Samsung SCX-8123ND
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A3
Число страниц в месяц
100000
Цветность печати
черно-белая
Общие характеристики |
|
|---|---|
Размещение |
напольный |
Число страниц в месяц |
100 000 |
Макс. формат |
A3 |
Область применения |
большой офис |
Тип |
лазерный/светодиодный |
Цветность печати |
|
Технология печати |
лазерная |
Тип устройства |
МФУ |
Сканер |
|
Факс |
|
Копир |
|
Печать фотографий |
|
Телефон |
|
Принтер |
|
Двусторонняя печать |
|
Прямая печать |
|
Печать без полей |
|
Пигментные чернила |
|
Макс, разрешение для ч/б печати |
|
| По Y | 600 |
| По X | 2 400 |
Время выхода первого отпечатка |
|
| Ч/б | 9 |
Копир |
|
Время выхода первой копии |
6,7 |
Макс, количество копий за цикл |
9 999 |
Шаг масштабирования |
0,01 |
Значение масштаба |
|
| Минимальное | 0,25 |
| Максимальное | 4 |
Макс, разрешение (ч/б) |
|
| По Y | 600 |
| По X | 600 |
Скорость ч/б копирования |
|
| A3 | 12 |
| A4 | 23 |
Сканер |
|
Устройство автоподачи оригиналов |
двустороннее |
Макс. формат оригинала |
A3 |
Тип датчика сканера |
ПЗС (CCD) |
Тип сканера |
планшетный |
Отправка изображения по e-mail |
|
Стандарт TWAIN |
|
Слайд-адаптер |
|
Емкость устройства автоподачи оригиналов |
100 |
Макс, размер сканирования |
|
| По Y | 432 |
| По X | 297 |
Разрешение сканера |
|
| По Х | 600 |
| По Y (улучшенное) | 4 800 |
| По Х (улучшенное) | 4 800 |
Расходные материалы |
|
Ресурс фотобарабана |
100 000 |
Количество картриджей |
1 |
Ресурс ч/б картриджа/тонера |
25 000 |
Печать на: |
|
| Конвертах |
|
| Глянцевой бумаге |
|
| Этикетках |
|
| Пленках |
|
| Карточках |
|
| Матовой бумаге |
|
| Рулоне |
|
| CD/DVD |
|
| Фотобумаге |
|
Плотность бумаги |
|
| Максимальная | 216 |
| Минимальная | 60 |
Факс |
|
PC Fax |
|
Цветной |
|
Телефон |
|
Спикерфон |
|
Caller ID |
|
Стандарт DECT |
|
Автоответчик |
|
АОН |
|
Проводная трубка |
|
Беспроводная трубка |
|
Языки управления |
|
| PostScript 3 |
|
|
|
|
| PCL 6 |
|
| PCL 5c |
|
| PostScript |
|
| PostScript 2 |
|
| PPDS |
|
Лотки |
|
Емкость лотка ручной подачи |
100 |
Подача бумаги |
|
| Стандартная | 1 140 |
| Максимальная | 2 180 |
Вывод бумаги |
|
| Максимальный | 500 |
| Стандартный | 500 |
Финишер |
|
Степлер |
|
Брошюровщик |
|
Сортер |
|
Интерфейсы |
|
Версия USB |
2,0 |
Устройство для чтения карт памяти |
|
Wi-Fi |
|
RS-232 |
|
FireWire (IEEE 1394) |
|
Bluetooth |
|
Инфракрасный порт |
|
LPT |
|
Ethernet (RJ-45) |
|
USB |
|
Веб-интерфейс |
|
Память/Процессор |
|
Процессор |
Chorus4N Dual Core |
Объем памяти |
768 |
Частота процессора |
1 000 |
Дополнительная информация |
|
Диагональ дисплея |
7 |
Экран |
|
Работа от аккумулятора |
|
Поддержка ОС |
|
| Windows |
|
| Mac OS |
|
| Linux |
|
| DOS |
|
Потребляемая мощность |
|
| В режиме ожидания | 100 |
| При работе | 800 |
Уровень шума |
|
| При работе | 53 |
| В режиме ожидания | 30 |
Габариты |
|
Высота |
737 |
Ширина |
560 |
Вес |
53,5 |
Глубина |
600 |
Модули
PLATEN FR HR-UPPER
COVER
FRAME MAIN PICKUP 1 2
CASSETTE-2ND
COVER-SIDE EXIT
Fuser
Exit
DADF FRAME-MAIN
MP-BRACKET PICK UP
DADF OPEN-COVER
COVER-SIDE MONO
CASSETTE-1ST
COVER-SIDE DUPLEX
DADF
MAIN
DADF-SUB
FRAME-MAIN
MP
OPE Mono
Frame main pickup
FRAME MAIN PICKUP UPPER
PLATEN FR HR
DADF PLATEN Mono
DADF STACKER
DADF-MOTOR
FRAME-MAIN ENGINE
FRAME-MAIN REGI
DRIVE FUSER-EXIT
PLATEN FR HR-LOWER
MP GUIDE-MAIN
MP-TRAY
Детали DADF
| Деталь: | FRAME-COVER, PC, 0.125, 24,9, TRANSPARENT |
| Парткод: | JC61-04693A |
| Деталь: | GROUND-HINGE, CLX-9201, ABS, 59,61, G61881 |
| Парткод: | JC63-03314A |
| Деталь: | HOLDER-HINGE-R, DACS-2N, 6.2*2.8, Nylon66 |
| Парткод: | JC61-04574A |
| Деталь: | HOLDER-HINGE-L, CLX-9201 |
| Парткод: | JC61-04573A |
| Деталь: | PBA-SCAN JOINT, CLX-9201, SCANNER |
| Парткод: | JC92-02447A |
| Деталь: | PLATEN FR HR-OPEN SENSOR,CLX-9201, SUS, 0.2, 70, 50, GROUND |
| Парткод: | JC97-04003A |
| Деталь: | COVER-FRONT MONO, SCX-8128NA, SECC, T0.6, W536, L649 |
| Парткод: | JC95-01492A |
| Деталь: | COVER-FRONT LOWER, CLX-9201, WORLD, SEC |
| Парткод: | JC63-03405A |
| Деталь: | COVER-INNER MONO, CLX-9201, HIPS, T2, W103.5, L48.8, G32690, FG-1790 |
| Парткод: | JC95-01494A |
| Деталь: | COVER-FRONT TOP DECO, SCX-8128NA, HIPS, T2, W95.6, L444, G32690, FG-1790 |
| Парткод: | JC63-03404A |
| Деталь: | COVER-FRONT TOP, SCX-8128NA, HIPS, T2, W44, L323.5, G32690,FG-1790 |
| Парткод: | JC63-03403A |
| Деталь: | COVER-LEFT MONO, CLX-9201, HIPS,2.5, W550, L96.7, G32690, FG-1790 |
| Парткод: | JC95-01493A |
| Деталь: | COVER-SCAN LEFT, SCX-8128NA, WORLD, SEC |
| Парткод: | JC63-03396A |
| Деталь: | COVER-SCAN FRONT, CLX-9201, PC,0.38, W13,L13, G32690 |
| Парткод: | JC95-01502A |
| Деталь: | COVER-LEFT UPPER, CLX-9201, WORLD, SEC |
| Парткод: | JC63-03406A |
| Деталь: | COVER-EXIT REAR, CLX-9201, WORLD, SEC |
| Парткод: | JC63-03389A |
| Деталь: | COVER-EXIT, SCX-8128NA, WORLD, SEC |
| Парткод: | JC95-01499A |
| Деталь: | COVER-SCAN RIGHT, CLX-9201, HIPS, T2.5, W165.6, L283.4, G32690, FG-1790 |
| Парткод: | JC95-01503A |
| Деталь: | COVER-EXIT DUMMY, CLX-9201, PC,0.38, W22,L13.4, G32690 |
| Парткод: | JC63-03391A |
| Деталь: | COVER-RIGHT TOP, CLX-9201, HIPS, T2,W47.5, L223.9, G32690, FG-1790 |
| Парткод: | JC63-03402A |
| Деталь: | COVER-RIGHT INNER MONO, CLX-9201, HIPS, T2,W360.4, L69, G32690, FG-1790 |
| Парткод: | JC63-03291A |
| Деталь: | COVER-RIGHT HANDLE, SCX-8128NA, WORLD, SEC |
| Парткод: | JC63-03398A |
| Деталь: | COVER-RIGHT LOWER, CLX-9201, HIPS, T2, W85, L446.3, G32690,FG-1790 |
| Парткод: | JC95-01501A |
| Деталь: | COVER-RIGHT MONO, CLX-9201, HIPS, T2,W383.5, L198.2, G72797, HR-1360T |
| Парткод: | JC63-03292A |
| Деталь: | BRACKET-COVER REAR MONO, SCX-8123NA, PC,0.125, W35,L7, G72797 |
| Парткод: | JC61-04568A |
| Деталь: | COVER-SCAN REAR, CLX-9201, HIPS, T2, W365.7, L100, G72797, HR-1360T |
| Парткод: | JC63-03332A |
| Деталь: | COVER-CONNECTOR DADF, SCX8133NA, PC,0.125, W35, L7, G72797 |
| Парткод: | JC63-03333A |
| Деталь: | FRAME MAIN-PICKUP 1ST, CLX-9201, SEC |
| Парткод: | JC93-00511A |
| Деталь: | FRAME MAIN-PICKUP 2ND, CLX-9201, SEC |
| Парткод: | JC93-00512A |
| Деталь: | SHEET-GUIDE PICKUP, CLX-9201 |
| Парткод: | JC63-03342A |
| Деталь: | GUIDE-PICKUP 1ST, CLX-9210, PET,0.188, 323,25 |
| Парткод: | JC61-04721A |
| Деталь: | GUIDE-HARNESS PICKUP, CLX-9201, SEC |
| Парткод: | JC61-04723A |
| Деталь: | FRAME MAIN-PICKUP,CLX-9201, ABS, 327,43, HF-0660I, BLACK(K21441), PAPER |
| Парткод: | JC93-00510A |
| Деталь: | GUIDE-PICKUP BOTTOM, CLX-9201, SEC |
| Парткод: | JC61-04735A |
| Деталь: | GUIDE-PICKUP 2ND, CLX-9201, ABS,54,20, HF-0660I, BLACK(K21441), GUIDE |
| Парткод: | JC61-04717A |
| Деталь: | CASSETTE-2ND, CLX-9201,SEC |
| Парткод: | JC90-01141A |
| Деталь: | FRAME-CASSETTE 2ND, PWH,+,B,M3,L10,NI PLT,SWRCH18A |
| Парткод: | JC61-04713A |
| Деталь: | LOCKER-CASSETTE 2ND, PWH,+,2, M3, L8, ZPC(BLK), SWRCH18A |
| Парткод: | JC64-00716A |
| Деталь: | SPRING-ES, CLX-9201, ABS, 3, 21.5, 280, HF-0660i, BLACK, LINK |
| Парткод: | 6107-001761 |
| Деталь: | HOLDER-LOCKER, CLX-9201, Flocking, BLK,0.5, 44, 13 |
| Парткод: | JC61-04886A |
| Деталь: | SCREW-TAPTYPE, CLX-9201, SEC |
| Парткод: | 6003-000196 |
| Деталь: | CASSETTE-COVER, CLX-9350, POM, OD10, L16.5, GUIDE |
| Парткод: | JC90-01129A |
| Деталь: | CASSETTE-GUIDE FRONT, CLX-9201, HIPS, 62.2, 30, ICE-GREEN,PAPER |
| Парткод: | JC90-01130A |
| Деталь: | CASSETTE-GUIDE REAR, CLX-9201, SEC |
| Парткод: | JC90-01131A |
| Деталь: | GEAR-M_PINION 24, CLX-9201, POM, BLACK, 120. 5X13X43.5 |
| Парткод: | JC66-01020A |
| Деталь: | SCREW-TAPPING, PWH,+,-,B, M3, L6, ZPC(WHT), SWRCH18A,- |
| Парткод: | 6002-000440 |
| Деталь: | CASSETTE-BRACKET LIFT, CLP-500, Fe+Cu+Zn-Slearate |
| Парткод: | JC90-01128A |
| Деталь: | SHAFT-LIFTING CST, CLX-9201, SECC, 1T, 360.2, 360.1 |
| Парткод: | JC66-03285A |
| Деталь: | BUSH-D6/L4, CLX-9350, 45, 140 |
| Парткод: | JC61-00699A |
| Деталь: | GEAR-LIFTING CST, SCX-6345N/XRX, POM,1,24, NTR, 26 |
| Парткод: | JC66-03278A |
| Деталь: | RING-E, SWP B,PI0.55, L27.9, ID4.35, OD4.55 |
| Парткод: | 6044-000125 |
| Деталь: | PLATE-LEVER, CLX-9201, SEC |
| Парткод: | JC61-03206A |
| Деталь: | SCREW-HEX, CLX-9201, EPE, 60, 360, 60, NATURE, SEC |
| Парткод: | 6009-001664 |
| Деталь: | GUIDE-LEFT, CLX-9201, POM, 1,60 |
| Парткод: | JC61-04718A |
| Деталь: | INDICATOR-SIZE REAR, CLX-9201, SEC |
| Парткод: | JC64-00704A |
| Деталь: | LEVER-LINK SIZE 2ND, HWH,+, M3, L8, ZPC(WHT), SWRCH18A, C TYPE |
| Парткод: | JC66-03201A |
| Деталь: | SCREW-TAPTYPE, ID4,OD9,T0.6, STSC |
| Парткод: | 6003-000264 |
| Деталь: | INDICATOR-SIZE SIDE, CLX-9201, HIPS, G72797, 464, 516, HR-1360T |
| Парткод: | JC64-00703A |
| Деталь: | PLATE-KNOCK UP, CLX-9350, SECC, 1.6T, 73,60 |
| Парткод: | JC61-04767A |
| Деталь: | SEAL-PAD CST, CLX-9201, ABS, G72797, 138X46X49, HF-0660i |
| Парткод: | JC62-00946A |
| Деталь: | ROLLER-IDLE CST, CLX-9201, SUM22, 229,6 |
| Парткод: | JC61-03331A |
| Деталь: | COVER-SIDE EXIT, CLX-9201 |
| Парткод: | JC95-01509A |
| Деталь: | GUIDE-SIDE EXIT, ID3, OD7, T0.6, PASS, STSC |
| Парткод: | JC61-04791A |
| Деталь: | PHOTO-INTERRUPTER, CLX-9201 |
| Парткод: | 0604-001393 |
| Деталь: | ACTUATOR-FUSER OUT, CLX-9201, MPPO, 340. 9,47.1,25.6, N300X, BLACK, PART |
| Парткод: | JC66-03307A |
| Деталь: | SPRING-TS, CLX-9201, MPPO, 39. 9,24.1, N300X, BLACK |
| Парткод: | 6107-001737 |
| Деталь: | SPRING-TS, TR, 75mW, BGA, TR |
| Парткод: | 6107-003055 |
| Деталь: | RING-E, CLX-9201, UL 10272,3p,250mm, BLK/GREY |
| Парткод: | 6044-000123 |
| Деталь: | GUIDE-GATE, SUS304, 0.4, 7.7, 8.1, 180 |
| Парткод: | JC61-04792A |
| Деталь: | HOLDER-EXIT-SENSOR, SUS304, PI0.25 ,ID3.8, OD4.3, 105 |
| Парткод: | JC61-04892A |
| Деталь: | FUSER, SCX-8128NA, SEC, WORLD, 220V |
| Парткод: | JC91-01050A |
| Деталь: | ROLLER-PRESSURE, SWP B, CD0.45, L18.8, ID5.9, OD6.8 |
| Парткод: | JC66-03256A |
| Деталь: | ROLLER-HEAT, SCX-8128ND, PET+GF, 1.6, 75.5, 100.9 |
| Парткод: | JC66-03257A |
| Деталь: | BEARING-BALL, SCX-8128NA, STAINLESS-STS304, T0.8, L304 |
| Парткод: | 6601-001479 |
| Цена: | 1 400 ₽ |
| Деталь: | BEARING-BALL, SCX-8128NA, SEC, EXP |
| Парткод: | 6601-002415 |
| Деталь: | GEAR-DRIVE, HWH,+, M3,L8, ZPC(WHT), SWRCH18A, C TYPE |
| Парткод: | JC66-03131A |
| Деталь: | SPRING-ETC, SCX-8128NA, SEC,EXP |
| Парткод: | 6107-003005 |
| Деталь: | LAMP-HALOGEN, SWP B,CD1.2, L44, OD7.3 |
| Парткод: | 4713-001633 |
| Деталь: | BRACKET-BEARING, SCX-8128ND, PET+GF, 2.0, 74.9, 75.6 |
| Парткод: | JC61-04515A |
| Деталь: | BRACKET-LAMP FRONT,SCX-8128NA, SEC, WORLD, 220V |
| Парткод: | JC61-04521A |
| Деталь: | BRACKET-LAMP REAR, CLP-350N, SAMSUNG, PET,0.05, 17,65, YEL, COMMON, 220V |
| Парткод: | JC61-04522A |
| Деталь: | SPRING-CS, 230V, 1300W, 13*9.8*380.9 |
| Парткод: | 6107-003003 |
| Деталь: | GROUND-BIAS PR, ID4,OD9, T0.6, STSC |
| Парткод: | JC63-03277A |
| Деталь: | BRACKET-SPRING REAR,SCX-8123ND, STKM+SPONGE,28.5, BLACK, RUBBER 6t |
| Парткод: | JC61-04519A |
| Деталь: | BRACKET-SPRING FRONT, SCX-8128NA, EGI-SECC, T1.2, W22.7, L64 |
| Парткод: | JC61-04518A |
| Деталь: | SPRING-ES, SUS304, CD1.0 |
| Парткод: | 6107-003004 |
| Деталь: | BRACKET-INPUT PR, SCX-8128NA, Polyester Needle Felt, 1, W17.7, L300, YELLOW |
| Парткод: | JC61-04520A |
| Деталь: | SHAFT-CAM, SCX-8123ND, POM, 1.0, Z16, OD18.40 |
| Парткод: | JC66-03103A |
| Деталь: | CAM-REAR, SCX-8123ND, AL3304-H34, 30, GRAY |
| Парткод: | JC66-03178A |
| Деталь: | GEAR-IDLE_M, PWH,+,B,M3, L10, NI PLT, SWRCH18A |
| Парткод: | JC66-03132A |
| Деталь: | HOLDER-WHEEL POSITION,SCX-8128ND, POM, W17, D15.4, H6.4, WHITE |
| Парткод: | JC61-04533A |
| Деталь: | BUSH-6_D, SCX-8128NA, SEC, EXP |
| Парткод: | JC61-00423A |
| Деталь: | BUSH-HR, SCX-8128NA,EGI-SECC, T1.2, W28.6, L63.78 |
| Парткод: | JC61-01958A |
| Деталь: | COVER-SIDE REAR, ML-9400W, bearing |
| Парткод: | JC63-03316A |
| Деталь: | COVER-SIDE FRONT,L-1680HHMTRLY13 ,ID8, OD16,688ZZ |
| Парткод: | JC63-03317A |
| Деталь: | FUSER-FRAME LOWER,SCX-8128NA, SUS, 0.2, W21.7, L15.1, GROUND |
| Парткод: | JC91-01051A |
| Деталь: | FUSER-BRACKET PR, 6705ZZ, ID25.0, OD32.0, L4, CWB |
| Парткод: | JC91-01052A |
| Деталь: | FUSER-OUTPUT HR, SCX-8128NA, STAINLESS-STS304, T0.5, W22.25, L43.3 |
| Парткод: | JC91-01053A |
| Деталь: | FUSER-FRAME UPPER, SCX-8128NA, SEC, EXP |
| Парткод: | JC91-01054A |
| Деталь: | FUSER-OUTPUT PR, SCX-8128ND, PC,T1.5, W17.35, BLACK |
| Парткод: | JC91-01062A |
| Деталь: | FELT-BOTTOM, SCX-8128NA, SEC, EXP |
| Парткод: | JC63-03275A |
| Деталь: | EXIT, CLX-9201 |
| Парткод: | JC90-01118A |
| Деталь: | SCREW-TAPTYPE, CLX-9350, POM,1.0, 16,18.39 |
| Парткод: | 6003-000196 |
| Деталь: | BUSH-6_D, CLX-9350, SUM24L, 187,3 |
| Парткод: | JC61-00423A |
| Деталь: | BRACKET-REAR EXIT, CLX-9201 |
| Парткод: | JC61-04690A |
| Деталь: | PHOTO-INTERRUPTER, CLX-9201, SECC, T1.0,49, 52 |
| Парткод: | 0604-001393 |
| Деталь: | BRUSH-EXIT, CLX-9350, PC, HAZE GRAY |
| Парткод: | JC67-00563A |
| Деталь: | GEAR-EXIT, CLX-9201,SUS FIBER, 347.5, 15.9 |
| Парткод: | JC66-02163A |
| Деталь: | SPRING-TS, DACS-2N, 6.2*2.8, Nylon66 |
| Парткод: | 6107-002654 |
| Деталь: | ACTUATOR-F_D FULL EXIT, CLX-9201 |
| Парткод: | JC66-02217A |
| Деталь: | LEVER-ACTURATOR F_D FULL, CLX-9201 |
| Парткод: | JC66-02218A |
| Деталь: | LEVER-ACT FULL EXIT, CLX-9210, PET, 0.188, 8.8, 18.5 |
| Парткод: | JC66-02278A |
| Деталь: | SHAFT-ACTUATOR F_D FULL EXIT, CLX-9201, UL10272,3p,175mm,BLK/GREY, AWG26,173977-3, UL 10272, BOARD TO BOARD WIRE |
| Парткод: | JC66-02423A |
| Деталь: | EXIT-GUIDE LOWER, SUS304, PI0.45, ID6.5, OD7.4, RIGHT, 115 |
| Парткод: | JC90-01133A |
| Деталь: | EXIT-GUIDE UPPER, CLX-9350, PC, Black |
| Парткод: | JC90-01132A |
| Деталь: | CABLE CLAMP, ML-9400W,NTR |
| Парткод: | 6502-001131 |
| Деталь: | DADF FRAME-MAIN, CLX-9201, SEC |
| Парткод: | JC97-03992A |
| Деталь: | MEA-HOLDER ADF RUBBER, CLX-9201, EPDM, 16, GRAY |
| Парткод: | JC97-03097A |
| Деталь: | PAD-GUIDE_PICKUP, SCX-1110F, STS303, L10.0, D2.0 |
| Парткод: | JC69-02810A |
| Цена: | 290 ₽ |
| Деталь: | GUIDE-PICK_UP, M4,ID4.3, OD9, T0.8, ZPC(YEL), SCP |
| Парткод: | JC61-04583A |
| Деталь: | BRACKET-EXIT, SCX-5312F, SUS304WPB, PI0.65, 6.4mm, 7.7mm |
| Парткод: | JC61-04908A |
| Деталь: | BRUSH-ANTISTATIC, SUS304, 0.26,4.05, 2.4,4.3,9.2, RIGHT HAND, 6.6, 6.6,115 |
| Парткод: | JC67-00562A |
| Деталь: | ROLLER-EXIT, TR, 75mW, BGA, TR |
| Парткод: | JC66-03095A |
| Деталь: | ROLLER-REGI, POLYMIDE, ID8.1, OD12, T0.2,BLK |
| Парткод: | JC66-03094A |
| Деталь: | PHOTO-INTERRUPTER, CLX-9201, POM, 12.0, BLACK |
| Парткод: | 0604-001393 |
| Деталь: | CLUTCH-ELECTRIC, CLX-9201, PU,1.0, 10,35 |
