets specifications. |
Error code: | 19 |
Description: | Vertical drift in top-of-form position |
Causes: | The printer is out of calibration. Vertical drift occurs during normal printer operation. Note • A vertical drift of ± 4 to 6 dot rows (approximately 0.5 mm) is within normal tolerances. The platen roller is dirty. |
Remedy: | Recalibrate the printer. Calibrate the printer. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. |
Error code: | 20 |
Description: | Vertical image or label drift |
Causes: | The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media. |
Remedy: | Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation. |
Error code: | 21 |
Description: | The bar code printed on a label does not scan. |
Causes: | The bar code is not within specifications because the print is too light or too dark. Not enough blank space around the bar code. |
Remedy: | Perform the FEED Self Test on page 120. Adjust the darkness or print speed settings as necessary. Leave at least 1/8 in. (3.2 mm) between the bar code and other printed areas on the label and between the bar code and the edge of the label. |
Error code: | 22 |
Description: | Loss of printing registration on labels. Excessive vertical drift in top-of-form registration. |
Causes: | The platen roller is dirty. Media guides are positioned improperly. The media type is set incorrectly. The media is loaded incorrectly. |
Remedy: | Clean the platen roller according to the instructions in Clean the Printhead and Platen Roller on page 131. Ensure that the media guides are properly positioned. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. Load media correctly. See Load Media on page 58. |
Error code: | 23 |
Description: | Auto Calibrate failed. |
Causes: | Media or ribbon is loaded incorrectly. The sensors could not detect the media or ribbon. The sensors are dirty or positioned improperly. The sensors are dirty, or media is positioned improperly for the sensors to detect. The media type is set incorrectly. |
Remedy: | Ensure that media and ribbon are loaded correctly. Manually calibrate the printer. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Ensure that the sensors are clean and that media is positioned properly. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. |
Error code: | 24 |
Description: | A label format was sent to the printer but was not recognized. The DATA light does not flash. |
Causes: | The communication parameters are incorrect. |
Remedy: | Check the printer driver or software communications settings (if applicable). If you are using serial communication, check the serial port setting in the control panel menu. See Set Serial Communications on page 91. If you are using serial communication, make sure you are using a null modem cable or a null modem adapter. Using the control panel controls, check the protocol setting. It should be set to NONE. See Set Protocol on page 93. If a driver is used, check the driver communication settings for your connection. |
Error code: | 25 |
Description: | A label format was sent to the printer. Several labels print, then the printer skips, misplaces, misses, or distorts the image on the label. |
Causes: | The serial communication settings are incorrect. |
Remedy: | Ensure that the flow control settings match. Check the communication cable length. See Table 5 on page 48 for requirements. Check the printer driver or software communications settings (if applicable). |
Error code: | 26 |
Description: | A label format was sent to the printer but was not recognized. The DATA light flashes but no printing occurs. |
Causes: | The prefix and delimiter characters set in the printer do not match the ones in the label format. Incorrect data is being sent to the printer. |
Remedy: | Verify the prefix and delimiter characters. See Set Format Prefix Character on page 94 and Set Delimiter Character on page 95 for the requirements. Check the communication settings on the computer. Ensure that they match the printer settings. If the problem continues, check the label format. |
Error code: | 27 |
Description: | Broken or melted ribbon |
Causes: | Darkness setting too high. |
Remedy: | 1. Reduce the darkness setting. 2. Clean the printhead thoroughly. |
Error code: | 28 |
Description: | The printer does not detect when the ribbon runs out. In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly. |
