Samsung Xpress M2620DW
Рейтинг
Модули
COVER
Frame Main-Left
COVER-TOP
MAIN
CASSETTE
Fuser
FRAME-MAIN-EXIT
Fuser-Lower
Frame Base-Pick Up
FRAME-PAPER PATH
FRAME MAIN RIGHT
FRAME
Детали COVER
| Деталь: | COVER-LEFT, SL-M2820DW,SEC |
| Парткод: | JC95-01850A |
| Деталь: | COVER-RIGHT, SL-M2820DW,SEC |
| Парткод: | JC95-01851A |
| Деталь: | COVER-REAR, SL-M2620,SEC |
| Парткод: | JC95-01852D |
| Деталь: | COVER-FRONT, SL-M2820DW,SEC |
| Парткод: | JC95-01853A |
| Деталь: | COVER-REAR, SL-M2620,HIPS,2.0T,SPLIT GRAY |
| Парткод: | JC63-04212D |
| Деталь: | COVER-FACE UP, SL-M2820DW,HIPS,2.5T,276.6 |
| Парткод: | JC63-03109F |
| Деталь: | GUIDE-CHANGE_DUP, ML-2950ND,PC+GF,1.2,223 |
| Парткод: | JC61-04377A |
| Деталь: | SPRING-ETC, SUS304,0.5,7.1,7.6,RIGHT |
| Парткод: | 6107-002996 |
| Деталь: | COVER-MANUAL, SL-M2820DW,HIPS,2.0T,250.2, |
| Парткод: | JC63-03127F |
| Деталь: | COVER-FRONT, SL-M2820DW,HIPS,2.5T,SPLIT G |
| Парткод: | JC63-04206A |
| Деталь: | BRACKET-SUPPORT REAR, CLP-325,SECC,1.0,11 |
| Парткод: | JC61-04109A |
| Деталь: | BUTTON-FRONT, SL-M2820DW,HIPS,BR0011 |
| Парткод: | JC64-00904A |
| Деталь: | GUIDE-CST_REAR_L, ML-2950ND,ABS,HF-0660I, |
| Парткод: | JC61-04368A |
| Деталь: | MOTOR BLDC-TYPE1, 3002500rpm,DC 24V,25W, |
| Парткод: | JC31-00156A |
| Деталь: | GEAR-FUSER DR OUT, ML-2950ND,POM,1.0,z29, |
| Парткод: | JC66-03016A |
| Цена: | 250 ₽ |
| Деталь: | GUIDE-KNOCK_UP_L, ML-2950ND,ABS,HF-0660I, |
| Парткод: | JC61-04370A |
| Деталь: | PLATE-GUIDE_DEVE_L, ML-2950ND,POM,24.8,38 |
| Парткод: | JC61-04381A |
| Деталь: | FRAME-LEFT, ML-2950ND,EGI-SECC,0.8 |
| Парткод: | JC61-04360A |
| Деталь: | BUSH-SHAFT_MP, ML-2950ND,POM,6.0,9.0,5,WH |
| Парткод: | JC61-04405A |
| Деталь: | GEAR-IDLE FEED2, ML-2950ND,POM,0.5,z24,NA |
| Парткод: | JC66-03018A |
| Деталь: | GEAR-IDLE FEED3, ML-2950ND,POM,0.5/0.8,z3 |
| Парткод: | JC66-03019A |
| Деталь: | BAND, ML-2950ND,PC+GF20%,BLACK,3025PG20 |
| Парткод: | JC61-04387A |
| Деталь: | GEAR-IDLE FEED, ML-2950ND,POM,0.5,z94,WHT |
| Парткод: | JC66-03020A |
| Деталь: | BUSH-FUSER SWING, ML-2950ND,POM,21.4,36,N |
| Парткод: | JC61-04412A |
| Деталь: | GEAR-HUB CLUTCH, POM,10.4,10.4,11.3,NW-02 |
| Парткод: | JC66-00340A |
| Цена: | 220 ₽ |
| Деталь: | GEAR-RDCN FEED1, ML-2950ND,POM,0.5,z101/z |
| Парткод: | JC66-03024A |
| Деталь: | GEAR-RDCN FEED2, ML-2950ND,POM,0.5/0.6,z3 |
| Парткод: | JC66-03025A |
| Деталь: | COUPLER-CAM, ML-2950ND,POM,5,20.32,F20-02 |
| Парткод: | JC67-00538A |
| Деталь: | LEVER-COUPLING A, ML-2950ND,POM,Natural,L |
| Парткод: | JC66-03034A |
| Деталь: | DRIVE-MAIN, ML-2950ND |
| Парткод: | JC93-00417A |
| Цена: | 1 400 ₽ |
| Деталь: | COVER-HARNESS, ML-2950ND,ABS,77.57,120.38 |
| Парткод: | JC63-03123A |
| Деталь: | COVER-TOP, SL-M2620,SEC |
| Парткод: | JC95-01854J |
| Деталь: | STACKER-MAIN, CLP-415N,ABS,2.2,98,76.3,HB |
| Парткод: | JC61-05513A |
| Деталь: | COVER-TOP, SL-M2620,HIPS,2.5T,SPLIT BROWN |
| Парткод: | JC63-04208J |
| Деталь: | BRUSH-ANTISTATIC, ML-2950ND,THUNDERON FIB |
| Парткод: | JC67-00552A |
| Деталь: | STACKER-RX_PAPER, ML-2855ND,ABS+PC,26.7,3 |
| Парткод: | JC61-03321A |
| Деталь: | STACKER-BIN_FULL, ML-2950ND,ABS+PC,46.56, |
| Парткод: | JC61-04415D |
| Деталь: | SPRING-ETC, SUS304,0.5,57.4,6.6,5,6 |
| Парткод: | 6107-002926 |
| Деталь: | COVER-EXIT, SL-M2820DW,ABS,2.0,SPLIT BROW |
| Парткод: | JC63-04209A |
| Деталь: | PBA OPE, SL-M2825ND,SEC |
| Парткод: | JC92-02609B |
| Деталь: | HOLDER-KEY, SL-M2820DW,ABS,2.0,SPLIT BROW |
| Парткод: | JC61-06025A |
| Деталь: | HOLDER-SHAFT, ML-1660,POM,21.8,BLACK,F25- |
| Парткод: | JC61-03973A |
| Деталь: | FUSER, ML-2950ND,SEC,WORLD,220V |