| Парткод: | JC47-00033A |
| Цена: | 1 200 ₽ |
| Деталь: | GEAR-EXIT, ML-3200ND, DC24V,125mA, Z24, M1, 2.5KGF, SLIM TYPE |
| Парткод: | JC66-03261A |
| Деталь: | ROLLER-TENSION IDLE, CLX-9201, UL10272, 3P, 200mm, GRAY/BLK, AWG26 |
| Парткод: | JC66-02296A |
| Деталь: | BELT-TIMING GEAR, CLX-9201, SUS,0.2,143. 29, GROUND |
| Парткод: | 6602-003186 |
| Деталь: | BELT-TIMING GEAR, CLX-9201, PC,126.2 |
| Парткод: | 6602-003183 |
| Деталь: | GEAR-REDUCTION_KNOB, POLYSLIDER,ID4, OD7, T0.5, Black, side-Cutting |
| Парткод: | JC66-03267A |
| Деталь: | GEAR-IDLE_CLUTCH, CLX-9201, ABS, 2,344 |
| Парткод: | JC66-03264A |
| Деталь: | ACTUATOR-EXIT, CLX-9201, POM,0.8,20, BLACK, 17.6, JGMA3 |
| Парткод: | JC66-03184A |
| Деталь: | ROLLER-EXIT_IDLE, CLX-9201, POM,37.5, BLACK |
| Парткод: | JC66-03177A |
| Деталь: | HOLDER-EXIT IDLE_R, CLX-9201, PET, 0.125, 10,35 |
| Парткод: | JC61-04833A |
| Деталь: | ROLLER-FEED, CLX-9201, POM,6,19.864 |
| Парткод: | JC66-03093A |
| Деталь: | SPRING ETC-WHITE BAR, PWH,+,B, M3, L10,NI PLT, SWRCH18A |
| Парткод: | JC61-00548A |
| Деталь: | GUIDE-WHITE_BAR, 40S2M258, RUBBER, W4.0, L258, BLACK |
| Парткод: | JC61-04584A |
| Деталь: | SOLENOID-MP, CLX-9201, SEC |
| Парткод: | JC33-00029B |
| Деталь: | GUIDE-UPPER PU MP, CLX-9350, PORON LE-20, ID10, BLACK, PORON LE-20 |
| Парткод: | JC61-04876A |
| Деталь: | SPRING-ES, CLX-9201, POM, 9.8,34, M90-44, WHITE |
| Парткод: | 6107-003031 |
| Деталь: | SPRING-ES, CLX-9201, POM, 28.9,32.3, LZ750, WHITE,LINK |
| Парткод: | 6107-003026 |
| Деталь: | LEVER-SOLENOID, CLX-9350, Poron, BLK,1.2,6,4 |
| Парткод: | JC66-03218A |
| Деталь: | MP-BRACKET UPPER, CLX-9350, POM, T8.5, OD17, GUIDE |
| Парткод: | JC90-01127A |
| Деталь: | SHAFT-PICK UP MP, SWP B,0.65,25.1,4.4,5.7 |
| Парткод: | JC66-03222A |
| Деталь: | LOCKER-STOPPER,CLX-9201,POM,9,24.2, M90-44, WHITE, LINK |
| Парткод: | JC64-00705A |
| Деталь: | GEAR-M_IDLE PU, SWP B,0.5,16.9,4,5 |
| Парткод: | JC66-00940A |
| Деталь: | SHAFT-FORWARD MP, CLX-9350, DC24V |
| Парткод: | JC66-03303A |
| Деталь: | GEAR-M PU, SPY272, DAMPING GREASE |
| Парткод: | JC66-03213A |
| Деталь: | STOPPER-PAPER, CLX-9201, POM, BLACK, 29.1,4 |
| Парткод: | JC61-04766A |
| Деталь: | JOINT-PU, ID4, OD9, T0.6, STSC |
| Парткод: | JC66-03221A |
| Деталь: | ROLLER-IDLE FORWARD, ID3, OD7, T0.6, PASS, STSC |
| Парткод: | JC61-03332A |
| Деталь: | MP-ONE WAY, SCX-6320F, BRONZE POWDER(KAB-23) |
| Парткод: | JC90-00918A |
| Деталь: | LEVER-HOOK, CLX-9201, POM,0.7,21,16.1 |
| Парткод: | JC66-03219A |
| Деталь: | CLUTCH-P_ONE WAY, CLX-9201, POM, 1,1. 2,14, NATURAL |
| Парткод: | JC66-00977A |
| Деталь: | HOLDER-M_IDLE ONE WAY, PH,+,M3, L4,NI PLT, SWRCH18A, FP,- |
| Парткод: | JC61-01288A |
| Деталь: | DADF OPEN-COVER, CLX-9201, SEC |
| Парткод: | JC97-03990A |
| Деталь: | COVER-OPEN, CLX-9201, HIPS, 322, Naoto Brown Black |
| Парткод: | JC63-03273A |
| Деталь: | HANDLE-COVER_OPEN, CLX-9201, POM, 33.7, WHITE |
| Парткод: | JC64-00682A |
| Деталь: | SPRING-ES, CLX-6240FX, PORON, 1.0,7. 8,4, BLACK |
| Парткод: | 6107-003033 |
| Деталь: | SPRING-CS, CLX-9201, SEC |
| Парткод: | 6107-003022 |
| Деталь: | SPRING-TS, CLX-9201, SEC |
| Парткод: | 6107-001737 |
| Деталь: | SPRING ETC-PICKUP, CLX-9201, POM, BLACK |
| Парткод: | JC61-00482A |
| Деталь: | DADF GUIDE-PIKCUP, CLX-9350, POM, 18 |
| Парткод: | JC97-04009A |
| Цена: | 2 500 ₽ |
| Деталь: | ACTUATOR-REGI, CLX-9201, SUM22,169,4 |
| Парткод: | JC66-03148A |
| Деталь: | ACTUATOR-DETECT, SWP, 1.2,22,10.2, 11.4,9, FREE |
| Парткод: | JC66-03147A |
| Деталь: | ROLLER-IDLE TAKE AWAY,CLX-9201, HIPS, 2, 303.7, Naoto BrownBlack, 35.7 |
| Парткод: | JC66-02384A |
| Деталь: | COVER-OPEN_INNER, SUS304, PI0.25 ,ID3.8, OD4.3, 105 |
| Парткод: | JC63-03274A |
| Деталь: | STOPPER-PAPER, CLX-9201, PC, 159.5 |
| Парткод: | JC61-04647A |
| Деталь: | MP-TRAY, W,OD2,L8,PASS,STS304 |
| Парткод: | JC90-01117A |
| Деталь: | COVER-FRONT MP,CLX-9201,POM,BLACK,70.5,F20-02,U-Ty |
| Парткод: | JC63-03356A |
| Деталь: | COVER-SIDE MONO,PWH,+,-,B,M3,L6,ZPC(WHT),SWRCH18 |
| Парткод: | JC63-03360A |
| Деталь: | COVER-SIDE DUPLEX, CLX-9201,SUM22,391,6 |
| Парткод: | JC95-01522A |
| Деталь: | GUIDE-DUPLEX UPPER, ID4,OD9,T0.6,STSC |
| Парткод: | JC61-04795A |
| Деталь: | COVER-SIDE EXIT,CLX-9201,PC,133.8,BLACK |
| Парткод: | JC95-01509A |
| Деталь: | HANDLE-SIDE, SCX-8128NA |
| Парткод: | JC64-00712A |
| Деталь: | SHAFT-HANDLE, Type5,24,170mA,4.0mmH20,0.433m3/mi |
| Парткод: | JC66-03301A |
| Деталь: | ROLLER-DUPLEX, SUS304,PI0.6,L16.6,ID4.7,OD5.9 |
| Парткод: | JC66-03179A |
| Деталь: | CASSETTE-1ST, CLX-9201, SEC |
| Парткод: | JC90-01140A |
| Деталь: | FRAME-CASSETTE 1ST, CLX-9201, POM,1,60 |
| Парткод: | JC61-04712A |
| Деталь: | LOCKER-CASSETTE 1ST, CLX-9350, POM, OD10, L16.5, GUIDE |
| Парткод: | JC64-00715A |
| Деталь: | SPRING-ES, HWH,+,M3, L8, ZPC(WHT), SWRCH18A ,C TYPE |
| Парткод: | 6107-001761 |
| Деталь: | HOLDER-LOCKER, CLX-9201, Flocking, BLK, 0.5, 44,13 |
| Парткод: | JC61-04886A |
| Деталь: | SCREW-TAPTYPE, CLX-9201, SEC |
| Парткод: | 6003-000196 |
| Деталь: | CASSETTE-COVER, CLX-9201, POM, BLACK, 73.5X13X43.5 |
| Парткод: | JC90-01129A |
| Деталь: | CASSETTE-GUIDE FRONT, CLX-9201, ABS, 3,21.5, 232, HF-0660i, BLACK, LINK |
| Парткод: | JC90-01130A |
| Деталь: | CASSETTE-GUIDE REAR, CLX-9201, SEC |
| Парткод: | JC90-01131A |
| Деталь: | GEAR-M_PINION 24, PWH,+,2, M3, L8, ZPC(BLK), SWRCH18A |
| Парткод: | JC66-01020A |
| Деталь: | SCREW-TAPPING, PWH,+,-,B, M3, L6, ZPC(WHT), SWRCH18A,- |
| Парткод: | 6002-000440 |
| Деталь: | CASSETTE-BRACKET LIFT, CLP-500, Fe+Cu+Zn-Slearate |
| Парткод: | JC90-01128A |
| Деталь: | SHAFT-LIFTING CST, CLX-9201, SECC, 1T, 360.2, 360.1 |
| Парткод: | JC66-03285A |
| Деталь: | BUSH-D6/L4, CLX-9201, SEC |
| Парткод: | JC61-00699A |
| Деталь: | GEAR-LIFTING CST, SCX-6345N/XRX, POM, 1,24, NTR, 26 |
| Парткод: | JC66-03278A |
| Деталь: | RING-E, SWP B,PI0.55, L27.9, ID4.35, OD4.55 |
| Парткод: | 6044-000125 |
| Деталь: | PLATE-LEVER, CLX-9201, SEC |
| Парткод: | JC61-03206A |
| Деталь: | SCREW-HEX, CLX-9201, EPE, 60, 360,60, NATURE, SEC |
| Парткод: | 6009-001664 |
| Деталь: | GUIDE-LEFT, CLX-9201, HIPS, G72797, 2.5, 419, 516, HR-1360T |
| Парткод: | JC61-04718A |
| Деталь: | INDICATOR-SIZE REAR, CLX-9201, SEC |
| Парткод: | JC64-00704A |
| Деталь: | LEVER-LINK SIZE 1ST,CLX-9201,HIPS, 62.2,30, ICE-GREEN, PAPER |
| Парткод: | JC66-03202A |
| Деталь: | SCREW-TAPTYPE, ID4, OD9, T0.6, STSC |
| Парткод: | 6003-000264 |
| Деталь: | INDICATOR-SIZE SIDE, PWH,+,B, M3, L10, NI PLT, SWRCH18A |
| Парткод: | JC64-00703A |
| Деталь: | PLATE-KNOCK UP, CLX-9350, SECC,1.6T, 73,60 |
| Парткод: | JC61-04767A |
| Деталь: | SEAL-PAD CST, CLX-9201, ABS, G72797, 138X46X49, HF-0660i |
| Парткод: | JC62-00946A |
| Деталь: | ROLLER-IDLE CST, CLX-9201, SUM22, 229,6 |
| Парткод: | JC61-03331A |
| Деталь: | COVER-SIDE DUPLEX, SCX-8128NA |
| Парткод: | JC95-01522A |
| Деталь: | GUIDE-TR UPPER, SWP B,0.8, 21.1,4.5, 6.1 |
| Парткод: | JC61-04879A |
| Деталь: | HARNESS-SIDE DUPLEX_TEMP, SCX-8128NA |
| Парткод: | JC39-01654A |
| Деталь: | COVER-SIDE TR LOWER, CLX-9350, PC HN-1064i, Black |
| Парткод: | JC95-01551A |
| Деталь: | SPRING-CS, CLX-9350, POM SW-01, NATURAL |
| Парткод: | 6107-003021 |
| Деталь: | ACTUATOR-DUPLEX 2, CLX-9350, SUM24L, 137.0, 3 |
| Парткод: | JC66-02180A |
| Деталь: | PHOTO-INTERRUPTER, SCX-8213ND, UL10272, 5p, 325mm, BLK,GREY |
| Парткод: | 0604-001393 |
| Деталь: | HOLDER-DUP SNR, SUS304, PI0.25, ID3.8, OD4.3, 105 |
| Парткод: | JC61-04808A |
| Деталь: | SPRING-TS, SCX-8040, SUS,0.2T, 18.2,13.4 |
| Парткод: | 6107-001737 |
| Деталь: | GUIDE-FEED MONO, SCX-8128NA |
| Парткод: | JC61-04877A |
| Деталь: | LINK-TR REAR, SCX-8128NA, ABS,29.7, 46.3, BLACK, HF-0660i |
| Парткод: | JC66-03277A |
| Деталь: | PLATE-GROUND_TR_B, SCX-8128NA, POM, 42.1, T2.0, BLACK |
| Парткод: | JC61-04651A |
| Деталь: | PLATE-GROUND_SAW_C, SCX-8128NA, SUS 304, 0.8 |
| Парткод: | JC61-03581A |
| Деталь: | ROLLER-IDLE, SCX-8128NA, ABS+PC, 390.2, 135.3, NH-1000T, BLACK, GUIDE |
| Парткод: | JC66-02289B |
| Деталь: | SHAFT-ROLLER IDLE L, SCX-8128NA, ABS+PC, 320.5, 36.5, NH-1000T, BLACK, GUIDE |
| Парткод: | JC66-02354A |
| Деталь: | SPRING-CS, SCX-8128NA, STAINLESS-STS304, T0.2, 21.3,11.9, GROUND |
| Парткод: | 6107-001731 |
| Деталь: | DADF PLATEN, CLX-9201, SEC |
| Парткод: | JC97-03997A |
| Деталь: | DADF-SUB, CLX-9201, SEC |
| Парткод: | JC97-03991A |
| Деталь: | DADF-HINGE L, BH,+,B, M4,L16, NI PLT, SWRCH18A |
| Парткод: | JC97-03995A |
| Деталь: | DADF-HINGE R, BH,+,B,M4, L10,NI PLT, SWRCH18A |
| Парткод: | JC97-03996A |
| Деталь: | COVER-SIDE_F, CLP-500, ART PAPER, W62, L13, WHITE, COMMON |
| Парткод: | JC63-03345A |
| Деталь: | COVER-DECO_R, CLX-9201, SEC |
| Парткод: | JC63-03354A |
| Деталь: | COVER-SIDE_R, CLX-9201, HIPS,2, 480, 75, Naoto Brown Black,166, HR-1360T |
| Парткод: | JC63-03346A |
| Деталь: | COVER-DECO_F, CLX-9201, SEC |
| Парткод: | JC63-03353A |
| Деталь: | EXIT, CLX-9201 |
| Парткод: | JC90-01118A |
| Деталь: | FUSER, SCX-8128NA,SEC, WORLD,220V |
| Парткод: | JC91-01050A |
| Деталь: | FRAME-MAIN ENGINE, SCX-8128NA, SEC, WORLD |
| Парткод: | JC93-00439A |
| Деталь: | COVER-SIDE MONO, CLX-9201 |
| Парткод: | JC95-01508A |
| Деталь: | CARTRIDGE-WTB, SCX-8128NA, SEC, WORLD |
| Парткод: | JC96-06214A |
| Деталь: | COVER, SCX-8128NA, WORLD, SEC |
| Парткод: | JC95-01495A |
| Деталь: | OPE, CLX-9201, WORLD, SEC |
| Парткод: | JC97-04006B |
| Деталь: | PLATEN FR HR, CLX-9201, SCANNER |
| Парткод: | JC97-04020A |
| Деталь: | DADF, CLX-9201, SEC |
| Парткод: | JC97-03989A |
| Деталь: | LSU, SCX-8123ND, SEC, single, A3, |
| Парткод: | JC97-04017A |
| Цена: | 14 700 ₽ |
| Деталь: | LSU, SCX-8123ND, SEC, single, A3,600, Single Beam, 780nm single, CW, Straight |
| Парткод: | JC97-04017A |
| Цена: | 14 700 ₽ |
| Деталь: | HVPS, 24V,21.6V27.6V, MAX 8KV, MAX-8KV,600 |
| Парткод: | JC44-00182A |
| Деталь: | SMPS-V2, CLX-9201, PSPNTYPE5-V2, AC-DC, 275W, 220V-240V,50/60Hz,200*120*40, 85%,+5.1V /+24V,+5.1V, 7A / +24V, 10A,O,O,O,O |
| Парткод: | JC44-00100C |
| Деталь: | FDB-POLARIS / EVERGREEN_V2, CLX-9201, POLARIS / EVERGREEN FDB-V2, AC/AC(PC) |
| Парткод: | JC44-00211A |
| Деталь: | FAN-TYPE 5, Type5, 24,170mA,4.0mmH20, 0.433m3/mi |
| Парткод: | JC31-00160A |
| Деталь: | HOLDER-FILTER OZONE,SCX-8128NA, HIPS, 98,79, SplitBrown Black(G32690), FG-1790 |
| Парткод: | JC61-04861A |
| Деталь: | PBA-MAIN, SCX-8128,SEC, FR-4,6Layer |
| Парткод: | JC92-02452A |
| Деталь: | PBA-FAX JOINT, CLX-9201, SEC, CEM-3, 2Layer |
| Парткод: | JC92-02439A |
| Деталь: | DADF OPEN-COVER, CLX-9201, SEC |
| Парткод: | JC97-03990A |
| Деталь: | DADF FRAME-MAIN, CLX-9201, SEC |
| Парткод: | JC97-03992A |
| Деталь: | DADF-MOTOR, CLX-9201, SEC |
| Парткод: | JC97-03993A |
| Деталь: | DADF STACKER, PWH,+, B,M3, L10,NI PLT, SWRCH18A |
| Парткод: | JC97-03994A |
| Деталь: | FRAME MAIN-LEFT CST RAIL, CLX-9201, POM,1,21 |
| Парткод: | JC93-00477A |
| Деталь: | FRAME MAIN-RIGHT CST RAIL, SCX-6345N/XRX, OWC612GXRZ,0.8N.M,NTR |
| Парткод: | JC93-00478A |
| Деталь: | FRAME MAIN-SUPPORT SCAN RIGHT, ML-9400W, bearing, |
| Парткод: | JC93-00484A |
| Деталь: | GUIDE-TONER BOTTLE, CLX-9201, SEC, WORLD |
| Парткод: | JC61-04864A |
| Деталь: | GUIDE-OPC, SCX-8128NA, SEC, WORLD |
| Парткод: | JC61-04863A |
| Деталь: | PLATE-TOP EXIT MONO, CLX-9201, HIPS, 46.3, 109.5,61.4, BLACK,HR-1360T |
| Парткод: | JC61-04835A |
| Деталь: | PLATE-LSU LOWER, CLX-9201, SEC, WORLD |
| Парткод: | JC61-04834A |
| Деталь: | WIRE-GUIDE LSU, SCX-8128NA, ABS,260. 1,15.4, HF-0660i, BLACK,PATH |
| Парткод: | JC66-03274A |
| Деталь: | MP, CLX-9201, SEC |
| Парткод: | JC90-01139A |
| Деталь: | MP GUIDE-MAIN, CLX-9201 |
| Парткод: | JC90-01126A |
| Деталь: | MP-BRACKET PICK UP, CLX-9201, SECC, 0.6T, 67.4,53.1 |
| Парткод: | JC90-01125A |
| Деталь: | FRAME-MAIN PICK UP ROLLER,CLX-9201, ABS, 10, 43.5, 4.5, HF-0660I, BLACK, GUIDE |
| Парткод: | JC93-00540A |
| Цена: | 700 ₽ |
| Деталь: | GEAR-IDLE MP, SPY272, DAMPING GREASE |
| Парткод: | JC66-03215A |
| Деталь: | BUSH-D6/L4, CLX-9201, SEC |
| Парткод: | JC61-00699A |
| Деталь: | BRACKET-SOLENOID, CLX-9201, POM,1, 26, 28 |
| Парткод: | JC61-04753A |
| Деталь: | GUIDE-HARNESS R, DACS-2N,6.2*2.8, Nylon66 |
| Парткод: | JC61-04762A |
| Деталь: | MP-COVER BASE, ID4,OD9, T0.6, STSC |
| Парткод: | JC90-01124A |
| Деталь: | COVER-GUDIE BASE, CLX-9201, SEC |
| Парткод: | JC63-03357A |
| Деталь: | LEVER-EMPTY PAPER, SUS304, PI0.25, ID3.3, OD3.8 |
| Парткод: | JC66-03217A |
| Деталь: | SPRING-TS, CLX-9201, ABS, 71, 100.5, G32690, HF-0660I |
| Парткод: | 6107-001771 |
| Деталь: | OPE, CLX-9201, WORLD, SEC |
| Парткод: | JC97-04006B |
| Деталь: | COVER-FRONT DUMMY OPE, CLX-9201, WORLD, SEC |
| Парткод: | JC63-03409A |
| Деталь: | OPE-FRONT, CLX-9201, SECC,T0.8, W220, L150 |
| Парткод: | JC97-04007A |
| Деталь: | COVER-BOTTOM OPE, CLX-9201, WORLD, SEC |
| Парткод: | JC63-03408A |
| Деталь: | BRACKET-SUPPORT, PET, 0.125, 190,110 |
| Парткод: | JC61-04567A |
| Деталь: | COVER-FRONT OPE, CLX-9201, HIPS,19*14, T2, C82824 |
| Парткод: | JC63-03407A |
| Деталь: | LCD, CLX-9201, PMMA, 52*18, T2.0 |
| Парткод: | JC07-00021A |
| Деталь: | KEY-JOB STATUS, CLX-9201, HIPS,21*22, T2, C82824 |
| Парткод: | JC64-00683A |
| Деталь: | LENS-ECO, DOUBLE TAPE,6, 100 |
| Парткод: | JC67-00586A |
| Деталь: | KEY-POWER, CLX-9201, WORLD, SEC |
| Парткод: | JC64-00691A |
| Деталь: | KEY-STOP, PWH,+,B,M3, L10, NI PLT,SWRCH18A |
| Парткод: | JC64-00685A |
| Деталь: | KEY-START, CLX-9201, HIPS, 58*15, T2, C82824 |
| Парткод: | JC64-00686A |
| Деталь: | KEY-M TEL, CLX-9201, PMMA, Milky,18.6*14.1, T 2.0 |
| Парткод: | JC64-00684A |
| Деталь: | BRACKET-LCD, CLX-9201, SUS, 0.3, W190, L120, GROUND |
| Парткод: | JC61-04561A |
| Деталь: | GROUND-TOUCH, CLX-9201, HIPS, T2.5, W327, L118, C82824 |
| Парткод: | JC63-03310A |
| Деталь: | FLAT CABLE-KEY,CLX-9201/9251/9301, SEC, FR-4,6LAYER |
| Парткод: | JC39-01575A |
| Деталь: | LENS-STATUS, CLX-9201, 20P, 0.065,135mm, AWM20624, 1.0mm, WHITE |
| Парткод: | JC67-00560A |
| Деталь: | PBA-OPE, HWH,+, M3, L8, ZPC(WHT), SWRCH18A, C TYPE |
| Парткод: | JC92-02436A |
| Деталь: | PBA-OPE KEY, CLX-9201/9251/9301, SEC, FR-1, 1LAYER |
| Парткод: | JC92-02435A |
| Деталь: | FRAME MAIN-PICKUP, CLX-9201, SEC |
| Парткод: | JC93-00510A |
| Деталь: | RING-E, CLX-9201,SECC, 1.2T, 84, 42 |
| Парткод: | 6044-000125 |
| Деталь: | BUSH-D6/L4, CLX-9201, SEC |
| Парткод: | JC61-00699A |
| Деталь: | BRACKET-PICKUP REAR, CLX-9201, SEC |
| Парткод: | JC61-04731A |
| Деталь: | BRACKET-PICKUP FRONT, CLX-9201 |