Causes: | The ribbon-out threshold is set too high to detect the ribbon. On a sensor profile, the ribbon-out threshold (circled in Figure 15) appears above the black bars that indicate the ribbon. This happens if you calibrate the printer without ribbon and later insert ribbon without recalibrating the printer or loading printer defaults. |
Remedy: | 1. Print a sensor profile (see Print Sensor Profile on page 89), and note the location of the ribbon-out threshold (circled in Figure 15). 2. Calibrate the printer, this time using ribbon, or load printer defaults. See Calibrate Media and Ribbon Sensor Sensitivity on page 90 or LOAD DEFAULTS on page 73. Important • Loading defaults resets all printer parameters back to factory defaults. 3. Print another sensor profile, and compare it to the first one. 4. If the ribbon-out threshold is still too high, you may manually change the value. |
Error code: | 29 |
Description: | The ribbon light is on even though ribbon is loaded correctly. |
Causes: | The printer was not calibrated for the label and ribbon being used. |
Remedy: | Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. |
Error code: | 30 |
Description: | The LCD displays a language that I cannot read |
Causes: | The language parameter was changed through the control panel or a firmware command. |
Remedy: | 1. Press SETUP/EXIT to enter configuration mode. 2. Press MINUS (-). The printer displays the LANGUAGE parameter in the current language. Even if you cannot recognize the characters displayed, you can still scroll to another language. 3. Press SELECT to select the parameter. 4. Press PLUS (+) or MINUS (-) to scroll through the choices until you find a language that you can read. 5. Press SETUP/EXIT. The LCD displays SAVE CHANGES in the original language. 6. Press SETUP/EXIT again to exit configuration mode and save the changes (if the language does not change, you may need to scroll to a different save option by pressing PLUS (+) or MINUS (-) in the previous step). 7. Repeat this process, if necessary, until you reach the desired language. |
Error code: | 31 |
Description: | The LCD is missing characters or parts of characters |
Causes: | The LCD may need replacing. |
Remedy: | Run the Power-On Self Test on page 117 and check that the LCD display shows all characters. If not, replace the LCD. |
Error code: | 32 |
Description: | Changes in parameter settings did not take effect |
Causes: | Parameters are set incorrectly. A command turned off the ability to change the parameter. A command changed the parameter back to the previous setting. If the problem continues, there may be a problem with the main logic board. |
Remedy: | 1. Set parameters and save permanently. 2. Turn the printer off (O) and then on (I). Refer to the ZPL Programming Guide. Refer to the ZPL Programming Guide. Replace the main logic board. |
Error code: | 33 |
Description: | The printer fails to calibrate or detect the top of the label. |
Causes: | The printer was not calibrated for the label being used. The printer is configured for continuous media. The driver or software configuration is not set correctly. |
Remedy: | Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. Set the media type to noncontinuous media. See Set Media Type on page 81. Driver or software settings produce commands that can overwrite the printer configuration. Check the driver or software media-related setting. |
Error code: | 34 |
Description: | Non-continuous labels are being treated as continuous labels. |
Causes: | The printer was not calibrated for the media being used. The printer is configured for continuous media. |
Remedy: | Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. Set the media type to noncontinuous media. See Set Media Type on page 81. |
Error code: | 35 |
Description: | All lights are on, but nothing displays on the LCD, and the printer locks up. |
Causes: | Internal electronic or firmware failure. |
Remedy: | Turn the printer power off (O) and then on (I). If the printer locks up again, replace the main logic board. |
Error code: | 36 |
Description: | The printer locks up while running the Power-On Self Test. |
Causes: | Main logic board failure. |
Remedy: | Replace the main logic board. |
Error code: | 37 |
Description: | Non-continuous labels are being treated as continuous labels. |
Causes: | The printer is configured for continuous media. The printer was not calibrated for the media being used. |