| Парткод: | JC91-01034B |
| Цена: | 5 800 ₽ |
| Деталь: | CASSETTE, ML-2975DW,SEE |
| Парткод: | JC90-01224A |
| Цена: | 3 700 ₽ |
| Деталь: | COVER-TOP, SL-M2620,SEC |
| Парткод: | JC95-01854J |
| Деталь: | COVER, SL-M2620,SEC |
| Парткод: | JC95-01849D |
| Деталь: | LEVER-COUPLING B, ML-2950ND,POM,WHT,LINK/ |
| Парткод: | JC66-03035A |
| Деталь: | FRAME, SL-2620,SEC,SEE |
| Парткод: | JC93-00838E |
| Деталь: | PBA-MAIN, SL-M2620/ETS,SEC,4L,MAIN PBA,13 |
| Парткод: | JC92-02616L |
| Деталь: | CASSETTE, ML-2975DW,SEE |
| Парткод: | JC90-01224A |
| Цена: | 3 700 ₽ |
| Деталь: | PLATE-KNOCK_UP, EGI-SECC,0.8,257.8,173.1, |
| Парткод: | JC61-04379A |
| Деталь: | RPR-PAD CASSETTE, ML-1510,Urethan Sponge, |
| Парткод: | JC73-00141A |
| Цена: | 80 ₽ |
| Деталь: | SPRING-CS, SUS304,0.8,18.2,64.0,17.4,19.0 |
| Парткод: | 6107-002935 |
| Деталь: | GEAR-PINION, ML-2950ND,POM,0.5,32,3.9,WHI |
| Парткод: | JC66-03004A |
| Деталь: | COVER-CASSETTE, ML-2975DW,ABS,1.5,67.7,45 |
| Парткод: | JC63-03124C |
| Деталь: | CASSETTE SUB-RETARD, ML-2975DW |
| Парткод: | JC90-01107B |
| Цена: | 900 ₽ |
| Деталь: | GUIDE-ADJUST_L, ML-2950ND,ABS,2.0,135.5,9 |
| Парткод: | JC61-04397A |
| Деталь: | LOCKER-PLATE, ML-2950ND,POM,WHITE,KEPITAL |
| Парткод: | JC64-00657A |
| Деталь: | SPRING ETC-LOCKER,PLATE, SF6000,SUS304WPB |
| Парткод: | JG61-70531A |
| Деталь: | LOCKER-CASSETTE, ML-3710,POM,NTR,41.5, 15 |
| Парткод: | JC64-00610A |
| Деталь: | SPRING-CS, SUS304,0.5,4.3,17.0,3.8,4.8,19 |
| Парткод: | 6107-002936 |
| Деталь: | CASSETTE-GUIDE RIGHT, ML-2955ND,SEE |
| Парткод: | JC90-01106A |
| Деталь: | CASSETTE SUB-HANDLE, ML-2975DW,SEE |
| Парткод: | JC90-01225A |
| Деталь: | CASSETTE-GUIDE REAR, ML-4210ND,SEC |
| Парткод: | JC90-01105C |
| Деталь: | FRAME-CASSETTE, ML-2975DW,HIPS,SPLIT GRAY |
| Парткод: | JC61-04380C |
| Деталь: | ROLLER-MAT_RETARD, ML-2955ND,EPDM,16,23.5 |
| Парткод: | JC66-02939C |
| Деталь: | HANDLE-CASSETTE, SL-M2820DW,ABS,2.0,HF-06 |
| Парткод: | JC64-00903A |
| Деталь: | INDICATOR-PAPER, ML-2975DW,HIPS,SPLIT GRA |
| Парткод: | JC64-00656D |
| Деталь: | FUSER, ML-2950ND,SEC,WORLD,220V |
| Парткод: | JC91-01034B |
| Цена: | 5 800 ₽ |
| Деталь: | FUSER-UPPER, ML-2950ND,SEC,WORLD |
| Парткод: | JC91-01035A |
| Деталь: | LAMP-HALOGEN, 230V,850W |
| Парткод: | 4713-001565 |
| Цена: | 1 200 ₽ |
| Деталь: | FUSER-LOWER, ML-2950ND,SEC,WORLD |
| Парткод: | JC91-01036A |
| Деталь: | CAP-LAMP_R, ML-2950ND,PET+GF,BLACK |
| Парткод: | JC67-00533A |
| Деталь: | FUSER-DRIVE EXIT, ML-2950ND,SEC,WORLD |
| Парткод: | JC91-01038A |
| Деталь: | CAP-LAMP_L, ML-2950ND,PET+GF,BLACK |
| Парткод: | JC67-00532A |
| Деталь: | STOPPER-GEAR_FUSER, ML-1660,Rhodia 2413GW |
| Парткод: | JC61-03968A |
| Деталь: | FUSER-REAR, ML-2950ND,SEC,WORLD,220V |
| Парткод: | JC91-01037B |
| Деталь: | HARNESS-FUSER JOINT, ML-3710,1 pin,100mm, |
| Парткод: | JC39-01487A |
| Деталь: | THERMOSTAT, AC125/250V,195+-5100 |
| Парткод: | 4712-001091 |
| Деталь: | THERMISTOR-NTC ASSY, 7Kohm,3370K,0.3mW/C, |
| Парткод: | 1404-001447 |
| Деталь: | COVER-FUSER, ML-2950ND,PET+GF,290.98,BLAC |
| Парткод: | JC63-03132A |
| Деталь: | PMO-ROLLER_EXIT, HQ_LOAD_PD10,POM |
| Парткод: | JC72-40361A |
| Деталь: | SPRING ETC-FUSER EXIT, ML-7000,SUS304-WPB |
| Парткод: | JC61-70976A |
| Деталь: | GUIDE-CLAW, ML-3471ND,PPS,13.20,15.79,BRO |
| Парткод: | JC61-02154A |
| Цена: | 500 ₽ |
| Деталь: | SPRING-ETC, SWPB,0.35,0.29,3.2,3.78 |
| Парткод: | 6107-002817 |
| Цена: | 1 200 ₽ |
| Деталь: | ROLLER-SILICON_EXIT, ML-3700,SILICON |
| Парткод: | JC66-02955A |
| Деталь: | SHAFT-EXIT_F/UP, ML-2950ND,PET+GF,204.2,1 |