| Парткод: | JC61-04730A |
| Деталь: | GEAR-PICKUP, CLX-9201, STAINLESS-STS303, 225. 3,6, STEEL |
| Парткод: | JC66-03281A |
| Деталь: | SHAFT-FORWARD, CLX-9201, SEC |
| Парткод: | JC66-03304A |
| Деталь: | FRAME MAIN-PICKUP LOWER, CLX-9201, SECC, 1.2T, 85,52 |
| Парткод: | JC93-00503A |
| Деталь: | FRAME MAIN-PICKUP UPPER, ID4, OD9, T0.6, STSC |
| Парткод: | JC93-00504A |
| Деталь: | FRAME-MAIN PICK UP ROLLER, CLP-500, Fe+Cu+Zn |
| Парткод: | JC93-00540A |
| Цена: | 700 ₽ |
| Деталь: | LEVER-INPUT CST, SUS304, 0.55, 12.1,4.3, FREE, CLOSED END |
| Парткод: | JC66-03200A |
| Деталь: | HOLDER-RETARD, CLX-9201, SEC |
| Парткод: | JC61-04732A |
| Деталь: | SHAFT-RETARD, SCX-6345N/XRX, POM, T1.5, NTR |
| Парткод: | JC66-03283A |
| Деталь: | COUPLER-TORQUELIMITER, ID4, OD9, T0.6, STSC |
| Парткод: | JC67-00455A |
| Деталь: | FRAME MAIN-PICKUP BRKT LOWER, CLX-9201, POM, 9,48, 28.7, M90-44, BLACK,GUIDE |
| Парткод: | JC93-00438A |
| Деталь: | SPRING-CS, CLX-9350, WHITE,350GF*CM |
| Парткод: | 6107-003049 |
| Деталь: | FIXER-M_E RING 4PI, CLX-9201, POM, 23, 97, 24, BLACK, M90-44 |
| Парткод: | JC61-01367A |
| Деталь: | FRAME MAIN-PICKUP UPPER, CLX-9201, SEC |
| Парткод: | JC93-00504A |
| Деталь: | FRAME MAIN-PICKUP BRKT UPPER, CLX-9201, SEC |
| Парткод: | JC93-00437A |
| Деталь: | SHAFT-PICKUP, CLX-PFP100, SUS304,0.2T, 56, 21.23 |
| Парткод: | JC66-03284A |
| Деталь: | ACTUATOR-EMPTY PICKUP,SCX-6345N/XRX, POM, T1.8,15mm,12,WHT |
| Парткод: | JC66-03199A |
| Деталь: | CLUTCH-P_ONE WAY, CLX-9201, STAINLESS-STS303,129.5,6, STEEL |
| Парткод: | JC66-00977A |
| Деталь: | GEAR-M_PU JOINT, SUS304, 0.65,17,6.45, RIGHT HAND, CLOSED END |
| Парткод: | JC66-00943A |
| Деталь: | GEAR-M_ONE WAY, CLX-9201, PET,0.125,12,25 |
| Парткод: | JC66-00941A |
| Деталь: | GEAR-M_IDLE PU, CLX-9201, POM,120,46, M90-44, BLACK,PAPER |
| Парткод: | JC66-00940A |
| Деталь: | GUIDE-PICKUP UPPER, CLX-9201, POM, 22,73,10, M90-44, BLACK, ACTUATOR-High Tem |
| Парткод: | JC61-04736A |
| Деталь: | GUIDE-SLIDE PICKUP, SCX-6345N/XRX, POM,0.7,21,WHT,16.1 |
| Парткод: | JC61-04722A |
| Деталь: | GUIDE-SUPPORT PICKUP,SCX-6345N/XRX, OWC612GXRZ,0.8N.M,NTR |
| Парткод: | JC61-04716A |
| Деталь: | BRACKET-GRN PICKUP,SCX-6345N/XRX, POM,0.7,22, WHT,16.8 |
| Парткод: | JC61-04670A |
| Деталь: | HOLDER-M_IDLE ONE WAY, DACS-2N, 6.2*2.8, Nylon66 |
| Парткод: | JC61-01288A |
| Деталь: | CABLE CLAMP, SCX-6345N/XRX, POM, 0.7,21,WHT, 16.1 |
| Парткод: | 6502-001131 |
| Деталь: | SPRING-CS, CLX-9201, ABS,15, 305,23, HF-0660i, BLACK, PAPER |
| Парткод: | 6107-003046 |
| Деталь: | PHOTO-INTERRUPTER, CLX-9201, SEC |
| Парткод: | 0604-001393 |
| Деталь: | PLATEN FR HR-UPPER, CLX-9201, SCANNER |
| Парткод: | JC97-04002A |
| Деталь: | PLATEN FR HR-LOWER, CLX-9201, SCANNER |
| Парткод: | JC97-03985A |
| Деталь: | PHOTO-INTERRUPTER, CLX-9201, ABS, 60, 60, BLACK |
| Парткод: | 0604-001453 |
| Деталь: | HOLDER-APS, 8915, T0.15, W12, L55M, CLR,- |
| Парткод: | JC61-04569A |
| Деталь: | PLATE-ALIGN COVER, 346*30, 3.2 |
| Парткод: | JC61-04638A |
| Деталь: | COVER-GLASS, 1401C, RED,-,BOND-LOCK SCREW |
| Парткод: | JC63-03296A |
| Деталь: | GLASS-SCAN, PORON,1.0, 331, 2.5, BLACK |
| Парткод: | JC01-00072A |
| Деталь: | GUIDE-PAPER V, 459.4*346, 3.2 |
| Парткод: | JC61-04814A |
| Деталь: | GLASS-SCAN ADF, HWH,+, M3, L6, ZPC(WHT), SWRCH18A, C TYPE |
| Парткод: | JC01-00073A |
| Деталь: | GUIDE-ADF-PATH, CLX-9201, PC,1,9.5, 339, PART |
| Парткод: | JC61-04811A |
| Деталь: | GUIDE-PAPER H, CLX-9201, SCANNER |
| Парткод: | JC61-04815A |
| Деталь: | SPONGE-GUIDE ADF, CLX-9201, PC,1,30, 435, PART |
| Парткод: | JC63-03315A |
| Деталь: | COVER-PLATEN, SCX-6345N/XRX, POM, OD14, L23,WHT |
| Парткод: | JC63-03348A |
| Деталь: | PHOTO-INTERRUPTER, CLX-9201, SEC |
| Парткод: | 0604-001393 |
| Деталь: | COVER-DUMMY_PLATEN, TR,75mW, BGA, TR |
| Парткод: | JC63-03347A |
| Деталь: | SHAFT-IDLE_FEED, SUS304, 0.26,4.05, 2.4,4.3,9.2, RIGHT HAND, 6.6,6.6,115 |
| Парткод: | JC66-03211A |
| Деталь: | ROLLER-M_IDLE SCF, CLX-9201, PC,145, 40, BLACK, ACTUATOR-High Tem |
| Парткод: | JC66-01022A |
| Цена: | 260 ₽ |
| Деталь: | ACTUATOR-SCAN, CLX-9201, SUS,0.2,59, GROUND |
| Парткод: | JC66-03210A |
| Деталь: | SPRING-ES, CLX-9201, SUM22, 172,4 |
| Парткод: | 6107-002241 |
| Деталь: | GROUND-HINGE_RIGHT, SUS,PI0.5, L19.7, OD5.6 |
| Парткод: | JC63-03351A |
| Деталь: | GROUND-HINGE_FRAME, CLX-9201, SUS, 0.2, 80, GROUND |
| Парткод: | JC63-03349A |
| Деталь: | FOOT-ML80, CLX-9201, HIPS,2,550,480, Naoto Brown Black, 1080, HR-1360T |
| Парткод: | JC61-40001A |
| Деталь: | DADF STACKER, CLX-9201, SEC |
| Парткод: | JC97-03994A |
| Деталь: | GUIDE-DOC_F, CLX-9201, ABS, 33.08,158.53, HF-0660I, GUIDE |
| Парткод: | JC61-04748A |
| Деталь: | GUIDE-STACKER_UPPER, CF4500, POM, NTR+WHT(DELRIN500), HB |
| Парткод: | JC61-04746A |
| Деталь: | GUIDE-DOC_R, CLX-9201, ABS, 37,224.09, HF-0660i, GUIDE |
| Парткод: | JC61-04749A |
| Деталь: | ACTUATOR-PAPER_LENGTH, CLX-9350, PC, 0.254, 29,22 |
| Парткод: | JC66-03209A |
| Деталь: | PHOTO-INTERRUPTER, CLX-9201, SEC |
| Парткод: | 0604-001393 |
| Деталь: | GUIDE-GEAR_RACK_R, CLX-9201, PC, 0.254, 47.7, 146.51 |
| Парткод: | JC61-04751A |
| Деталь: | GUIDE-GEAR_RACK_F,SCX-6345N/XRX, SUS, PI1.5,81.0,121.5, NTR, PAPER |
| Парткод: | JC61-04750A |
| Деталь: | PMO-GEAR PINION, CLX-9201, HIPS,2, 125,50, 17.4, HR-1360T, Naoto Brown Black, GUIDE |
| Парткод: | JF72-41354A |
| Деталь: | GUIDE-STACKER_LOWER, CLX-9201, PC, 80, 40, Naoto Brown Black |
| Парткод: | JC61-04747A |
| Деталь: | GUIDE-STACKER WIRE, BH,+,-,B,M3, L8, ZPC(BLK), SWRCH18A,- |
| Парткод: | JC61-01438A |
| Деталь: | DADF-MOTOR, CLX-9201, SEC |
| Парткод: | JC97-03993A |
| Деталь: | MOTOR BLDC-TYPE1, CLX-9201, POM, 0.5/1. 0,55/25, BLACK, 30.265/27, JGMA3 |
| Парткод: | JC31-00156A |
| Деталь: | SOLENOID-PICK UP, TR,75mW, BGA, TR |
| Парткод: | JC33-00007A |
| Деталь: | HOLDER-HARNESS, ML-3200ND, DC24V, 125mA, Z24,M1,2.5KGF,SLIM TYPE |
| Парткод: | JC61-04534A |
| Деталь: | BUSH-EXIT, CLX-9201,EGI-SECC,1.0,60, 200, NATURAL |
| Парткод: | JC61-00699B |
| Деталь: | BRACKET-MOTOR, SWP, 0.16,19,2.4,2.7,14, FREE |
| Парткод: | JC61-04627A |
| Деталь: | PHOTO-INTERRUPTER, CLX-9201, HIPS, 197.5, BLACK |
| Парткод: | 0604-001393 |
| Деталь: | CLUTCH-ELECTRIC, CLX-9201, POM,1.0,20, BLACK, 22, JGMA3 |
| Парткод: | JC47-00033A |
| Цена: | 1 200 ₽ |
| Деталь: | GEAR-CAM_OUTER, HWH,+, M3,L6, ZPC(WHT), SWRCH18A, C TYPE |
| Парткод: | JC66-03260A |
| Деталь: | GEAR-PICKUP_IDLE, CLX-9201, POM,1.0,16, BLACK,18.4, JGMA3 |
| Парткод: | JC66-03265A |
| Деталь: | GEAR-REDUCTION, CLX-9201, POM,1.0,28, BLACK,30.0, JGAM3 |
| Парткод: | JC66-03263A |
| Деталь: | GEAR-CAM_INNER, CLX-9350, Fe+Cu+Zn-Slearate |
| Парткод: | JC66-03259A |
| Деталь: | GEAR-EXIT_IDLE, CLX-9201, SEC |
| Парткод: | JC66-03262A |
| Деталь: | SPRING-ES, SPY272, DAMPING GREASE |
| Парткод: | 6107-003036 |
| Деталь: | FRAME-REGI HOLDER DUST, SCX-8040, SEC, WORLD |
| Парткод: | JC93-00078B |
| Цена: | 500 ₽ |
| Деталь: | DRIVE-PICKUP, SCX-8128NA, SEC |
| Парткод: | JC93-00442A |
| Деталь: | DRIVE MAIN, CLX-9201NA, SEC |
| Парткод: | JC93-00448A |
| Деталь: | DRIVE-M FUSER EXIT, SCX-8128NA, SEC |
| Парткод: | JC93-00449A |
| Деталь: | DRIVE-M TONER SUPPLY, SCX-8128NA, SEC |
| Парткод: | JC93-00450A |
| Деталь: | DRIVE-DUCT, SCX-8128NA, SEC |
| Парткод: | JC93-00451A |
| Деталь: | FRAME-MAIN REGI, CLX-9201 |
| Парткод: | JC93-00508A |
| Деталь: | FRAME MAIN-PICKUP 1ST, CLX-9201, SEC |
| Парткод: | JC93-00511A |
| Деталь: | FRAME MAIN-PICKUP 2ND, CLX-9201, SEC |
| Парткод: | JC93-00512A |
| Деталь: | FRAME-MAIN, SCX-8128, SEC, WORLD |
| Парткод: | JC93-00684A |
| Деталь: | MOTOR BLDC, BH,+,S,M4, L6,ZPC(WHT), SWRCH18A |
| Парткод: | JC31-00123B |
| Цена: | 3 700 ₽ |
| Деталь: | MOTOR BLDC, SCX-8128NA, SEC |
| Парткод: | JC31-00123A |
| Деталь: | DRIVE-MAIN SUB MONO, 2000rpm, 1200gfcm, 24V, 2.8A, 1500gfcm |
| Парткод: | JC93-00724A |
| Деталь: | FRAME-MAIN REGI, CLX-9201 |
| Парткод: | JC93-00508A |
| Деталь: | PHOTO-INTERRUPTER, CLX-9201, SECC, T1, 63.5,34 |
| Парткод: | 0604-001381 |
| Деталь: | SHAFT-REGI, CLP-500, Fe+Cu+Zn-Slearate |
| Парткод: | JC66-03302A |
| Деталь: | ROLLER-REGI, CLX-9201, UL10272,3p,75mm, BLK/GRAY, AWG26,173977-3, UL 10272, BOARD TO BOARD WIRE |
| Парткод: | JC66-03180A |
| Деталь: | GEAR-ROLLER REGI, CLX-9201 |
| Парткод: | JC66-03293A |
| Деталь: | SPRING-ES, CLX-9201, SUM22,361.9,14.7, STEEL |
| Парткод: | 6107-001759 |
| Деталь: | DRIVE-M FUSER EXIT, SCX-8128NA, SEC |
| Парткод: | JC93-00449A |
| Деталь: | BRACKET-M DRIVE FUSER EXIT, ML-2150, NYLON, 1,25,8, NTR,27 |
| Парткод: | JC61-04512A |
| Деталь: | GEAR-RDCN EXIT, POLYMIDE, ID6, OD13.5, T0.5, BLK |
| Парткод: | JC66-03108A |
| Деталь: | GEAR-M FUSER ONE WAY, SCX-8128NA, SEC |
| Парткод: | JC66-03141A |
| Деталь: | GEAR-HUB CLUTCH, BH,+,-,S, M3, L6, ZPC(WHT), SWRCH18A,- |
| Парткод: | JC66-00340A |
| Цена: | 220 ₽ |
| Деталь: | GEAR-RDCN FUSER OUT, BH, +, S, M4, L6, ZPC(WHT), SWRCH18A |
| Парткод: | JC66-00417A |
| Цена: | 240 ₽ |
| Деталь: | GEAR-RDCN FUSER RELEASE, PF262(HS), WHITE |
| Парткод: | JC66-03106A |
| Деталь: | GEAR-FUSER RELEASE, SCX-8128NA, POM, 0.5, 71, HELICAL(R) |
| Парткод: | JC66-03107A |
| Деталь: | MOTOR BLDC, SCX-8128NA, EGI-SECC, 1.0T |
| Парткод: | JC31-00123B |
| Цена: | 3 700 ₽ |
| Деталь: | DRIVE-MOTOR STEP, ID5.0, OD11.0, T0.6, PASS, STS304 |
| Парткод: | JC93-00452A |
| Деталь: | PLATEN FR HR-CARRIAGE FR, ID5.0, OD11.0, T0.6, PASS, STS304 |
| Парткод: | JC97-03983A |
| Деталь: | PLATEN FR HR-CARRIAGE HR, CLX-9201, SCANNER |
| Парткод: | JC97-03984A |
| Деталь: | FRAME-BASE, CLX-9201, SCANNER |
| Парткод: | JC61-04674A |
| Деталь: | SPRING-ES, CLX-9201, ABS, 92,52, BLACK |
| Парткод: | 6107-001698 |
| Деталь: | PLATEN FR HR-STRING FRONT, SUS, PI0.8, L42, OD6.4 |
| Парткод: | JC97-03998A |
| Деталь: | PLATEN FR HR-STRING REAR,17PM-K049-P6WS, 1.2A, 5.2W, 2.2V |
| Парткод: | JC97-03999A |
| Деталь: | PLATEN FR HR-RAIL LOWER F, CLX-9201, SECC, 1,409, 532 |
| Парткод: | JC97-03986A |
| Деталь: | PLATEN FR HR-RAIL LOWER R, CLX-9201, UL10272,6 |
| Парткод: | JC97-03987A |
| Деталь: | PLATEN FR HR-RAIL UPPER, CLX-9201, SCANNER |
| Парткод: | JC97-03988A |
| Деталь: | HOLDER-CABLE, ML-9400W, bearing |
| Парткод: | JC61-04572A |
| Деталь: | PHOTO-INTERRUPTER, CLX-9201, SCANNER |
| Парткод: | 0604-001393 |
| Деталь: | RING-E, CLX-9201, SECC, 1.0, 102,41 |
| Парткод: | 6044-000130 |
| Деталь: | RING-E, CLX-9201,SECC, 1.6, 80, 56 |
| Парткод: | 6044-000231 |
| Деталь: | PULLEY-DRIVING, ID7, OD14, T0.8, PASS, STSC |
| Парткод: | JC66-03242A |
| Деталь: | HANDLE-SOCKET SET SCREW, CLX-9201, SUM22, 438, 8 |
| Парткод: | JC64-00508A |
| Деталь: | SHAFT-DRIVING, SF4000, CR RUBBER, W14XL14, BLK,3 |
| Парткод: | JC66-03186A |
| Деталь: | PULLEY-BELT, CLX-9201, SCANNER |
| Парткод: | JC66-02257A |
| Деталь: | FLAT CABLE-CCD IF, CLX-9201, SCANNER |
| Парткод: | JC39-01673A |
| Деталь: | FOOT-SF4000, DAGM-15,10. 5X5.0, Nylon66 |
| Парткод: | JG61-40001A |
| Деталь: | BELT-TIMING GEAR, CLX-9201, PC, BLACK,8,33 |
| Парткод: | 6602-001725 |
| Деталь: | BRACKET-SUPPORT, CLX-9350, SWCH18A, 4,6 |
| Парткод: | JC61-04629A |
| Деталь: | MOTOR STEP, CLX-9201, SCANNER |
| Парткод: | JC31-00158A |
| Деталь: | BRACKET-MOTOR, CLX-9201, 40P,600mm, AWM20624, 1.0mm |
| Парткод: | JC61-04630A |
| Деталь: | CABLE CLAMP, HWH,+,M3, L6,ZPC(WHT), SWRCH18A, C TYPE |
| Парткод: | 6502-001152 |
| Деталь: | FRAME-BASE MP, CLX-9201, SUM22,194.6, 6 |
| Парткод: | JC61-04764A |
| Деталь: | PHOTO-INTERRUPTER, CLX-9201, SEC |
| Парткод: | 0604-001393 |
| Деталь: | SHEET-STOPPER, CLX-9201, POM,6,13,10, BLACK, M90-44 |
| Парткод: | JC63-03359A |
| Деталь: | PAD-MP, SUS304,0.65,17,5.15,6.45 |
| Парткод: | JC69-02047A |
| Деталь: | SHEET-GUIDE MP, NYLON,CLX-9350,0.7T, W11.4*L44, Flocking, BLK |
| Парткод: | JC63-03358A |
| Деталь: | BRACKET-GEAR MP, ID4, OD9, T0.6, STSC |
| Парткод: | JC61-04755A |
| Деталь: | SHAFT-RETARD MP, CLX-9201, PET,0.188, 10, 40 |
| Парткод: | JC66-03223A |
| Деталь: | FRAME-TRAY-LOWER, CLX-9201, HIPS, 31.5,105, 15.5, FG-1790, G32690, PAPER |
| Парткод: | JC61-04759A |
| Деталь: | FRAME-TRAY-UPPER, CLX-9201, HIPS, 168, 116.7,12, FG-1790, G32690, PAPER |
| Парткод: | JC61-04758A |
| Деталь: | GUIDE-TRAY PAPER, CLX-9201, SEC |
| Парткод: | JC61-04763A |
| Деталь: | BRACKET-TRAY GUIDE, CLX-9201, POM,1, 170, NATURAL, DE500P, RACK |
| Парткод: | JC61-04757A |
| Деталь: | GUIDE-SIDE R, CLX-9201, POM,94.7,7, NATURAL |
| Парткод: | JC61-04761A |
| Деталь: | GEAR-RACK, PWH,+,-,B,M3, L6, ZPC(WHT), SWRCH18A,- |
| Парткод: | JC66-03216A |
| Деталь: | LINK-SIDE, COMMON,WHITE PET,0.05T, 65,26,2 COLOR, TRAY STAMP, COMMON |
| Парткод: | JC66-03220A |
| Деталь: | GEAR-PINION, CLX-9201, HIPS, NATURAL BLUE, 342.7, 213.5, HR-1360T |
| Парткод: | JG66-40003A |
| Цена: | 260 ₽ |
| Деталь: | GUIDE-SIDE F, CLX-9201, ABS, G32690, 331, 187, HF-0660I |
| Парткод: | JC61-04760A |
Коды ошибок
A1-1111, A1-1113
A1-1211, A1-1213
A1-2111, A1-2113
A1-5113, A1-5512, A1-5513, A1-5610
A2-2810, A2-2811, A2-2910, A2-2911
A3-3111, A3-3112, A3-3113, A3-3114
A3-3210, A3-3211, A3-3212
A3-3310, A3-3311, A3-3312, A3-3410, A3-3411, A3-3412
C1-1110
C1-1130, C1-1140
C1-1311
C1-1411
C1-1512
C3-1110, C3-1130, C3-1140
C3-1211
C3-1411
C3-1422
C3-1512
C6-1310
C7-1110, C7-1130
C7-1311
C9-2110, C9-2120
C9-2220
H1-1311, H1-1312, H1-1313, H1-1314, H1-1315, H1-1317, H1-1318
H1-1322
H1-1351, H1-1352
H1-1353
H1-1411, H1-1412, H1-1417, H1-1418
H1-1422
H1-1451, H1-1452
H1-1453
H1-5323
H1-5330
H2-6700, H2-6701, H2-6702, H2-6703, H2-6704, H2-6705
H2-6706
H2-6707 ... H2-6725
H2-6726, H2-6727
H2-6728, H2-6729, H2-6730, H2-6731
H2-6732, H2-6733
H2-6734
H2-6735
H2-6736 ... H2-6743
H2-6744
H2-6A50
H2-6A63
M1-1113, M2-1121
M1-1213, M2-1131
M1-1610
M1-3122
M1-3222
M1-4111
M1-4211
M1-5111, M1-5112
M1-5211, M1-5212
M1-5612
M2-1124, M2-1125
M2-1134, M2-1135
M2-1211, M2-1213, M2-1214
M2-1331, M2-1333, M2-1334, M2-2111, M2-2113, M2-2114
M3-1411
M3-1413, M3-1414
M3-2230, M3-2430
S1-1113
S1-1114
S1-1313
S1-1411, S1-1413
S1-2111
S1-2411, S1-2421, S1-2422
S1-2510, S1-2511, S1-2521, S1-2523, S1-2540
S1-4111
S1-4311
S1-5521
S2-1211
S2-2311
S2-4210
S2-4410
S3-3111
S3-3121
S3-3211, S3-3213, S3-3214, S3-3215, S3-3216, S3-3217
S5-3111
S6-3122
S6-3123
S6-3128
S7-2110
U1-2113, U1-2119
U1-2115
U1-2132, U1-2135
U1-2141, U1-2142
U1-2316, U1-2317
U1-2335, U1-233A
U1-2337, U1-233D
U2-1111, U2-1112, U2-1113, U2-1114
U3-3113, U3-3211, U3-3212, U3-3213, U3-3214, U3-3312, U3-3314
U3-3311, U3-3313
U3-3411, U3-3413, U3-3414