Remedy: | Set the media type to noncontinuous media. See Set Media Type on page 56. Perform the calibration procedure in Calibrate Media and Ribbon Sensors on page 67. |
Error code: | 38 |
Description: | All lights are on, but nothing displays on the LCD, and the printer locks up. |
Causes: | Internal electronic or firmware failure. |
Remedy: | Turn the printer power Off (O) and then On (I). If the printer locks up again, replace the main logic board. |
Error code: | 39 |
Description: | The printer locks up while running the Power-On Self Test. |
Causes: | Main logic board failure. |
Remedy: | Replace the main logic board. |
Error code: | 40 |
Display: | Scanner locked |
Description: | 10-348 ERROR 40 FUSER MAIN LAMP FAILURE Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault, Clear <10-348 & 10-350> is run. |
Causes: | 1. Deformed paper sensor actuator or faulty sensor. 2. SMPS PBA or Main PBA is defective 3. Faulty cables or connectors. |
Remedy: | Switch printer power OFF. Remove the Fuser Assembly. Warning Fuser may be very hot. Use extreme caution to prevent burns. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Replace the Engine Control Board. |
Error code: | 41 |
Display: | Self Diagnostic LSU |
Description: | Install or Reseat Fuser, Code 41 Front thermistor open error. This is a cold condition. Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault is performed. |
Causes: | • Fuser • Engine Control Board |
Remedy: | 1 1. Turn OFF power and remove the Fuser Assembly. 2. Measure the resistance between the fuser connector P600-4 and P600-6. 3. Does the resistance measure between 30 K and 190 K Ohms? Go to step 2. Replace the fuser assembly. 2 1. Reinstall the fuser assembly. 2. Enter service diagnostics. 3. From the Sensor Tests run the Fuser Temperature test. 4. Is the temperature indicated approximately 165o C? Replace the engine control board. Go to step 3. 3 1. Turn OFF printer power. 2. Check for an open circuit or poor connection between J600-4 to J600-6 to J404A-2. 3. Is the wiring OK? Replace the engine control board. Repair or replace the wiring harness. |
Error code: | 42 |
Display: | Self Diagnostic Temperature |
Description: | 10-352 ERROR 42 FUSER STS (FRONT) WARM TIME FAILURE |
Causes: | 1. The ‘Open Cover’ microswitch may be stuck or faulty 2. The tab on the front cover may be damaged or broken 3. Check the connector and cables between Switch and main PBA. |
Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
Error code: | 43 |
Display: | Send Error (AUTH) |
Description: | 10-353 ERROR 43 FUSER SSR1 ON TIME FAILURE |
Causes: | 1. The ‘Open Cover’ microswitch may be stuck or faulty 2. Check the connector and cables between Switch and main PBA. |
Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
Error code: | 44 |
Display: | Send Error (DNS) |
Description: | Fuser Sub Lamp Overheat Failure, Code 44 The front thermistor has detected an overheat condition. Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault is performed. |
Causes: | • Fuser • Engine Control Board |
Remedy: | 1 1. Turn OFF power, remove the fuser assembly and allow it to cool down. 2. Measure the resistance between the Fuser connector P600-7 and P600-9. 3. Does the resistance measure between 30 K and 190 K Ohms? Go to step 2. Replace the fuser assembly. 2 1. Reinstall the fuser assembly. 2. Enter service diagnostics. 3. From the Sensor Tests run the Fuser Temperature test. 4. Is the temperature indicated approximately 165o C? Go to step 4. Go to step 3. 3 1. Turn OFF printer power. 2. Measure the resistance between J641-4 and J641-5 on the engine control board. 3. Does the resistance measure between 30 K and 190 K Ohms? Go to step 4. Repair or replace the wiring harness. 4 1. Turn printer power back ON. 2. Is there ~+3.4 VDC between J590-3 and ground? Check the AC wiring harness to the fuser. If the check is OK, replace the AC drive assembly. Replace the engine control board. |
Error code: | 45 |
Display: | Send Error (POP3) |
Description: | Fuser STS (Rear) Failure, Code 45 Rear Thermistor open error. The machine logic detected an open circuit in the rear thermistor. |
Causes: | • Fuser • Engine Control Board |