| Парткод: | JC66-02990A |
| Деталь: | GEAR-EXIT_Z19, ML-3700ND,POM,1,19,NTR,21. |
| Парткод: | JC66-02777A |
| Деталь: | BUSH-TX, ML-3471ND/SEE,POM(M90-44),2.5,16 |
| Парткод: | JC61-02158A |
| Деталь: | GUIDE-REAR, ML-2950ND,PC,2.0T,237.31,BLAC |
| Парткод: | JC61-04363A |
| Деталь: | ROLLER-IDLE_EXIT, ML-2851ND,POM |
| Парткод: | JC66-01661A |
| Деталь: | SPRING-ETC, SUS304,PI0.2,ID4.5,OD4.9,8.1, |
| Парткод: | 6107-002670 |
| Деталь: | HOLDER-ACTUATOR, ML-3700,TEFLON,2.0,17.4 |
| Парткод: | JC61-04133A |
| Деталь: | ACTUATOR-EXIT, ML-2950ND,PA66,2.0T,Black |
| Парткод: | JC66-02991A |
| Деталь: | FRAME MAIN-EXIT, SL-2820DW,SEC |
| Парткод: | JC93-00410F |
| Деталь: | PHOTO-INTERRUPTER, TR,75mW,BGA,TR |
| Парткод: | 0604-001393 |
| Деталь: | HARNESS, SCX-4729FD,UL1032,AWG24,125,SING |
| Парткод: | JC39-01950A |
| Деталь: | BUSH-SHAFT EXIT, Others,KIWHA,NW-02 |
| Парткод: | JC61-03782B |
| Цена: | 500 ₽ |
| Деталь: | FRAME-EXIT, ML-2950ND,ABS+PC,BLACK(6229Y) |
| Парткод: | JC61-04385D |
| Деталь: | FRAME-EXIT ROLLER, ML-2950ND,SEC |
| Парткод: | JC93-00412A |
| Цена: | 500 ₽ |
| Деталь: | FRAME-ROLLER DECURL, ML-2950ND,SEC |
| Парткод: | JC93-00413A |
| Деталь: | SHAFT-EXIT F DN, ML-2950ND,PET-GF,280.9,8 |
| Парткод: | JC66-03001A |
| Деталь: | RMO-RUBBER EXIT_DUP, ML-2150 |
| Парткод: | JC73-40915B |
| Деталь: | ROLLER-EXIT_FR, ML-2580N,POM |
| Парткод: | JC66-02551A |
| Деталь: | ROLLER-EXIT_MAIN, ML-1660,POM,F25-03HT |
| Парткод: | JC66-02742A |
| Деталь: | HOLDER-EXIT F DOWN, ML-1660,PC,BLACK,HN-1 |
| Парткод: | JC61-03781A |
| Деталь: | SPRING-CS, SUS,PI0.4,D3.9,L13,OD4.3 |
| Парткод: | 6107-001163 |
| Цена: | 500 ₽ |
| Деталь: | FUSER-LOWER, ML-2950ND,SEC,WORLD |
| Парткод: | JC91-01036A |
| Деталь: | FRAME-FUSER, ML-2950ND,EGI-SECC,NATURAL,1 |
| Парткод: | JC61-04367A |
| Деталь: | ROLLER-HEAT, ML-2950ND,24.75,AL3304-H34 |
| Парткод: | JC66-02993A |
| Цена: | 1 600 ₽ |
| Деталь: | BUSH-M-HR L_R2, SCX-4920N,PPS,25.3,29 |
| Парткод: | JC61-00888A |
| Цена: | 360 ₽ |
| Деталь: | BUSH-M-HR R_R2, SCX-4920N,PPS,25.3,29 |
| Парткод: | JC61-00887A |
| Цена: | 360 ₽ |
| Деталь: | GEAR-FUSER, ML-2950ND,PPS,1,36,BROWN,38 |
| Парткод: | JC66-02992A |
| Цена: | 250 ₽ |
| Деталь: | ROLLER, ML-1710D3,12,SUM22 or SUM23,6,24, |
| Парткод: | JC66-00600B |
| Цена: | 1 700 ₽ |
| Деталь: | SPRING ETC-PR(7300), ML-7300,SWPB,1.0,6.0 |
| Парткод: | JC61-00056A |
| Деталь: | BUSH-PR, ML-2950ND,PPS,6.0,BROWN |
| Парткод: | JC61-04366A |
| Деталь: | LEVER-LINK-JAM_L, ML-2950ND,SECC,1.2T,NAT |
| Парткод: | JC66-02982A |
| Деталь: | BRUSH-ANTISTATIC, ML-2950ND,SUS FIBER,13, |
| Парткод: | JC67-00541A |
| Деталь: | HOLDER-JAM, ML-2950ND,PC,BLACK |
| Парткод: | JC61-04364A |
| Деталь: | LEVER-LINK-JAM_R, ML-2950ND,SECC,1.2T,NAT |
| Парткод: | JC66-02983A |
| Деталь: | SHEET-DUPLEX PATH, ML-3710,PET+TAPE NITTO |
| Парткод: | JC63-02956A |
| Деталь: | GUIDE-FRAME_DUPLEX, ML-2950ND,HIPS,2.5,25 |
| Парткод: | JC61-04394A |
| Деталь: | PHOTO-INTERRUPTER, TR,75mW,BGA,TR |
| Парткод: | 0604-001393 |
| Деталь: | SPRING-CS, SUS304,0.45,5.05,19.5,4.6,5.5, |
| Парткод: | 6107-002934 |
| Деталь: | ACTUATOR-EMPTY, ML-2950ND,POM,F25-03HT,BL |
| Парткод: | JC66-02997A |
| Деталь: | LEVER-GUIDE_DUPLEX, ML-2950ND,ABS,28,43.1 |
| Парткод: | JC66-03033A |
| Деталь: | SHAFT-PICKUP, ML-2950ND,PC,147.3,8,BLACK, |
| Парткод: | JC66-03006A |
| Деталь: | GUIDE-PICKUP, ML-2950ND,HIPS,2.0,228.64,H |
| Парткод: | JC61-04400A |
| Деталь: | ROLLER-FEED, ML-3200,EPDM,SUM22,6 |
| Парткод: | JC66-03096A |
| Цена: | 400 ₽ |
| Деталь: | BUSH-D6/L4, POM,CLP-310,ID6,OD9,L4,WHITE, |
| Парткод: | JC61-02372A |