U3-3711, U3-3713, U3-3714
U3-4210
Описание
| Error code: | A1-1111, A1-1113 |
| Display: | Motor Failure: #A1-1111. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1113. Turn off then on. Call for service if the problem persists. |
| Description: | Motor Failure: #A1-1111. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1113. Turn off then on. Call for service if the problem persists. |
| Causes: | Regi/MP motor operation is abnormal. • A1–1111 : Regi/MP motor is stopped but machine recognizes it as operational. • A1–1113 : Regi/MP motor is operating but machine recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around Regi./MP unit. 3) Remove the rear cover. 4) Check if the Regi/MP motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0000) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-1211, A1-1213 |
| Display: | Motor Failure: #A1-1211. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1213. Turn off then on. Call for service if the problem persists. |
| Description: | Motor Failure: #A1-1211. Turn off then on. Call for service if the problem persists Motor Failure: #A1-1213. Turn off then on. Call for service if the problem persists |
| Causes: | Fuser motor operation is abnormal. • A1–1211 : Fuser motor is stopped but machine recognizes it as operational. • A1–1213 : Fuser motor is operating but recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around fuser unit. 3) Remove the rear cover. 4) Check if the fuser motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0120) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-2111, A1-2113 |
| Display: | Motor Failure: #. Turn off then on. Call for service if the problem persists. |
| Description: | Motor Failure: #A1-2111. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-2113. Turn off then on. Call for service if the problem persists. |
| Causes: | OPC motor does not operate. / OPC motor is operational but machine recognizes status as stopped. |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around drum drive unit. 3) Remove the rear cover 4) Check if the OPC motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter the SVC mode. Select the yellow OPC motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0044) a) If the motor does not operates. i) Check the signal and power with the DVM. ii) If the checked result is normal, replace the BLDC motor(JC31-00123B). iii) If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - if the control signal is abnormal, replace the main board(JC92–02746A) b) If the motor is operational, check the Pin Num 8. i) If the value is abnormal, replace the main board. ii) If the value is normal, replace the harness. |
| Error code: | A1-5113, A1-5512, A1-5513, A1-5610 |
| Display: | Motor Failure: #. Turn off then on. Call for service if the problem persists. |
| Description: | Toner is not supplied normally. |
| Remedy: | 1) Open the front cover. If the toner pipe is blocked, open it. 2) Turn the machine off then on. If the error persists, check the following steps. 3) Enter the SVC mode. Select the toner supply motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 111-0040) 4) If the motor does not operate, measure the motor power with DVM. - Measure 2points together. a) If 24V power is supplied, replace the Toner supply motor(JC31-00123B). b) If 24V power is not supplied, check the SMPS and main moard i) If 24V power is not generated, replace the SMPS board(JC44-00100A (220V) / JC44-00093A (110V)). ii) If the control signal is abnormal, replace the Main board(JC92-02452A). |
| Error code: | A2-2810, A2-2811, A2-2910, A2-2911 |
| Display: | Fan Failure: #. Turn off then on. Call for service if the problem persists. |
| Description: | Ozone Fan or OPC In fan fan does not operate. |
| Remedy: | NOTE • Ozone fan error : A2-2810 / A2-2811 • OPC In fan error : A2-2910 / A2-2911 1) Turn the machine off. 2) Remove the rear cover. 3) Check if the corresponding fan connector is connected correctly. 4) If the connection is OK, enter the SVC mode and execute fan test. (Diagnostics > Engine Dignostics > Engine Test Routines > 100-0260, 109-0040) 5) If the fan does not operate, measure the fan power. (Red line) - Measure the Red line a) If 24V power is generated, replace the defective fan. b) If 24V power is not generated, check the SMPS and main board. i) Measure 24V power on the SMPS board. If the SMPS board(JC44-00100A (220V) / JC44-00093A (110V)) is defective, replace it. ii) If the SMPS board is normal, replace the Main board(JC92-02452A). 6) If the fan operation is normal but the error persists, a) Check the yellow line signal with DVM. b) Check fan operation as connection or disconnection. i) If the Lock signal is 0V continually, check the harness. ii) If the harness is OK, replace the Main board(JC92-02452A). iii) If the signal value is different from the table above, replace the Fan(JC93-00500A). |
| Error code: | A3-3111, A3-3112, A3-3113, A3-3114 |
| Display: | Sensor Failure: #. Turn off then on. Call for service if the problem persists. |
| Description: | The NC sensor in the fuser unit is defective. / The sensor signal is abnormal due to adefective harness. |
| Remedy: | 1) Enter the SVC mode. Execute the sensor test to check the sensor operation. (Diagnostics > Engine Diagnostics > Engine Test Routines >) - 109-0000 : Fuser Temperature A - 109-0010 : Fuser Temperature B 2) Remove and disassemble the fuser unit. 3) Measure the resistance value of the Thermistor (1404-001453). If the measured value is out of 307KOm - 430KOm at 25C, replace the thermistor. 4) If the error persists, replace the Fuser unit (JC91-01049A(220V) / JC91-01050A (110V)). 5) If the error persists after replacing fuser unit, replace the Main board(JC92-02452A). |
| Error code: | A3-3210, A3-3211, A3-3212 |
| Display: | Sensor Failure: #. Turn off then on. Call for service if the problem persists. |
| Description: | Sensor Failure: #A3-3210. Turn off then on. Call for service if the problem persists Sensor Failure: #A3-3211. Turn off then on. Call for service if the problem persists Sensor Failure: #A3-3212. Turn off then on. Call for service if the problem persists |
| Causes: | Inner temperature sensor is defective. • A3–3210 : Inner temperature sensor value is abnormal. • A3–3211 : Inner temperature sensor is in short status. • A3–3212 : Inner temperature sensor is in open status. |
| Remedy: | 1) Open the side cover. Check the connection. • If the connection is OK, replace the photo sensor (1404-001417). 2) If the sensor is normal, replace the main board(JC92-02742A). |
| Error code: | A3-3310, A3-3311, A3-3312, A3-3410, A3-3411, A3-3412 |
| Display: | Sensor Failure: #. Turn off then on. Call for service if the problem persists. |
| Description: | External temperature sensor is defective. / Humidity sensor is defective. |
| Remedy: | • A3-3310, A3-3311, A3-3312 : External temperature sensor • A3-3410, A3-3411, A3-3412 : Humidity sensor 1) Turn the machine off. 2) Enter SVC mode. Execute sensor test to check the sensor operation. (Diagnostics > Engine Diagnostics > Engine Test Routines > 109-0013) 3) Open the side cover. Measure the resistance value of the connector at both ends. - If the values is not in 10Kom +- 1% (at 25C), replace the Photo sensor (JC93.00486A). 4) If the sensor is normal, replace the Main board(JC92-02452A). |
| Error code: | C1-1110 |
| Display: | Prepare new yellow toner cartridge. |
| Description: | Toner remained is 5 - 30% of its life. |
| Causes: | Toner cartridge is almost empty. |
| Remedy: | 1) Open the front cover. 2) Remove the toner cartridge(MLT-D709S). (Toner cartridge with level of “Low” will be exhausted soon.) |
| Error code: | C1-1130, C1-1140 |
| Display: | End of life, Replace with new toner cartridge. |
| Description: | The toner cartridge is at the end of its life. |
| Remedy: | 1) Print the supply information report. 2) Check the life remaining of the toner cartridge. 3) If its life is at the end, turn the machine off and open the front cover. 4) Replace the toner cartridge with new one(MLT-D709S). |
| Error code: | C1-1311 |
| Display: | Imaging Unit Failure: #C3-1312. Install imaging unit again |
| Description: | Toner supply is inefficient or abnormal. |
| Remedy: | 1) Turn the machine off. Open the front cover 2) Remove the toner cartridge. Shake the toner cartridge horizontally to distribute the toner evenly inside the cartridge. 3) If the problem persists, check the follows. a) Check if the Toner Supply Drive Unit(JC93-00436A) is defective. b) Check if the Toner Duct Drive Unit(JC93-00451A) is defective. 4) If the problem persists, replace the Toner cartridge(MLT-D709S). |
| Error code: | C1-1411 |
| Display: | Toner cartridge is not installed. Install it. |
| Description: | Toner cartridge is not installed. Install the cartridge |
| Causes: | The toner cartridge is not installed. / The machine can’t detect the toner cartridge. |
| Remedy: | 1) Turn the machine off then on. 2) Remove the toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge. 3) Check if the CRUM contact area is contaminated. Clean it. |
| Error code: | C1-1512 |
| Display: | Toner cartridge is not compatible. Check users guide. |
| Description: | Toner cartridge is not compatible. Check users guide. |
| Causes: | Toner cartridge is not compatible. |
| Remedy: | 1) Print the supply information report. Check information of the toner cartridge. 2) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one. |
| Error code: | C3-1110, C3-1130, C3-1140 |
| Display: | Prepare new imaging unit Replace with new imaging unit. |
| Description: | Prepare new imaging unit Replace with new imaging unit. |
| Causes: | The Imaging unit has almost reached the end of life. |
| Remedy: | 1) Open the front cover and remove the waste toner container. 2) Remove the imaging unit. 3) If its life is at the end, replace the drum unit and developer with new one. |
| Error code: | C3-1211 |
| Display: | Imaging Unit Failure:#C3-1211. Please turn off then on. |
| Description: | Imaging Unit Failure:#C3-1211. Please turn off then on. |
| Causes: | Sensor calibration error that detects the toner density for image stabilization control has occurred. |
| Remedy: | 1) Open the front cover and remove the waste toner container. 2) Remove the imaging unit. 3) If its life is at the end, replace the drum unit and developer with new one. |
| Error code: | C3-1411 |
| Display: | Imaging unit is not installed. Install the unit. |
| Description: | Imaging unit is not installed. Install the unit |
| Causes: | The imaging unit is not installed. / The machine can’t detect the imaging unit. |
| Remedy: | 1) Open the front cover. Check if the imaging unit is installed. 2) Remove and reinstall the imaging unit. 3) Check if the contact terminal is contaminated or broken. Clean the contact terminal. 4) Check if the CRUM harness is connected correctly. Reconnect it. 5) If the harness is defective, replace it. 6) If the problem persists, replace the imaging unit with new one. |
| Error code: | C3-1422 |
| Display: | Imaging unit is not installed. Install the unit. |
| Description: | Imaging unit requires chargers cleaning. Clean the unit. |
| Causes: | The imaging unit needs to clean. |
| Remedy: | 1) Open the front cover and remove the waste toner container. 2) Clean the drum unit by charger cleaner. 3) If its life is at the end, replace the drum unit and developer with new one. |
| Error code: | C3-1512 |
| Display: | Imaging unit is not compatible. Check user`s guide |
| Description: | Imaging unit is not compatible. Check the user guide |
| Causes: | Imaging unit is not compatible. |
| Remedy: | 1) Open the front cover. Remove the imaging unit. 2) Check if the label information of the imaging unit is same with the machine’s one. (ex. /SEE) 3) If label information is different from the machine or the imaging unit is not a samsung genuine, replace it with a new one. |
| Error code: | C6-1310 |
| Display: | Fuser unit is not installed. Install it |
| Description: | Fuser unit is not installed. Install it. |
| Causes: | The fuser unit is not installed or fuser unit connector is not connected properly. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, turn the machine off again. 3) Open the side cover. Check if the fuser unit is installed. If not, install the fuser unit. 4) If the fuser unit is installed, remove it. 5) Check if the fuser draw connector (JC39–01677A) is broken or defective. 6) Install the fuser unit. 7) If the problem persists, replace the fuser unit(JC91-01157A (220V) /JC91-01158A (110V)). |
| Error code: | C7-1110, C7-1130 |
| Display: | Waste toner container is almost full. Order new one. Waste toner container is full. Replace it. |
| Description: | Waste toner container is almost full. Order new one. Waste toner container is full. Replace it. |
| Causes: | The life of the waste toner container expires soon or has expired. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. Install a new waste toner container. 3) Close the front cover. |
| Error code: | C7-1311 |
| Display: | Waste toner container is not installed. Install it. |
| Description: | Not Installed Waste tank |
| Causes: | The waste toner container is not installed |
| Remedy: | 1) Check if the waste toner container is installed properly. 2) Remove and reinstall the waste toner container. |
| Error code: | C9-2110, C9-2120 |
| Display: | Replace with new Transfer roller. |
| Description: | Replace with new Transfer roller. |
| Causes: | The life of the second transfer roller(T2) expires soon or has expired. |
| Remedy: | 1) Open the side cover. 2) Replace the second transfer roller(JC95-01942A) with a new one. 3) Close the side cover. 4) Enter SVC mode. • To enter the service mode, tap "Service Mode" App. When the password dialog box appears, enter “1934” and press the “OK” button. 5) Select “TRANSFER” (INFORMATION > Supply Status > Field Replacement Unit > TRANSFER) 6) Select “T2 Roller”. The “RESET” button will be activated. Click “RESET” to clear the T2 Roller count. 7) Exit the SVC mode by pushing the home button. |
| Error code: | C9-2220 |
| Display: | TR Failure: #C9-2220. Install transfer roller again. |
| Description: | TR Failure: #C9-2220. Install transfer roller again |
| Causes: | The life of the second transfer roller(T2) is not installed. |
| Remedy: | 1) Open the side cover. 2) Remove and reinstall the second transfer roller. 3) Close the side cover. 4) If the problem persists, replace the HVPS board(JC44–00212A). |