Remedy: | 1 1. Turn OFF power, remove the fuser assembly and allow it to cool down. 2. Measure the resistance between the Fuser connector P600-7 and P600-9. 3. Does the resistance measure between 30 K and 190 K Ohms? Go to step 2. Replace the fuser assembly. 2 1. Reinstall the fuser assembly. 2. Enter service diagnostics. 3. From the Sensor Tests run the Fuser Temperature test. 4. Is the temperature indicated approximately 165o C? Replace the engine control board. Go to step 3. 3 1. Turn printer power OFF. 2. Check for an open circuit or poor connection between J641-4 and J641-5. 3. Is the wiring harness OK? Replace the engine control board. Repair or replace the wiring harness. |
Error code: | 46 |
Display: | Send Error (SMTP) |
Description: | 10-354 ERROR 46 FUSER STS (REAR) WARM TIME FAILURE |
Causes: | 1. Check stability of 24V supply to LSU. |
Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-7 and P600-9. Does the resistance measure between 20 ohms and 100 ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-3 and P404A-4 on the Engine Control Board. Does the resistance measure between 20K ohms and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
Error code: | 47 |
Display: | Send Error (Wrong Config) |
Description: | 10-356 ERROR 47 FUSER SSR2 ON TIME FAILURE |
Causes: | There is disconnection in the paper transfer bias supply circuit. (Dirty or deformed electrodes) |
Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-7 and P600-9. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-3 and P404A-4 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
Error code: | 48 |
Display: | [Stop Pressed] |
Description: | Fan Failure, Code 48 The machine logic detected a failure of the Fuser fan, LVPS fan, or rear fan. |
Causes: | • Fuser Fan • LVPS Fan • Rear Fan |
Remedy: | 1 1. Enter service diagnostics and run the fan test. 2. Does the fuser fan rotate at a high speed? Go to step 4. Go to step 2. 2 1. Check for voltage at J222-4. 2. Does the voltage measure +24 VDC? Go to step 3. Check the wiring to the fuser fan, if the wiring is OK, replace the engine control board. 3 Does the front panel indicate the fans are ON? Replace the fan. Check the wiring to the fuser fan, if the wiring is OK, replace the engine control board. 4 Does the rear fan revolve at high speed? Go to step 7. Go to step 5. 5 1. Check for voltage at J552-1. 2. Does the voltage measure +24 VDC? Go to step 6. Check the wiring to the rear fan, if the wiring is OK replace the interface board. If the problem continues, replace the engine control board. 6 Does the front panel indicate the fans are ON? Replace the rear fan. Check the wiring tot he rear fan, if the wiring is OK, replace the engine control board. 7 Does the LVPS fan revolve at high speed? The fans are operating correctly. If the problem persists, replace the engine control board. Go to step 8. 8 1. Check for voltage at J214-4. 2. Is +24 VDC present? Go to step 9. Check the wiring to the LVPS fan, if the wiring is OK, replace the engine control board. 9 Does the front panel indicate the fans are ON? Replace the LVPS assembly. Check the wiring to the LVPS fan, if the wiring is OK, replace the engine control board. |
Error code: | 49 |
Display: | Tray 1 Paper Empty |
Description: | There is no paper in the tray 1. |
Causes: | Pressure roller thermistor, pressure roller lamp connector, MCU |
Remedy: | Load paper in the tray 1. |
Error code: | 50 |
Display: | Tray 2 Paper Empty |
Description: | Fuser Fan Failure The Fuser Fan rotation signal indicates to the Engine Control Board that the fan is no longer operational. |
Causes: | • Fuser Fan, PL5.3.31 • FAN/PHD/MOT Harness, PL10.1.9 • Engine Control Board, PL9.1.16 |
Remedy: | 1 Check the Fuser Fan for damage. Remove the Front Cover. Is the fan damaged? Replace the Fuser Fan. Go to Step 2. 2 Check the Fuser Fan connection. Is P/J482 connected to the harness? Go to Step 2. Reconnect the Fan. 3 Check orientation of the Fuser Fan. Does the Fan’s label face into the chute? Go to Step 3. Correct the installation. 4 Test the Fuser Fan. Run the Service Diagnostics Fuser Fan test. Does the Fan operate. Go to Step 6. Go to Step 5. 5 Check all pins on the FAN/PHD/MOT Harness PL10.1.9 for continuity. 1. Disconnect P/J48 and P/J482. 2. Check continuity between J48 <=> P483. Go to Step 5. Replace the FAN/PHD/MOT Harness. 6 Check the fan rotation signal. Print one sheet. Is there +3.3 V across P/J48-A12 <=> P/J48-A13? Replace the Engine Control Board. Replace the Fuser Fan. |
Название
Samsung Тонер-картридж черный
Samsung Блок формирования изображения
Samsung Двойная упаковка тонер-картриджа SCX-6320D8