| Деталь: | FRAME-PICKUP ONEWAY, ML-2955ND,SEE |
| Парткод: | JC93-00405A |
| Цена: | 600 ₽ |
| Деталь: | HOLDER-PICKUP, ML-2950ND,ABS+PC,2.3,59.1, |
| Парткод: | JC61-04404A |
| Деталь: | GEAR-IDLE PICK UP, CLX-3170FN,POM,0.5,20, |
| Парткод: | JC66-01918A |
| Деталь: | CLUTCH-P-ONEWAY, ML-2955ND,POM |
| Парткод: | JC66-03047A |
| Деталь: | ROLLER-MAT_RETARD, ML-2950ND,EPDM |
| Парткод: | JC66-02939B |
| Цена: | 350 ₽ |
| Деталь: | PLATE-EARTH-TRANSFER, ML-2851ND,EGI-SECC, |
| Парткод: | JC61-02236A |
| Деталь: | BUSH-TR_L, ML-2851ND,STEEL SINTERED |
| Парткод: | JC61-02468A |
| Цена: | 230 ₽ |
| Деталь: | SPRING-ETC, SUS304,0.5,40.2,4.0,6,8 |
| Парткод: | 6107-002922 |
| Деталь: | PLATE-PUSH BUSH R, ML-2950ND,EGI-SECC,0.8 |
| Парткод: | JC61-04361A |
| Деталь: | BUSH-TR_L, ML-2950ND,POM,6.1,8,12.5,Natur |
| Парткод: | JC61-04413A |
| Деталь: | PLATE-PUSH BUSH L, ML-2950ND,EGI-SECC,0.8 |
| Парткод: | JC61-04362A |
| Деталь: | SPRING-CS, STS304WPB,PI0.45,D4.45,L14.8,I |
| Парткод: | 6107-001370 |
| Деталь: | SPRING ETC-TR, ML-5000A,SUS304 WPB,PI0.55 |
| Парткод: | JC61-70958A |
| Деталь: | BUSH-M-FEED IDLE, ML-1710,POM,2.1,4.2 |
| Парткод: | JC61-00585A |
| Деталь: | BUSH-SHAFT_EXIT, ML-2950ND,POM,6.0,8.0,10 |
| Парткод: | JC61-04406A |
| Деталь: | RING-E, ID4,OD9,T0.6,STSC |
| Парткод: | 6044-000125 |
| Деталь: | ROLLER-REGI, ML-2950ND,EPDM,SUM22,6 |
| Парткод: | JC66-03044A |
| Деталь: | FRAME BASE-PICKUP, ML-2955ND,SEE |
| Парткод: | JC93-00404A |
| Деталь: | FRAME-MIDDLE, ML-2950ND,ABS,275,HF-0660I |
| Парткод: | JC61-04384A |
| Деталь: | HOLDER-REGI, ML-2950ND,POM,WHT,F20-02 |
| Парткод: | JC61-04376A |
| Деталь: | PLATE-P-SAW, ML-1400,SUS304,0.15,15.1,216 |
| Парткод: | JC61-00604A |
| Деталь: | ACTUATOR-FEED, ML-2950ND,PC,NH-1035P,BLAC |
| Парткод: | JC66-02996A |
| Деталь: | ACTUATOR-REGI, ML-2950ND,PC,NH-1035P,BLAC |
| Парткод: | JC66-02995A |
| Деталь: | PBA-FEED SENSOR, ML-1660,SEC,FEED SENSOR, |
| Парткод: | JC92-02288A |
| Цена: | 360 ₽ |
| Деталь: | SPRING-TS, SUS,PI0.15,D3.95,ID3.8,OD4.1 |
| Парткод: | 6107-001164 |
| Цена: | 1 100 ₽ |
| Деталь: | FRAME BASE-REGI, ML-2955ND,SEE |
| Парткод: | JC93-00403A |
| Деталь: | MP, SL-M2825DW,SEC |
| Парткод: | JC90-01108E |
| Деталь: | COVER-PAPER_GUIDE, ML-2950ND,ABS,2.0,228. |
| Парткод: | JC63-03126A |
| Деталь: | SHAFT-REGI_IDLE, ML-2955ND,SUM 22,226,5,S |
| Парткод: | JC66-03045A |
| Деталь: | ROLLER-REGI_IDLE, ML-2950ND,POM,NW-02 |
| Парткод: | JC66-03003A |
| Деталь: | MP GUIDE-LOWER, SL-M2825DW,SEC |
| Парткод: | JC90-01111D |
| Деталь: | MP SUB-HOLDER IDLE, SL-M2825DW,SEC |
| Парткод: | JC90-01110E |
| Деталь: | ADJUST-MANUAL_L, SL-M2825DW,ABS,2.0,HF-06 |
| Парткод: | JC61-04416E |
| Деталь: | ADJUST-MANUAL_R, SL-M2825DW,ABS,2.0,47.76 |
| Парткод: | JC61-04417E |
| Деталь: | GUIDE-LOWER_MP_1, SL-M2825DW,HIPS,2.0,41. |
| Парткод: | JC61-04392D |
| Деталь: | GEAR-PINION, ML-2950ND,POM,0.5,32,3.9,WHI |
| Парткод: | JC66-03004A |
| Деталь: | COVER-ROLLER, SL-M2825DW,ABS+PC,2T,238.65 |
| Парткод: | JC63-03125D |
| Деталь: | PIN-ETC, 2.6,85.4,SUM22 |
| Парткод: | 6043-001409 |
| Деталь: | ROLLER-IDLE, ML-3700,POM,NW-02 |
| Парткод: | JC66-02798A |
| Деталь: | SPRING-CS, SUS304,0.55,4.95,18.0,4.4,5.5, |
| Парткод: | 6107-002937 |
| Деталь: | PLATE-GUIDE_DEVE_R, ML-2950ND,POM,24.84,3 |
| Парткод: | JC61-04382A |
| Деталь: | GUIDE-CST_REAR_R, ML-2950ND,ABS+PC,VO,NH- |
| Парткод: | JC61-04369A |
| Деталь: | GUIDE-KNOCK_UP_R, ML-2950ND,ABS,VE-0812,B |
| Парткод: | JC61-04371A |
| Деталь: | FOOT-ML80, ML-80,NBR,GRAY |
| Парткод: | JC61-40001A |
| Деталь: | FRAME-RIGHT, ML-2950ND,EGI-SECC,0.8 |