| Error code: | H1-1311, H1-1312, H1-1313, H1-1314, H1-1315, H1-1317, H1-1318 |
| Display: | Paper jam in Tray 3. |
| Description: | Paper jam has occurred in tray3. (Pick up unit connection is defective. / Pickup rollers are defective. / Feed sensor is defective.) |
| Remedy: | 1) Open the DCF Take Away-Cover. Remove the jammed paper. 2) Remove tray3. Remove the jammed paper. Close the DCF Take Away-Cover and insert tray3. 3) If this jam error occurs frequently, check the rollers below. a) Remove the tray3 and tray4. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93-00540A). 4) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the DCF pick up unit1. Check if the feed sensor cable is connected correctly. b) Check if the sensor cable on DCF board is connected correctly. c) If the connection is OK, replace the feed sensor(0604-001381). d) Install the DCF pick up unit1. 5) If the problem persists after checking step 3~4, check the following. a) Remove the DCF pick up unit1. Check if the sensor and actuator are assembled correctly. b) When pushing the pickup lever, check if the pick up rollers are down. c) Replace the DCF pick up unit1(JC93-00513A) or defective part. 6) Check the DCF feed motor. a) Check if the DCF feed motor cable is connected correctly. b) If the connection is OK, replace the DCF feed drive unit(JC93-00447A). 7) Check the DCF pick up motor. a) Check if the DCF pick up motor cable is connected correctly. b) If the connection is OK, replace the DCF pick up drive unit(JC93-00442A). |
| Error code: | H1-1322 |
| Display: | Tray 3 cassette is pulled out. Insert it properly. |
| Description: | Tray 3 cassette is pulled out. Insert it properly. |
| Causes: | Tray 3 is pulled out or the auto size sensor connector is not connected or broken. |
| Remedy: | 1) Remove and insert tray3 correctly. 2) If the problem persists, remove tray3 and tray4. Look inside machine. 3) Check if the auto size sensor cable is connected correctly. Unplug and reconnect it. 4) If the connection is OK, replace the auto size sensor(JC93-00018A). 5) If the problem persists, replace the DCF board(JC92-02453A). |
| Error code: | H1-1351, H1-1352 |
| Display: | Paper is low in Tray 3. Load paper. Paper is empty in Tray 3. Load paper. |
| Description: | Paper in the tray is less than 10%. / The photo sensor is defective.). |
| Causes: | Paper in the tray3 is less than 10% of specification or empty. / The photo sensor is defective. |
| Remedy: | 1) Remove tray3. Load the paper in the tray3. 2) If paper is loaded but error message has not disappeared, check the following. a) Remove the DCF pick up unit1. b) Check if the photo sensor in the DCF pick up unit1 is contaminated. If so, clean it. c) If the photo sensor(0604-001393) is defective, replace it. d) If the actuator(JC66-03199A) is defective, replace it. |
| Error code: | H1-1353 |
| Display: | Input System Failure #H1-1353 : Pull Tray 3 out and insert it. |
| Description: | Input System Failure #H1-1353 : Pull Tray 3 out and insert it. |
| Causes: | The paper is not fed from tray3. |
| Remedy: | 1) Remove and insert tray3 correctly. 2) Turn the machine off then on. 3) If the problem persists, turn the machine off. 4) Remove the Bracket Rear Cover after removing 5 screws. 5) Check if the connection between the DCF pick up drive and DCF board is correct. 6) If the connection is OK, replace the pick up drive unit(JC93-00442A). 7) If the problem persists, check the following. a) Remove the DCF pick up unit1. b) Check if the photo sensor in the DCF pick up unit1 is contaminated, clean it. c) If the photo sensor(0604-001393) is defective, replace it. |
| Error code: | H1-1411, H1-1412, H1-1417, H1-1418 |
| Display: | Paper jam in Tray 4. |
| Description: | Paper jam has occurred in tray4. (Pick up unit connection is defective. / Pickup rollers are defective. / Feed sensor is defective.) |
| Remedy: | 1) Open the DCF Take Away-Cover. Remove the jammed paper. 2) Remove tray4. Remove the jammed paper. Close the DCF Take Away-Cover and insert tray4. 3) If this jam error occurs frequently, check the follows. a) Remove tray3 and tray4. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93-00540A). 4) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the DCF pick up unit2. Check if the feed sensor cable is connected correctly. b) Check if the sensor cable on DCF board is connected correctly. c) If the connection is OK, replace the feed sensor(0604-001381). d) Install the DCF pick up unit2. 5) If the problem persists after checking step 3~4, check the following. a) Remove the DCF pick up unit2. Check if the sensor and actuator are assembled correctly. b) When pushing the pickup lever, check if the pick up rollers are down. c) Replace the DCF pick up unit2(JC93-00513A) or defective part. 6) Check the DCF feed motor. a) Check if the DCF feed motor cable is connected correctly. b) If the connection is OK, replace the DCF feed drive unit(JC93-00447A). 7) Check the DCF pick up motor. a) Check if the DCF pick up motor cable is connected correctly. b) If the connection is OK, replace the DCF pick up drive unit(JC93-00442A). |
| Error code: | H1-1422 |
| Display: | Tray 4 cassette is pulled out. Insert it properly. |
| Description: | Tray 4 cassette is pulled out. Insert it properly. |
| Causes: | Tray 4 is pulled out or the auto size sensor connector is not connected or is broken. |
| Remedy: | 1) Remove and insert tray4 correctly. 2) If the problem persists, remove tray3 and tray4. Look inside machine. 3) Check if the auto size sensor cable is connected correctly. Unplug and reconnect it. 4) If the connection is OK, replace the auto size sensor(JC93-00018A). 5) If the problem persists, replace the DCF board(JC92-02453A). |
| Error code: | H1-1451, H1-1452 |
| Display: | Paper is low in Tray 4. Load paper. Paper is empty in Tray 4. Load paper. |
| Description: | Paper in tray4 is less than 10%. / The photo sensor is defective. |
| Causes: | Paper in the tray4 is less than 10% of specification. / The photo sensor is defective. |
| Remedy: | 1) Remove the tray4. Load the paper in the tray4. 2) If paper is loaded but error message has not disappeared, check the following. a) Remove the DCF pick up unit2. b) Check if the photo sensor in the DCF pick up unit2 is contaminated. If so, clean it. c) If the photo sensor(0604-001393) is defective, replace it. d) If the actuator(JC66-03199A) is defective, replace it. |
| Error code: | H1-1453 |
| Display: | Input System Failure #H1-1453 : Pull Tray 4 out and insert it. |
| Description: | Input System Failure #H1-1453 : Pull Tray 4 out and insert it. |
| Causes: | The paper is not fed from tray4. |
| Remedy: | 1) Remove and insert tray4 correctly. 2) Turn the machine off then on. 3) If the problem persists, turn the machine off. 4) Remove the Bracket Rear Cover after removing 5 screws. 5) Check if the connection between the DCF pick up drive and DCF board is correct. 6) If the connection is OK, replace the pick up drive unit(JC93-00442A). 7) If the problem persists, check the following. a) Remove the DCF pick up unit2. b) Check if the photo sensor in the DCF pick up unit2 is contaminated. If so, clean it. c) If the photo sensor(0604-001393) is defective, replace it. |
| Error code: | H1-5323 |
| Display: | Tray door is open. Close the door |
| Description: | Tray door is open. Close the door |
| Causes: | DCF Takeaway-Cover is open. / I/L-Switch harness or connector is defective. |
| Remedy: | 1) Open and close the DCF Take away-Cover correctly. 2) If the problem persists, check the following. a) Check if I/L-Switch(HARNESS-DCF COVER OPEN)(JC39–01696A) is not operating normally. If it is defective, replace it. b) If the I/L Switch is OK, replace the DCF board(JC92–02453A). |
| Error code: | H1-5330 |
| Display: | DCF Failure #H1-5330. Check internal DCF connection. |
| Description: | DCF Failure #H1-5330. Check internal DCF connection. |
| Causes: | A communication error between the optional tray and the main machine has occurred. |
| Remedy: | 1) Lift up and release the DCF unit from the machine. 2) Remove the Bracket Rear Cover after removing 5 screws. 3) Check if the interface connector is connected to the DCF board. If the interface connector(JC39–01690A) is defective, replace it. 4) If the problem persists, replace the DCF board. |
| Error code: | H2-6700, H2-6701, H2-6702, H2-6703, H2-6704, H2-6705 |
| Display: | Paper jam inside of finisher Paper jam at exit of finisher |
| Description: | Paper failed to pass finisher`s paper transportation path within the specified time. |
| Remedy: | 1) Open finisher jam cover, and make sure that the paper is on the paper path. If there is paper, remove paper manually. 2) If the error does not disappear even after removing paper and closing finisher jam door, follow the instructions below: a) Does finisher input sensor work well? i) Make sure finisher input sensor cable is connected well to the sensor connector. ii) Make sure finisher input sensor cable is connected well to the main board connector. iii) Replace the finisher input sensor(JC81-09686A). iv) Replace the finisher main board(JC81-09692A). b) Check if any debris is present. Please make sure to remove any debris. |
| Error code: | H2-6706 |
| Display: | Finisher Failure: #H2-6706. Check finisher |
| Description: | Finisher Failure: #H2-6706. Check finisher |
| Causes: | Transport motor does not work during Initializing. |
| Remedy: | 1) If there is jammed paper on the paper path, removing paper manually. Open and close finisher stapler door or jam cover to check if finisher executes initialization process. If component still doesn’t go back to home position and error does not disappear, follow the instructions below: 2) Does the transport motor work well? a) Make sure transport motor cable is connected well to the motor connector. b) Make sure transport motor cable is connected well to the finisher main board. c) Replace the transport motor. d) Replace the finisher main board. |
| Error code: | H2-6707 ... H2-6725 |
| Display: | Finisher Failure: #H2-67xx. Check finisher |
| Description: | Component does not move to or leave home position. |
| Remedy: | 1) If there is jammed paper on the paper path, remove paper manually. Open and close finisher stapler door or jam cover to check if finisher executes initialization process. 2) If component still doesn’t go back to home position and error does not disappear, follow the instructions below: a) Does finisher input sensor work well? i) Make sure finisher input sensor cable is connected well to the sensor connector. ii) Make sure finisher input sensor cable is connected well to the main board connector. iii) Replace the finisher input sensor(JC81-09686A). iv) Replace the finisher main board(JC81-09692A). b) Does finisher component motor work well? i) Make sure finisher component motor cable is connected well to the motor connector. ii) Make sure finisher component motor cable is connected well to the main board connector. iii) Replace the finisher component motor(JC81-09680A / JC81-09681A). iv) Replace the finisher main board(JC81-09692A). c) Do finisher component parts work well? i) Make sure component parts can move or rotate smoothly. ii) Make sure there is no any mechanical interference to stop moving or rotating. iii) Make sure the belt is tight on the correct position, if it has the belt. d) Does finisher component motor gear set work well? i) Make sure gear set can rotate smoothly. ii) Make sure each gear is not broken. iii) Replace the Eject-Sub Assy. e) Check if any debris existed. Please make sure to remove any debris. |
| Error code: | H2-6726, H2-6727 |
| Display: | Finisher Stapler door is open. Close it. Finisher Jam door is open. Close it. |
| Description: | Finisher Stapler door is open. Close it Finisher Top door is open. Close it |
| Causes: | Finisher door is not closed. |
| Remedy: | 1) Close door to do finisher initialization. If error does not disappear, follow the instructions below : 2) Does finisher door cover can close well? a) The finisher door cover itself can be closed well. b) The both of the finisher door covers can push door open sensor switch well. c) The finisher door open sensor switch can be pushed well. d) Replace finisher cover door or switch. 3) Does finisher input sensor work well? a) Make sure finisher input sensor cable is connected well to the sensor connector. b) Make sure finisher input sensor cable is connected well to the main board connector. c) Replace the finisher input sensor(JC90-01301A). d) Replace the finisher main board(JC92-02774A). |
| Error code: | H2-6728, H2-6729, H2-6730, H2-6731 |
| Display: | Finisher Failure: #H2-67xx. Check finisher. |
| Description: | Finisher stapler head does not move to or leave home position. |
| Remedy: | 1) If there is jammed paper on the stapler, removing paper manually. Open and close finisher stapler door or jam cover to check if finisher executes initialization process. 2) If stapler still doesn’t go back to home position and error does not disappear, follow the instructions below : a) Can finisher stapler cartridge can be pulled out? i) Rotate stapler gear manually to move stapler head back to home (top) position. ii) Remove staple completely from stapler cartridge. iii) Remove staples from inside stapler. b) Does finisher stapler input sensor work well? i) Make sure finisher input sensor cable is connected well to the sensor connector. ii) Make sure finisher input sensor cable is connected well to the main board connector. iii) Replace the finisher stapler(JC81-07376A). iv) Replace the finisher main board(JC81-09692A). c) Does finisher stapler motor work well? i) Make sure finisher stapler motor cable is connected well to the stapler motor connector. ii) Make sure finisher stapler motor cable is connected well to the main board connector. iii) Replace the finisher stapler(JC81-07376A). iv) Replace the finisher main board(JC81-09692A). d) Check if any debris (staple) exists. Please make sure to remove any debris. |
| Error code: | H2-6732, H2-6733 |
| Display: | Staple cartridge is low. Replace it. Staple cartridge is empty. Replace it. |
| Description: | Staple cartridge is low. Replace it. Staple cartridge is empty. Replace it. |
| Causes: | Finisher stapler cartridge is necessary to refill. |