| Парткод: | JC61-04359A |
| Деталь: | CABLE CLAMP, DACS-3N,16.67 4,Nylon66,BL |
| Парткод: | 6502-001130 |
| Деталь: | COVER-SMPS, ML-2950ND,ABS+PC,1.5,162.5,91 |
| Парткод: | JC63-03120A |
| Деталь: | GUIDE-DEVE R, ML-2950ND,PC+G/F20%,3025PG2 |
| Парткод: | JC61-04386A |
| Деталь: | SPRING-ETC, SUS304,0.5,22.4,4.0,9.6,11.6 |
| Парткод: | 6107-002923 |
| Деталь: | GROUND-OPC, ML-2950ND,SUS,0.2,GROUND/UNC |
| Парткод: | JC63-03110A |
| Деталь: | FLAT CABLE, SCX-3200,26P,90mm,AWM20624,1. |
| Парткод: | JC39-01419A |
| Деталь: | HVPS, 24V,21.6V27.6V,MAX 5KV,MAX-2KV,600 |
| Парткод: | JC44-00205A |
| Цена: | 3 300 ₽ |
| Деталь: | SMPS-V2, ML-2950ND,KINGBIRD-V2,Flyback,22 |
| Парткод: | JC44-00206B |
| Деталь: | CLUTCH-ELECTRIC Z41, 2.5,41,0.6,120mA,200 |
| Парткод: | JC47-00035A |
| Цена: | 650 ₽ |
| Деталь: | CLUTCH-ELECTRIC Z45, 2.5,45,0.6,120mA,200 |
| Парткод: | JC47-00036A |
| Цена: | 650 ₽ |
| Деталь: | HOLDER-TR, ML-3700,ABS,2,24.4,9,ICE GREEN |
| Парткод: | JC61-04068A |
| Деталь: | PLATE-FRAME_BOTTOM, ML-2950ND,EGI-SECC,0. |
| Парткод: | JC61-04358A |
| Деталь: | GROUND-SAW, ML-2950ND,SUS,0.2,GROUND/UNC |
| Парткод: | JC63-03121A |
| Деталь: | ROLLER-TRANSFER, Kingbird,15.0 (mm),NBR+E |
| Парткод: | JC66-01218A |
| Цена: | 450 ₽ |
| Деталь: | GEAR-EXIT, ML-2950ND,POM,0.8,z18,NATURAL, |
| Парткод: | JC66-03013A |
| Деталь: | GEAR-FEED, ML-2950ND,POM,0.8,z16,NATURAL, |
| Парткод: | JC66-03014A |
| Деталь: | GEAR-IDLE EXIT, ML-2950ND,POM,0.8,z29,NAT |
| Парткод: | JC66-03017A |
| Деталь: | GEAR-RDCN EXIT, ML-2950ND,POM,0.5/0.8,z74 |
| Парткод: | JC66-03023A |
| Деталь: | PBA-JOINT, ML-2950ND,JOINT,45mmX20mm,FR1, |
| Парткод: | JC92-02406A |
| Деталь: | FRAME MAIN-EXIT, SL-2820DW,SEC |
| Парткод: | JC93-00410F |
| Деталь: | FRAME-PAPER PATH, SL-M2825DW,SEC |
| Парткод: | JC93-00414E |
| Деталь: | FRAME-PLATE_FUSER, ML-2950ND,SEC |
| Парткод: | JC93-00429A |
| Деталь: | FRAME-BRACKET_LSU, ML-2950ND,SEC |
| Парткод: | JC93-00430A |
| Деталь: | FRAME MAIN-LEFT, SL-2820ND,SEC |
| Парткод: | JC93-00839A |
| Деталь: | FRAME MAIN-RIGHT, SL-2820ND,SEC |
| Парткод: | JC93-00840A |
| Деталь: | LSU, ML-2950,SEC,Single,A4(Ltr),600,S1,78 |
| Парткод: | JC97-03958A |
| Цена: | 4 500 ₽ |
Коды ошибок
A1-1210
A1-2114, A1-3621, A1-3622
A1-4111, A1-4112, A1-4310
A2-1210, A2-2110
A3-3211, A3-3212
A3-3311, A3-3312
A3-3320
C2-2110, C2-3110
C2-2120, C2-2150, C2-3120
C2-2320, C2-2410, C2-3320
C2-2512, C2-3512
C2-3150, C2-4120, C2-4150
C2-3410, C2-4320, C2-4410
C2-4110, C2-5110
C2-4512, C2-5512
C2-5120, C2-5150
C2-5320, C2-5410
C5-1110, C5-1120
C5-1310
C5-1410
C5-1710
C6-1110, C6-1120
C7-1110
C7-1311
C9-1112, C9-1116
C9-1122, C9-1126
C9-1162
H1-1210
H1-1252
M1-1110
M1-1610
M1-5112, M1-5612
M2-1110, M2-2210
M3-1110
M3-2130
S2-1210
S2-4120
S5-3110
S6-3123, S6-3128
U1-2115, U1-2116
U1-2132, U1-2315, U1-2320
U1-2330, U1-2334
U1-2340, U1-234H
U2-6122, U2-6142, U2-6143
Описание
| Error code: | A1-1210 |
| Display: | Actuator Motor Failure #A1-1210: Turn off then on. |
| Description: | Error #A1-1210 Call for service |
| Causes: | The fuser motor does not operate. / The fuser motor is operating but is recognized as stop status. |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove the rear and right cover. 3) Check if there are any obstacles or paper around the fuser unit. 4) Check if the connection between main board and fuser motor are correct. 5) If the connection is OK, replace the fuser motor. 6) If the problem persists, replace the main board. |
| Error code: | A1-2114, A1-3621, A1-3622 |
| Display: | Actuator Motor Failure : #. Call for service if the problem persists. |
| Description: | Error #A1-2114 Call for service Error #A1-3621 Call for service Error #A1-3622 Call for service |
| Causes: | The motor for OPC/Deve/ITB does not operate normally. |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove the right cover. 3) Check if the connection between main board and 2 motors in the main drive unit are correct. 4) If the connection is OK, replace the motor in the main drive unit. 5) If the problem persists, replace the main drive unit. |
| Error code: | A1-4111, A1-4112, A1-4310 |
| Display: | Actuator Motor Failure : #. Call for service if the problem persists. |
| Description: | Error #A1-4111 Call for service Error #A1-4112 Call for service Error #A1-4310 Call for service |
| Causes: | The motor for OPC/Deve/ITB does not operate normally. |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove the right cover. 3) Check if the connection between main board and 2 motors in the main drive unit are correct. 4) If the connection is OK, replace the motor in the main drive unit. 5) If the problem persists, replace the main drive unit. |
| Error code: | A2-1210, A2-2110 |
| Display: | Actuator Fan Failure : #. Call for service if the problem persists. |
| Description: | Error #A2-1210 Call for service Error #A2-2110 Call for service |
| Causes: | The SMPS fan or Fuser fan does no operate normally. |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove the right cover. 3) Check if the connection between main board and the related fan is correct. 4) If the connection is OK, replace the defective fan. |
| Error code: | A3-3211, A3-3212 |
| Display: | Actuator Sensor Failure #: Call for service if the problem persists. |
| Description: | Error #A3-3211 Call for service Error #A3-3212 Call for service |
| Causes: | The inner temperature sensor is defective. |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Enter the tech mode. Check the temperature sensor output. 3) If the sensor is defective, replace it. 4) If the temperature sensor is OK, replace the main board. |
| Error code: | A3-3311, A3-3312 |
| Display: | Actuator Sensor Failure #: Call for service if the problem persists. |
| Description: | Error #A3-3311 Call for service Error #A3-3312 Call for service |
| Causes: | The outer temperature sensor is defective. |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Enter the tech mode. Check the temperature sensor output. 3) If the sensor is defective, replace it. 4) If the temperature sensor is OK, replace the main board. |
| Error code: | A3-3320 |
| Display: | Not proper room temperature. Change room temperature. |
| Description: | Not proper room temp. Move set |
| Causes: | The value of the outer temperature sensor is out of normal area. |
| Remedy: | 1) Check if the machine is installed in the proper area. 2) If the temperature sensor is defective, replace it. |
| Error code: | C2-2110, C2-3110 |
| Display: | Prepare new (color) toner cartridge.all f |
| Description: | Prepare Toner |
| Causes: | The remaining toner cartridge is less than 10% |
| Remedy: | 1) Print the supply information report. Check the life remaining of the toner cartridge. 2) If its life is at the end, turn the machine off and replace the toner cartridge with new one. |
| Error code: | C2-2120, C2-2150, C2-3120 |
| Display: | Replace with new (color) toner cartridge. |
| Description: | Replace Toner |
| Causes: | The toner cartridge is at the end of its life. |
| Remedy: | 1) If its life is at the end, turn the machine off and replace the toner cartridge with new one. |
| Error code: | C2-2320, C2-2410, C2-3320 |