| Remedy: | 1) Open finisher stapler door to refill cartridge and then close door. Self-Priming will be executed automatically if necessary. If stapler error or warning does not disappear, follow the instructions below : 2) Does finisher stapler cartridge refill box equip well? a) Make sure stapler refill box equip well into cartridge. (JC81-07408A) b) Make sure staples doesn’t jam near stapler head. 3) Does finisher stapler input sensor work well? a) Make sure finisher input sensor cable is connected well to the sensor connector. b) Make sure finisher input sensor cable is connected well to the main board connector. c) Replace the finisher stapler(JC81-07917A). d) Replace the finisher main board. |
| Error code: | H2-6734 |
| Display: | Finisher Failure: #H2-6734. Check finisher |
| Description: | Finisher Failure: #H2-6734. Check finisher |
| Causes: | Stapler initialization is failed. |
| Remedy: | 1) Remove and reassemble the staple unit. 2) If necessary, replace the staple unit. 3) If necessary, replace the finisher main board. |
| Error code: | H2-6735 |
| Display: | Too much paper in finisher stacker. Remove printed paper. |
| Description: | Too much paper in finisher stacker. Remove printed paper |
| Causes: | Finisher Top tray is full. |
| Remedy: | 1) Remove paper on the finisher main tray. Main tray will move downward and upward to clear stack full warning. If warning does not disappear, follow the instructions below : 2) Does Top tray limit sensor work well? a) Make sure Top tray limit sensor cable is connected well to the sensor connector. b) Make sure Top tray limit sensor cable is connected well to the main board connector. c) Check the tray limit actuator’s condition. (JC66-04200A) d) Replace the Top tray limit sensor(JC39-02178A). e) Replace the finisher main board. 3) Does finisher main tray motor work well? a) Make sure finisher top tray motor cable is connected well to the main tray motor connector. b) Make sure finisher top tray motor cable is connected well to the main board connector. c) Replace the finisher main tray motor. d) Replace the finisher main board. 4) Check if any debris(staple)existed. Please make sure to remove any debris. |
| Error code: | H2-6736 ... H2-6743 |
| Display: | Finisher Failure: #H2-67xx. Check finisher |
| Description: | Main Tray does not move to or leave home position. |
| Remedy: | 1) If there is jammed paper on the Main Tray, removing paper manually. Open and close finisher stapler door or jam cover to check if finisher executes initialization process. 2) If Main Tray still doesn’t go back to home position and error does not disappear, follow the instructions below: a) Does finisher input sensor (Standby & Home sensor) work well? i) Make sure finisher input sensor cable is connected well to the sensor connector. ii) Make sure finisher input sensor cable is connected well to the main board connector. iii) Replace the finisher input sensor(JC81-09686A). iv) Replace the finisher main board(JC81-09692A). b) Does finisher Main Tray motor work well? i) Make sure finisher Main Tray motor cable is connected well to the motor connector. ii) Make sure finisher Main Tray motor cable is connected well to the main board connector. iii) Replace the finisher Main Tray motor(JC81-09679A). iv) Replace the finisher main board(JC81-09692A). b) Does finisher Main Tray motor work well? i) Make sure finisher Main Tray motor cable is connected well to the motor connector. ii) Make sure finisher Main Tray motor cable is connected well to the main board connector. iii) Replace the finisher Main Tray motor(JC81-09679A). iv) Replace the finisher main board(JC81-09692A). c) Do finisher Main Tray parts work well? i) Make sure Main Tray parts can move or rotate smoothly. ii) Make sure there are no mechanical interference to stop moving or rotating. iii) Make sure the belt is tight in the correct position, if it has a belt. d) Does finisher Main Tray motor gear set work well? i) Make sure gear set can rotate smoothly. ii) Make sure each gear is not broken. iii) Replace the gear set(JC81-9585A / JC81-09586A). e) Check if any debris is present. Please make sure to remove any debris. |
| Error code: | H2-6744 |
| Display: | Staple Cartridge not install. Install it. |
| Description: | Finisher Failure: #H2-6A63. Check finisher. |
| Causes: | Finisher stapler cartridge is not installed into stapler. |
| Remedy: | 1) Open finisher stapler door to put back cartridge into stapler and then close door. Self-Priming will be executed automatically if necessary. If stapler warning does not disappear, follow the instructions below : 2) Does finisher stapler input sensor work well? a) Make sure finisher input sensor cable is connected well to the sensor connector. b) Make sure finisher input sensor cable is connected well to the main board connector. c) Replace the finisher stapler cartridge. (JC81-07408A) d) Replace the finisher stapler. (JC81-07917A) e) Replace the finisher main board. 3) Check if any debris(staple)existed. Please make sure to remove any debris. |
| Error code: | H2-6A50 |
| Display: | Finisher Failure: #H2-6A50. Check finisher. |
| Description: | Finisher Failure: #H2-6A50. Check finisher |
| Causes: | Communication error with finisher |
| Remedy: | 1) Copier power off and power on. If the error does not disappear, follow the instructions below: 2) Does finisher work well? a) Make sure finisher interface cable is connected with main board. b) Replace the finisher main board. |
| Error code: | H2-6A63 |
| Display: | Finisher Failure: #H2-6A63. Check finisher. |
| Description: | Staple cartridge is empty. Replace it |
| Causes: | Finisher stapler cartridge is necessary to refill. |
| Remedy: | 1) Open finisher stapler door to refill cartridge and then close door. Self-Priming will be executed automatically if necessary. If stapler error or warning does not disappear, follow the instructions below : 2) Does finisher stapler cartridge refill box equip well? a) Make sure stapler refill box equip well into cartridge. (JC81-07408A) b) Make sure staples doesn’t jam near stapler head. 3) Does finisher stapler input sensor work well? a) Make sure finisher input sensor cable is connected well to the sensor connector. b) Make sure finisher input sensor cable is connected well to the main board connector. c) Replace the finisher stapler(JC81-07917A). d) Replace the finisher main board. |
| Error code: | M1-1113, M2-1121 |
| Display: | Paper jam in Tray 1. |
| Description: | Paper jam in Tray 1. |
| Causes: | Paper jam has occurred in tray1. |
| Remedy: | 1) Open the side cover and check if a foreign substance or paper is jammed inside the machine. 2) Remove tray1 and remove the jammed paper. 3) If this jam error occurs frequently, check the rollers of the pick up unit1. a) Remove tray1 and tray2. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93–00540A). 4) If the problem persists, check the pickup unit1 and feed sensor. a) Check if the pickup unit1 and feed sensor operate correctly. b) Check if the pickup unit1 harness is connected to the main board correctly. c) Check if the connector of the Guide-feed assembly is connected correctly. d) Check if the harness of pickup unit and feed sensor are connected correctly. 5) If the problem persists, check the pickup unit1. a) Remove the pickup unit and check the actuator and photo-sensor. b) Push the pickup-lever and check if it operates correctly. 6) If the problem persists, replace the pickup drive unit(JC93–00422A) or Pickup unit1(JC93-00511A). |
| Error code: | M1-1213, M2-1131 |
| Display: | Paper jam in Tray 2. |
| Description: | Paper jam in Tray 2. |
| Causes: | Paper jam has occurred in tray2. |
| Remedy: | 1) Open the side cover and check if a foreign substance or paper is jammed inside the machine. 2) Remove tray2 and remove the jammed paper. 3) If this jam error occurs frequently, check the rollers of the pick up unit1. a) Remove tray1 and tray2. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93–00540A). 4) If the problem persists, check the pickup unit2 and feed sensor. a) Check if the pickup unit2 and feed sensor operate correctly. b) Check if the pickup unit2 harness is connected to the main board correctly. c) Check if the connector of the Guide-feed assembly is connected correctly. d) Check if the harness of pickup unit and feed sensor are connected correctly. 5) If the problem persists, check the pickup unit2. a) Remove the pickup unit2 and check the actuator and photo-sensor. b) Push the pickup-lever and check if it operates correctly. 6) If the problem persists, replace the pickup drive unit2(JC93–00422A) or Pickup unit1(JC93-00512A). |
| Error code: | M1-1610 |
| Display: | Paper jam in MP Tray. |
| Description: | Paper Jamin MP tray |
| Causes: | The jammed paper has occurred in the MP tray. |
| Remedy: | 1) Remove the jammed paper. 2) If the jammed paper occurs continually, check the followings. a) Check if the pick up/forward/reverse roller are worn out or contaminated. Clean the contaminated part or replace it. b) Check if the actuator is assembled correctly. 3) If the pick up clutch is defective, replace it. 4) If the problem persists, replace the MP unit. |
| Error code: | M1-3122 |
| Display: | Tray 1 cassette is pulled out. Insert it properly. |
| Description: | Tray 1 cassette is pulled out. Insert it properly. |
| Causes: | Tray 1 is pulled out or the auto size sensor connector is not connected or broken. |
| Remedy: | 1) Remove and insert Tray1 correctly. 2) If Tray1 is not locked or pulled out without holding the locking lever, remove Tray1. 3) Check if foreign substance or paper is inside the space between Tray1,2. If so, please remove it. 4) If the problem persists, check that the auto size sensor is connected properly. 5) If the problem persists, replace the main board(JC92–02452A). |
| Error code: | M1-3222 |
| Display: | Tray 2 cassette is pulled out. Insert it properly. |
| Description: | Tray 2 cassette is pulled out. Insert it properly. |
| Causes: | Tray 2 is pulled out or the auto size sensor connector is not connected or broken. |
| Remedy: | 1) Remove and insert Tray2 correctly. 2) If Tray2 is not locked or pulled out without holding the locking lever, remove Tray2. 3) Check if foreign substance or paper is inside the space between Tray1,2. If so, please remove it. 4) If the problem persists, check that the auto size sensor is connected properly. 5) If the problem persists, replace the main board(JC92–02452A). |
| Error code: | M1-4111 |
| Display: | Input System Failure #M1-4111 : Pull Tray 1 out and insert it. |
| Description: | Input System Failure #M1–4111 : Pull Tray 1 out and insert it. |
| Causes: | The paper is not fed from tray1. |
| Remedy: | 1) Remove tray1 and re-install it. 2) If the problem persists, turn the machine off then on. 3) Enter SVC mode. Execute pickup motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100-0370) 4) If the pick up motor operation is abnormal, turn the machine off. 5) Remove the rear cover. 6) Check if the connection between pickup drive unit1 and main board is secure. 7) If the connection is OK, replace the pickup drive unit(JC93-00442A). 8) If the problem persists, check the pickup unit1. a) Check if the photo sensor in the pickup unit1 is defective. b) If the sensor(0604–001393) is defective, replace it. |
| Error code: | M1-4211 |
| Display: | Input System Failure #M1-4211 : Pull Tray 2 out and insert it. |
| Description: | Input System Failure #M1-4211 : Pull Tray 2 out and insert it. |
| Causes: | The paper is not fed from tray2. |
| Remedy: | 1) Remove tray2 and re-install it. 2) If the problem persists, turn the machine off then on. 3) Enter SVC mode. Execute pickup motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100-0380) 4) If the pick up motor operation is abnormal, turn the machine off. 5) Remove the rear cover. 6) Check if the connection between pickup drive unit2 and main board is secure. 7) If the connection is OK, replace the pickup drive unit(JC93-00442A). 8) If the problem persists, check the pickup unit2. a) Check if the photo sensor in the pickup unit2 is defective. b) If the sensor(0604–001393) is defective, replace it. |
| Error code: | M1-5111, M1-5112 |
| Display: | Paper is low in Tray 1. Load paper. Paper is empty in Tray 1. Load paper. |
| Description: | Paper is low in Tray 1. Load paper. Paper is empty in Tray 1. Load paper. |
| Causes: | Paper in the tray1 is less than 10%. / The photo sensor is defective. |
| Remedy: | 1) Remove tray 1. Load paper in the tray. And insert tray 1. 2) If paper is loaded but error message has not disappeared, check the following: a) Turn the machine off. Open the Side Cover. b) Remove Pick-Up Unit1. c) If the photo sensor is contaminated, clean it. d) If the photo sensor is defective, replace it(0604–001393). e) If the actuator is defective, replace it(JC66-03199A). |
| Error code: | M1-5211, M1-5212 |
| Display: | Paper is low in Tray 2. Load paper. Paper is empty in Tray 2. Load paper. |
| Description: | Paper is low in Tray 2. Load paper. Paper is empty in Tray 2. Load paper. |
| Causes: | Paper in the tray is less than 10% of specification. / The photo sensor is defective. |
| Remedy: | 1) Remove tray 2. Load paper in the tray, and insert the tray 2. 2) If paper is loaded but error message has not disappeared, check the following : a) Turn the machine off. Open the Side Cover. b) Remove Pick-Up Unit2. c) If the photo sensor is contaminated, clean it. d) If the photo sensor is defective, replace it(0604–001393). e) If the actuator is defective, replace it(JC66-03199A). |
| Error code: | M1-5612 |
| Display: | Paper is empty in MP Tray. Load paper. |
| Description: | Paper is empty in MP Tray. Load paper. |
| Causes: | Paper in the MP tray is less than 10%. / The photo sensor is defective. |
| Remedy: | 1) Load the paper in the MP tray. 2) If paper is loaded but error message has not disappeared, check the following : a) If the photo sensor is contaminated, clean it. b) If the photo sensor is defective, replace it(0604–001393). c) If the actuator is defective, replace it(JC66-03217A). |
| Error code: | M2-1124, M2-1125 |
| Display: | Paper jam inside of machine |
| Description: | Paper jam in tray 1 Paper jam inside of machine. |
| Causes: | Paper jam has occurred inside the machine. (Feed drive unit is defective / Feed 1 sensor is defective.) • M2–1124 : The leading edge of the paper has not reached the feed 1 sensor within the specified time. • M2-1125 : The paper has not left from the feed 1 sensor within the specified time. |