| Display: | (color) Toner Failure: #. Install (color) toner cartridge again. Install yellow toner cartridge. |
| Description: | Error #C2-2320 Install Y toner Install yellow toner cartridge Error #C2-3320 Install M toner Install magenta toner cartridge |
| Causes: | The toner cartridge is not installed or the CRUM has some problem. |
| Remedy: | 1) Check if the toner cartridge is installed properly. Turn the machine off then on. 2) If the problem persists, check that the CRUM contact area is contaminated. Clean it. 3) If the problem persists, replace the toner cartridge with new one. |
| Error code: | C2-2512, C2-3512 |
| Display: | (Color) toner cartridge is not compatible. Check user`s guide. |
| Description: | Not Compatible Y toner cart. Not Compatible M toner cart. |
| Causes: | Toner cartridge is not compatible. |
| Remedy: | 1) Print the supply information report. Check information of the toner cartridge. 2) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one. |
| Error code: | C2-3150, C2-4120, C2-4150 |
| Display: | Replace with new (color) toner cartridge. |
| Description: | Replace Toner |
| Causes: | The toner cartridge is at the end of its life. |
| Remedy: | 1) If its life is at the end, turn the machine off and replace the toner cartridge with new one. |
| Error code: | C2-3410, C2-4320, C2-4410 |
| Display: | (color) Toner Failure: #. Install (color) toner cartridge again. Install yellow toner cartridge. |
| Description: | Install cyan toner cartridge Error #C2-4320 Install C toner Install cyan toner cartridge |
| Causes: | The toner cartridge is not installed or the CRUM has some problem. |
| Remedy: | 1) Check if the toner cartridge is installed properly. Turn the machine off then on. 2) If the problem persists, check that the CRUM contact area is contaminated. Clean it. 3) If the problem persists, replace the toner cartridge with new one. |
| Error code: | C2-4110, C2-5110 |
| Display: | Prepare new (color) toner cartridge.all f |
| Description: | Prepare Toner |
| Causes: | The remaining toner cartridge is less than 10% |
| Remedy: | 1) Print the supply information report. Check the life remaining of the toner cartridge. 2) If its life is at the end, turn the machine off and replace the toner cartridge with new one. |
| Error code: | C2-4512, C2-5512 |
| Display: | (Color) toner cartridge is not compatible. Check user`s guide. |
| Description: | Not Compatible C toner cart. Not Compatible K toner cart. |
| Causes: | Toner cartridge is not compatible. |
| Remedy: | 1) Print the supply information report. Check information of the toner cartridge. 2) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one. |
| Error code: | C2-5120, C2-5150 |
| Display: | Replace with new (color) toner cartridge. |
| Description: | Replace Toner |
| Causes: | The toner cartridge is at the end of its life. |
| Remedy: | 1) If its life is at the end, turn the machine off and replace the toner cartridge with new one. |
| Error code: | C2-5320, C2-5410 |
| Display: | (color) Toner Failure: #. Install (color) toner cartridge again. Install yellow toner cartridge. |
| Description: | Error #C2-5320 Install K toner Install black toner cartridge |
| Causes: | The toner cartridge is not installed or the CRUM has some problem. |
| Remedy: | 1) Check if the toner cartridge is installed properly. Turn the machine off then on. 2) If the problem persists, check that the CRUM contact area is contaminated. Clean it. 3) If the problem persists, replace the toner cartridge with new one. |
| Error code: | C5-1110, C5-1120 |
| Display: | Prepare new Transfer belt Replace new Transfer belt |