| Remedy: | 1) Open the side cover. Remove the jammed paper. 2) If jammed paper occurs continually, check the following. a) Enter SVC mode. Execute feed motor test. If the motor operation is normal, go to step d). b) Remove the rear cover. Check if the feed motor cable is connected correctly. c) If the connection is OK, replace the feed drive unit(JC93-00444A). d) If the feed motor operation is normal, check the feed 1 sensor. e) If the sensor operation is abnormal, check the harness. f) If the connection is OK, replace the feed sensor(0604-001381). |
| Error code: | M2-1134, M2-1135 |
| Display: | Paper jam inside of machine |
| Description: | Paper jam in tray 2 Paper jam in tray 1 |
| Causes: | Paper jam has occurred inside the machine. (Feed drive unit is defective / Feed 2 sensor is defective.) • M2–1134 : The leading edge of the paper has not reached the feed 2 sensor within the specified time. • M2-1135 : The paper has not left from the feed 2 sensor within the specified time. |
| Remedy: | 1) Open the side cover. Remove the jammed paper. 2) If jammed paper occurs continually, check the following. a) Enter SVC mode. Execute feed motor test. If the motor operation is normal, go to step d). b) Remove the rear cover. Check if the feed motor cable is connected correctly. c) If the connection is OK, replace the feed drive unit(JC93-00444A). d) If the feed motor operation is normal, check the feed 2 sensor. e) If the sensor operation is abnormal, check the harness. f) If the connection is OK, replace the feed sensor 2 (0604-001381). |
| Error code: | M2-1211, M2-1213, M2-1214 |
| Display: | Paper jam inside of machine. |
| Description: | Paper jam inside of machine. |
| Causes: | Paper jam has occurred inside the machine. (Regi. roller drive is defective / Regi. sensor is defective.) • M2–1211 : When the machine is warming-up, jammed paper inside machine is detected. • M2–1213 : The leading edge of the paper has not reached the regi. sensor within the specified time. • M2-1214 : The paper has not left from the regi. sensor within the specified time. |
| Remedy: | 1) Open the side cover. Remove the jammed paper. 2) If jammed paper occurs continually, check the following. a) Enter SVC mode. Execute Regi. motor test. If the motor operation is normal, go to step d). b) Remove the rear cover. Check if the Regi/MP motor cable is connected correctly. c) If the connection is OK, replace the Regi./MP drive unit(JC93-00443A). d) If the motor operation is normal, check the regi. sensor. e) If the sensor operation is abnormal, check the harness. f) If the connection is OK, replace the regi. sensor (0604-001381). |
| Error code: | M2-1331, M2-1333, M2-1334, M2-2111, M2-2113, M2-2114 |
| Display: | Paper jam inside of machine Paper jam at the top of duplex path |
| Description: | Paper jam has occurred inside the machine. |
| Remedy: | 1) Open the side cover. Remove jammed paper. 2) If the problem persists, check the following. a) Check the Regi sensor harness. If the harness is normal, replace the Regi. sensor (0604-001381). b) Check the sensors in the Side Unit. If the harness is normal, replace the defective sensor (0604-001393 ). |
| Error code: | M3-1411 |
| Display: | Paper jam in exit area. |
| Description: | Paper jam has occurred around the fuser unit.(At power-on / warm up , the machine detected paper jam in Inner tray Exit Sensor.) |
| Remedy: | • M3-1413 : The leading edge of the paper has not reached the feed 1 sensor within the specified time. • M3-1414 : The paper has not escaped from the feed 1 sensor within the specified time. 1) Open the side cover. Remove the jammed paper. 2) If the problem persists, check the following. a) Open the side cover. Check if the connector is connected properly. b) Remove the JOB-SEPARATOR. Check if the photo sensor is assembled correctly. c) Check if ACTUATOR-EXIT is assembled correctly. If the ACTUATOR-EXIT (JC66-02533A) is deformed or broken, replace it. d) If the photo sensor(0604-001393) is defective, replace it. |
| Error code: | M3-1413, M3-1414 |
| Display: | Paper jam in exit area. |
| Description: | Paper jam has occurred around the fuser unit.(Job separator connection is defective. / Actuator-Exit is defective.) |
| Causes: | Paper jam has occurred around the fuser unit.(Job separator connection is defective. / Actuator-Exit is defective.) |
| Remedy: | 1) Open the side cover. Remove the jammed paper. 2) If the problem persists, check the following. a) Open the side cover. Check if the connector is connected properly. b) Remove the JOB-SEPARATOR. Check if the photo sensor is assembled correctly. c) Check if ACTUATOR-EXIT is assembled correctly. If the ACTUATOR-EXIT (JC66-02533A) is deformed or broken, replace it. d) If the photo sensor(0604-001393) is defective, replace it. |
| Error code: | M3-2230, M3-2430 |
| Display: | Output tray is full. Remove printed media. |
| Description: | Output tray is full. Remove printed media. |
| Causes: | There is too much paper in output bin tray or inner tray. • M3-2230 : There is too much paper in output bin tray. • M3-2430 : There is too much paper in inner tray. |
| Remedy: | 1) Remove the paper from output bin tray or inner tray. 2) If this error ccurs continually, check the following. a) Check if the bin-full sensor and actuator is assembled correctly. b) Check if the bin-full sensor(0604–001393) is defective. |
| Error code: | S1-1113 |
| Display: | Video System Failure #S1-1113: Turn off then on. |
| Description: | Video System Failure #S1-1113: Turn off then on. |
| Causes: | The system has some problems due to CPU overheating. |
| Remedy: | 1) Turn the machine off. 2) Wait until the machine is cool, and then turn the machine on. 3) If the problem persists, turn the machine off again. 4) Remove the rear cover. 5) Replace the main board(JC92-02742A). 6) Assemble the rear cover. Turn the machine on. |
| Error code: | S1-1114 |
| Display: | Video System Failure #S1-1114: Turn off then on. |
| Description: | Video System Failure #S1-1114: Turn off then on. |
| Causes: | CPU fan is not working |
| Remedy: | 1) Turn the machine off. 2) Wait until the machine is cool. And then turn the machine on. 3) If the problem persists, turn the machine off again. 4) Remove the rear cover. 5) Replace the main board(JC92-02746A). NOTE Insert the MSOK to the new main board. 6) Assemble the rear cover. Turn the machine on. |
| Error code: | S1-1313 |
| Display: | The clock became initial time. Set a time again. |
| Description: | The clock became initial time. Set a time again. |
| Causes: | Saved time is invalid |
| Remedy: | 1) Set up the time and reboot the machine. a) Select “Machine Setup” on touch screen. b) Select “General Setting”. c) Select “Date and Time” and set the time. 2) If the problem persists, check the following. a) Remove the rear cover. b) Remove the fax holder from the main board. c) Measure the voltage of the battery. If the battery is normal, the measured value is over 3V. 3) If the battery is normal, replace the main board(JC92-02742A). |
| Error code: | S1-1411, S1-1413 |
| Display: | Video System Failure #S1-1411: Turn off then on. Video System Failure #S1-1413: Turn off then on. |
| Description: | SPGPv4-Chip is not working. |
| Causes: | Video chip in main board is defective. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, replace the main board(JC92-02452A). |
| Error code: | S1-2111 |
| Display: | Video System Failure #S1-2111: Turn off then on. |
| Description: | Video System Failure #S1-2111: Turn off then on. |
| Causes: | The machine can’t detect memory during booting. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, turn the machine off again. 3) Remove the rear cover. 4) Replace the main board(JC92-02742A). NOTE Insert the MSOK to the new main board. 5) Assemble the rear cover. Turn the machine on. |
| Error code: | S1-2411, S1-2421, S1-2422 |
| Display: | HDD System Failure #: Turn off then on. |
| Description: | HDD System Failure #S1-2411: Turn off then on. HDD System Failure #S1-2421: Turn off then on. HDD System Failure #S1-2422: Turn off then on. |
| Causes: | Hard Disk is not installed in the machine. / Hard Disk is defective. |
| Remedy: | 1) Check if the HDD is installed correctly. a) Remove the rear cover. b) Check if the HDD cable is connected correctly. 2) If the problem persists, replace the HDD(JC59–00035A). |
| Error code: | S1-2510, S1-2511, S1-2521, S1-2523, S1-2540 |
| Display: | MSOK System Failure: Turn off then on. MSOK Failure: #. Call for service. PPM data is incorrect. Call for service & change MSOK. |
| Description: | Communication error between data storage device of MSOK and main board has occurred. |
| Remedy: | 1) Check if the MSOK is inserted correctly. Remove and reinstall it.. a) Remove the reat cover b) Check if the MSOK is correctly connected. c) Check if the connecter and harness are correctly plugged. 2) If the problem persists, replace the main board(JC92-02452A). |
| Error code: | S1-4111 |
| Display: | Video System Failure #S1-4111: Turn off then on. |
| Description: | Video System Failure #S1-4111: Turn off then on. |
| Causes: | The main board can’t send the data through the network channel. |
| Remedy: | 1) Check if the green LED of the network port is on. 2) If not, unplug and reconnect the network cable. 3) If the problem persists, replace the main board(JC92-02742A). |
| Error code: | S1-4311 |
| Display: | Video System Failure #S1-4311: Turn off then on. |
| Description: | Video System Failure #S1-4311: Turn off then on. |
| Causes: | The USB device chip is defective. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, turn the machine off again. 3) Replace the OPE hub board. 4) Turn the machine on. |
| Error code: | S1-5521 |
| Display: | FDI device is not installed. Install the device. |
| Description: | The machine can’t detect the FDI device. |
| Causes: | FDI device was removed. |
| Remedy: | 1) Install the FDI device. 2) If the FDI device is already installed, update the firmware for main board. 3) Check the connection between FDI device and main board. a) Remove the rear cover. b) Check the connection between FDI unit and mainboard connection. 4) If FDI unit has problem, replace FDI unit(CLX-KIT10). 5) If the problem persists, replace the main board(JC92-02452A). |
| Error code: | S2-1211 |
| Display: | Engine System Failure #S2-1211: Turn off then on. |
| Description: | Power chip on main board is defective. |
| Causes: | Communication error between the ASIC on main board and microcontroller IC has occurred. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, replace the main board. |
| Error code: | S2-2311 |
| Display: | Engine System Failure #S2-2311: Turn off then on. |
| Description: | EEPROM on main board is defective |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, replace the main board. |
| Error code: | S2-4210 |
| Display: | Front door is open. Close it. |
| Description: | Front door is open. Close it. |
| Causes: | Front cover or Side cover is opened. |
| Remedy: | 1) Close the front cover correctly. 2) Check if the cover open sensor connector is connected properly. Reconnect it. 3) If the sensor is defective, replace it. |
| Error code: | S2-4410 |
| Display: | Right door is open. Close it. |
| Description: | Right door is open. Close it. |
| Causes: | Front cover or Side cover is opened. |
| Remedy: | 1) Close the side cover correctly. 2) Check if the cover open sensor connector is connected properly. Reconnect it. 3) If the sensor is defective, replace it. |
| Error code: | S3-3111 |
| Display: | Scan System Failure #S3-3111: Turn off then on. |
| Description: | Error occurs at Scanner connection |
| Remedy: | 1) Turn the power off then turn on. 2) If the problem persists, remove the DADF unit. 3) Open the scan rear cover. 4) Check if the connection onthe Scanner board. 5) If there is no problem, replace the Main board(JC92-02452A) or Scan joint board(JC92-02447A). |
| Error code: | S3-3121 |
| Display: | Scanner Locked |
| Description: | CIS unit in the scanner does not move. |
| Causes: | Scanner lock error has occurred. CIS does not move. |
| Remedy: | 1) Check if the CIS unit moves when turning the machine off then on. 2) Check if the CIS cable is connected correctly. Reconnect it. 3) If the CIS unit is defective, replace it. 4) Check if there is any defective part in the scanner. Find and replace it. 5) If the problem persists, replace the main board. |
| Error code: | S3-3211, S3-3213, S3-3214, S3-3215, S3-3216, S3-3217 |
| Display: | Scan System Failure #: Turn off then on. |
| Description: | DADF is not connected communication error occurs with CIP6 board. |
| Remedy: | 1) Turn the power off then turn on. 2) If the problem persists, check the DADF unit connection. 3) If the problem persists, remove the DADF unit to find the defects. 4) Remove the DADF rear cover. Check if the connector on DADF board is connected correctly. 5) If the connection is OK, replace the DADF board(JC92-02446A). |
| Error code: | S5-3111 |
| Display: | UI System Failure #S5-3111:Turn off then on. |
| Description: | UI System Failure #S5-3111:Turn off then on. |
| Causes: | Main board has critical problem which make its lockup or USB connection between main board and OPE has some problem. |
| Remedy: | 1) Turn off and turn on. And check if the problem disappears. a) If yes, go to step 2)-a). b) If no, go to step 2)-b). 2) Check the following procedure. a) Print the Error Information Report. . Service Mode - General - Print Reports - Error Information . Check the error code which is printed on the report. - If S5-3111 has occurred, go to step 4). - If S5-3112 has occurred, go to step 5)-c). - If S5-3113 has occurred, go to step 5)-d). b) Enter into System Recovery Mode. . How to enter System Recovery Mode : Turn on the machine with side cover open and power button on OPE is pressed state. . Check if entering System Recovery Mode is possible or not. - If entering System Recovery Mode is successful, go to step 3). - If entering System Recovery Mode fails, go to step 5)-d). 3) Execute the System Recovery. • Insert USB memory stick which has recovery one rom and execute recovery(HDD format). • Check if the problem disappears after system recovery(format complete). - If yes, go to step 4). - If no, go to step 5)-c). 4) Execute the firmware update. • Check if the problem disappears after one rom update. - If the problem disappears, go to step 5)-a). - If the problem happens sometimes, go to step 5)-b). 5) Check the following procedure. a) No more action is required because machine is recovered from S5-3111 error state. Please monitor the machine if S5-3111 happens again. b) Detailed analysis is required. Please capture the log and send it to development team in HQ. c) It seems that HDD or main board has some problem. Please replace HDD or main board with new one and check if the problem disappears. d) It seems that there is some critical issue in the USB connection between main board and OPE. Please try below steps. i) If WiFi module is installed, replace WiFi module with new one. ii) Check USB cable state between main board and OPE. iii) Replace the main board with new one. iv) Replace the OPE board with new one. |
| Error code: | S6-3122 |
| Display: | Network cable is disconnected. Check it. |
| Description: | Network cable is disconnected. Check it. |
| Causes: | Network cable is disconnected. |
| Remedy: | 1) Check if the green LED of the network port is on. 2) If not, unplug and reconnect the network cable. 3) If the problem persists, replace the main board(JC92-02742A). |
| Error code: | S6-3123 |
| Display: | This IP address conflicts with that of other system. Check it. |
| Description: | This IP address conflicts with that of other system. Check it. |
| Causes: | Network has some problem. (IP address conflicts with that of other system. / Communication error / There is no response when checking the ping test.) |
| Remedy: | Change the machine’s IP address. • Execute the Samsung Easy Printer Manager program. (Device setting > Network > IP address). Change the IP address. • In case of DHCP or Bootp, reboot the machine to receive a new IP address. |
| Error code: | S6-3128 |
| Display: | 802.1x authentication failed. Please Contact the System Administrator |
| Description: | There is no response when checking the ping test. ID or Password is incorrect. |
| Causes: | Network error. ( A authenticator(eg switch) rejected authentication. / There is no response when checking the ping test.) |
| Remedy: | 1) Change the IP adredd (Machine Setup > Network Setting > Login > TCP/IP > Select the network protocol > IP Setting 2) Inut the Network Login ID and Password correctly. |
| Error code: | S7-2110 |
| Display: | Fuser Failure: #S7-2110. Turn off then on |
| Description: | Fuser Failure: #S7-2110. Turn off then on |
| Causes: | Heater control relay is abnormal. |
| Remedy: | 1) Turn the machine off. Re-install the fuser unit, then turn the machine on. 2) If the problem persists, replace the Fuser unit(110V : JC91-01158A, 220V : JC91-01157A). |
| Error code: | U1-2113, U1-2119 |
| Display: | Fuser Unit Failure: #U1-2113. Fuser Unit Failure: #U1-2119. |
| Description: | Fuser Unit Failure: #U1-2113. Fuser Unit Failure: #U1-2119. |
| Causes: | The thermistor can’t measure temperature. The hear-roller will not heat-up. |
| Remedy: | • U1–2113 : Error occurs at non-contact type Thermistor • U1–2119 : Error occurs at contact type Thermistor 1) Turn the machine off. Re-install the fuser unit, then turn the machine on. 2) Remove the fuser unit. After opening the jam cover, check if jammed or wrapped paper is in the fuser unit. 3) If the problem persists, check the following: a) Check if the Halogen lamp (110V : 4713–001632 / 220V : 4713–001633) is broken or disconnected. b) Check if the AC connection of the Halogen lamp is disconnected or contaminated. c) Check if the thermistat(4712-001098) is disconnected. d) Check if the contact type thermistor(1404–001567) or Non-contact type thermistor(1404–001453)is broken. 4) If the problem persists, replace the Fuser unit(220V : JC91–01163A / 110V : JC91–01164A). 5) If the problem persists, replace the main board(JC92–02746A) or FDB board(220V : JC44-00211A, 110V : JC44-0021A)or SMPS(220V : JC44-00100C, 110V : JC44-00093C) |
| Error code: | U1-2115 |
| Display: | Fuser Unit Failure: #U1-2115. Turn off then on. |
| Description: | Fuser Unit Failure: #U1-2115. Turn off then on. |
| Causes: | The pressure control unit(Cam unit)of the fuser is abnormal. |
| Remedy: | 1) Turn the machine off then open the side cover. 2) Remove and re-install the fuser unit, then turn the machine on. 3) If the problem persists, check the following : a) When the side-cover closes, check if the operation sound of the pressure control unit occurs. b) Check if the parts of the pressure control unit are abnormal. - Check if the shape of the CAM-REAR(JC66-03299A)) is broken. - Check if there are abnormal parts of the pressure control unit. c) Check if the fuser-motor is abnormal via SVC mode. 4) If the problem persists, replace the Fuser unit(110V : JC91-01158A, 220V : JC91-01157A). 5) If the problem persists, replace the pressure control unit or cam-motor or Main board(JC92-02742A). |
| Error code: | U1-2132, U1-2135 |
| Display: | Fuser Unit Failure: #U1-2132. Fuser Unit Failure: #U1-2135. |
| Description: | Fuser Unit Failure: #U1-2132. Fuser Unit Failure: #U1-2135. |
| Causes: | Temperature of the fuser rises abnormally. |
| Remedy: | • U1–2132 : Error occurs at non-contact type Thermistor • U1–2135 : Error occurs at contact type Thermistor 1) Turn the machine off. Re-install the fuser unit, then turn the machine on. 2) Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?) 3) Remove the fuser unit. After opening the jam cover, check jammed or wrapped paper is in the fuser unit. 4) If the problem persists, Check the following: a) Check if the Halogen lamp (110V : 4713–001632 / 220V : 4713–001633) is broken or disconnected. b) Check if the AC connection of the Halogen lamp is disconnected or contaminated. c) Check if the thermistat(4712-001098) is disconnected. d) Check if the contact type thermistor(1404–001567) or Non-contact type thermistor(1404–001453) is broken. 5) If the problem persists, replace the Fuser unit(220V : JC91–01163A / 110V : JC91–01164A). 6) If the problem persists, replace the main board(JC92–02746A) or FDB board(220V : JC44-00211A, 110V : JC44-0021A)or SMPS(220V : JC44-00100C, 110V : JC44-00093C) |
| Error code: | U1-2141, U1-2142 |
| Display: | Fuser Unit Failure: #U1-2141. Fuser Unit Failure: #U1-2142. |
| Description: | Fuser Unit Failure: #U1-2141. Fuser Unit Failure: #U1-2142 |
| Causes: | Temperature of the thermistor is higher than the maximum allowable temperature. |
| Remedy: | • U1–2141 : Error occurs at non-contact type Thermistor • U1–2142 : Error occurs at contact type Thermistor 1) Turn the machine off. Re-install the fuser unit, then turn the machine on. 2) Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?) 3) Remove the fuser unit. After opening the jam cover, check if jammed or wrapped paper is in the fuser unit. 4) If the problem persists, Check the following: a) Check if the contact type thermistor(1404–001567) or Non-contact type thermistor(1404–001453) is broken. 5) If the problem persists, replace the Fuser unit(220V : JC91–01163A / 110V : JC91–01164A). 6) If the problem persists, replace the main board(JC92–02746A) or FDB board(220V : JC44-00211A, 110V : JC44-0021A)or SMPS(220V : JC44-00100C, 110V : JC44-00093C) |
| Error code: | U1-2316, U1-2317 |
| Display: | Fuser Unit Failure: #U1-2316. Fuser Unit Failure: #U1-2317. |
| Description: | Fuser Unit Failure: #U1-2316. Fuser Unit Failure: #U1-2317 |
| Causes: | Temperature of the fuser changes abnormally |
| Remedy: | • U1–2316 : Error occurs at non-contact type Thermistor • U1–2317 : Error occurs at contact type Thermistor 1) Turn the machine off. Re-install the fuser unit, then turn the machine on. 2) Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?) 3) If the problem persists, Check the following: a) Check if the Halogen lamp (110V : 4713–001632 / 220V : 4713–001633) is broken or disconnected. b) Check if the AC connection of the Halogen lamp is disconnected or contaminated. c) Check if the thermistat(4712-001098) is disconnected. d) Check if the contact type thermistor(1404–001567) or Non-contact type thermistor(1404–001453) is broken. 4) If the problem persists, replace the Fuser unit(220V : JC91–01163A / 110V : JC91–01164A). 5) If the problem persists, replace the main board(JC92–02746A) or FDB board(220V : JC44-00211A, 110V : JC44-0021A)or SMPS(220V : JC44-00100C, 110V : JC44-00093C) |
| Error code: | U1-2335, U1-233A |
| Display: | Fuser Unit Failure: #U1-2335. Fuser Unit Failure: #U1-233A. |
| Description: | Fuser Unit Failure: #U1-2335. Fuser Unit Failure: #U1-233A. |
| Causes: | Temperature of the thermistor is abnormally low. |
| Remedy: | • U1–2335 : Error occurs at non-contact type Thermistor • U1–233A : Error occurs at contact type Thermistor 1) Turn the machine off. Re-install the fuser uni, then turn the machine on. 2) Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?) 3) Remove the fuser unit. After opening the jam cover, check if jammed or wrapped paper is in the fuser unit. 4) If the problem persists, Check the follows. a) Check if the Halogen lamp (110V : 4713–001632 / 220V : 4713–001633) is broken or disconnected. b) Check if the AC connection of the Halogen lamp is disconnected or contaminated. c) Check if the thermistat(4712-001098) is disconnected. d) Check if the contact type thermistor(1404–001567)or Non-contact type thermistor(1404–001453) is broken. 5) If the problem persists, replace the Fuser unit(220V : JC91–01163A / 110V : JC91–01164A). 6) If the problem persists, replace the main board(JC92–02746A) or FDB board(220V : JC44-00211A, 110V : JC44-0021A)or SMPS(220V : JC44-00100C, 110V : JC44-00093C) |
| Error code: | U1-2337, U1-233D |
| Display: | Fuser Unit Failure: #U1-2337. Fuser Unit Failure: #U1-233D |
| Description: | Fuser Unit Failure: #U1-2337. Fuser Unit Failure: #U1-233D. |
| Causes: | When the fuser warms-up, the temperature of the thermistor is abnormally low. |
| Remedy: | • U1–2337 : Error occurs at non-contact type Thermistor • U1–233D : Error occurs at contact type Thermistor 1) Turn the machine off. Re-install the fuser unit, then turn the machine on. 2) Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?) 3) Remove the fuser unit. After opening the jam cover, check if jammed or wrapped paper is in the fuser unit. 4) If the problem persists, Check the follows. a) Check if the Halogen lamp (110V : 4713–001632 / 220V : 4713–001633) is broken or disconnected. b) Check if the AC connection of the Halogen lamp is disconnected or contaminated. c) Check if the thermistat(4712-001098) is disconnected. d) Check if the contact type thermistor(1404–001567)or Non-contact type thermistor(1404–001453) is broken. 5) If the problem persists, replace the Fuser unit(220V : JC91–01163A / 110V : JC91–01164A). 6) If the problem persists, replace the main board(JC92–02746A) or FDB board(220V : JC44-00211A, 110V : JC44-0021A)or SMPS(220V : JC44-00100C, 110V : JC44-00093C) |
| Error code: | U2-1111, U2-1112, U2-1113, U2-1114 |
| Display: | LSU Failure: #. Turn off then on. |
| Description: | LSU motor does not operate of it operates abnormally. Motor ready signal is abnormal. |
| Remedy: | 1) Turn the machine off then on. Check for the LSU motor operation sound during warm-up. 2) Print a Demo page and check the printout is normal. 3) If the problem persists, check the following: • If the LSU motor makes a sound, a) By SVC mode, Check if the motor ready signal is occurred. (Diagnostics > Engine Diagnostics > Engine Test Routines > 110-0000) b) If not, open the side-cover and replace the LSU(JC97-04017A) • If the LSU motor does not make a sound, a) Unplug and reconnect the LSU flat cable connecting the LSU. Then check the operation sound of LSU. b) Unplug and reconnect the LSU flat cable on main board. Then check the operation sound of LSU. c) If the LSU flat cable is defective, replace FFC(JC39-01657A) d) If the LSU cable is OK, replace the LSU(JC97-04017A) |
| Error code: | U3-3113, U3-3211, U3-3212, U3-3213, U3-3214, U3-3312, U3-3314 |
| Display: | Original paper jam inside of scanner |
| Description: | Jam has occurred inside the DADF unit. |
| Remedy: | 1) Open the DADF cover. If there is jammed paper, remove it. 2) If this error occurs continually, check the DADF regi. sensor(0604-001393) and regi actuator(JC66-03148A). If their operation is abnormal, replace a defective part. 3) If the regi sensor is OK, check the scan sensor(0604-001393) and scan actuator(JC66-03210A). If their operation is abnormal, replace a defective part. 4) Check if the regi. clutch operates normally. Check if the clutch cable is connected correctly. If the clutch(JC47-00033A) is defective, replace it. |
| Error code: | U3-3311, U3-3313 |
| Display: | Original paper jam inside of scanner. |
| Description: | Jam has occurred inside the DADF unit. |
| Remedy: | 1) Open the DADF cover. If there is jammed paper, remove it. 2) If this error occurs continually, check the following: a) Check if the scan actuator(JC66-03210A) operates normally. b) Check if the scan sensor cable is connected correctly. c) If the connection is OK, replace the scan sensor(0604-001393). |
| Error code: | U3-3411, U3-3413, U3-3414 |
| Display: | Original paper jam inside of scanner. |
| Description: | Jam has occurred inside the DADF unit. |
| Causes: | Original jam has occurred around the scan in roller and regi roller. |
| Remedy: | 1) Open the DADF cover. If there is jammed paper, remove it. 2) If this error occurs continually, check the following: a) Check if the Regi. actuator(JC66-03148A) operates normally. b) Check if the Regi. sensor cable is connected correctly. c) If the connection is OK, replace the Regi. sensor(0604-001393). |
| Error code: | U3-3711, U3-3713, U3-3714 |
| Display: | Original paper jam in the exit area of scanner |
| Description: | Original jam has occurred inside the DADF unit. |
| Remedy: | 1) Open the DADF cover. If there is a jammed paper, remove it. 2) If this error occurs continually, check the followings. a) Check if the exit actuator(JC66-03184A) operates normally. b) Check if the exit sensor cable is connected correctly. c) If the connection is OK, replace the exit sensor(0604-001393). |
| Error code: | U3-4210 |
| Display: | Top door of scanner is open. |
| Description: | Top door of scanner is open. |
| Causes: | DSDF cover is open. |
| Remedy: | 1) Open and close the DSDF cover. Check if the error message is disappeared. 2) If the problem persists, check the cover open sensor. a) Open the DSDF cover. Remove the spring. b) Remove 4 screws. c) Check if the sensor connector is connected correctly. If the sensor is defective, replace it(0604–001393). |