| Description: | Prepare new Transfer belt Replace new Transfer belt |
| Causes: | The ITB Unit is at the end of its life. |
| Remedy: | 1) Print the supply information report. Check the life remaining of the ITB unit. 2) If its life is at the end, turn the machine off and replace the ITB unit with new one. |
| Error code: | C5-1310 |
| Display: | Install image transfer belt unit. |
| Description: | Install TR belt unit. |
| Causes: | The ITB Unit is not installed properly. |
| Remedy: | 1) Turn the machine off. Remove and reinstall the ITB unit. 2) Turn the machine on. If the problem persists, replace the ITB unit. |
| Error code: | C5-1410 |
| Display: | Image transfer belt unit is not compatible. Check users guide. |
| Description: | Not compatible transfer belt |
| Causes: | The ITB unit is not compatible. |
| Remedy: | 1) Print the supply information report. Check information of the ITB Unit. 2) If the toner cartridge is not a Samsung genuine ITB Unit, replace with new one. |
| Error code: | C5-1710 |
| Display: | Transfer Belt Error |
| Description: | Transfer Belt Error |
| Causes: | The ITB home position sensor has the problem. |
| Remedy: | 1) Turn the machine off. Replace the ITB Unit. |
| Error code: | C6-1110, C6-1120 |
| Display: | Prepare new fuser unit. Replace with new fuser unit. |
| Description: | Replace Fuser Soon Replace new Fuser unit |
| Causes: | The fuser unit is at the end of its life. |
| Remedy: | 1) Print the supply information report. Check the life remaining of the fuser unit. 2) If its life is at the end, turn the machine off and replace the fuser unit with new one. |
| Error code: | C7-1110 |
| Display: | Waste toner container is almost full. Order new one. |
| Description: | Waste toner Full Replace new one |
| Causes: | The waste toner container is at the end of its life. |
| Remedy: | 1) Print the supply information report. Check the life remaining of the waste toner container. 2) If its life is at the end, turn the machine off and replace the waste toner container with new one. |
| Error code: | C7-1311 |
| Display: | Waste toner container is not installed. Install it. |
| Description: | Not Installed Waste tank |
| Causes: | The waste toner container is not installed |
| Remedy: | 1) Check if the waste toner container is installed properly. 2) Remove and reinstall the waste toner container. |
| Error code: | C9-1112, C9-1116 |
| Display: | Replace with new Tray1 pickup roller. End of life, Replace with new Tray1 retard roller. |
| Description: | Replace new Tray1 roller Replace new Tray1 roller |
| Causes: | The pick up roller or reverse roller is at the end of its life. |
| Remedy: | 1) Turn the machine off. 2) Replace the pick up roller Assy and reverse roller Assy. |
| Error code: | C9-1122, C9-1126 |
| Display: | Replace with new Tray2 pickup roller. End of life, Replace with new Tray2 retard roller. |
| Description: | Replace new Tray2 roller Replace new Tray2 roller |
| Causes: | The pick up roller or reverse roller is at the end of its life. |
| Remedy: | 1) Turn the machine off. 2) Replace the pick up roller Assy and reverse roller Assy from the tray2 |
| Error code: | C9-1162 |
| Display: | Replace with new MP pickup roller |
| Description: | Replace new MP Pickup roller |
| Causes: | The MP pick up roller is at the end of its life. |
| Remedy: | 1) Turn the machine off. 2) Replace the MP pick up roller. |
| Error code: | H1-1210 |
| Display: | Paper jam in Tray2. |
| Description: | Paper Jam in Tray 2 |
| Causes: | The jammed paper has occurred in the tray2. |
| Remedy: | 1) Remove the jammed paper. 2) If the jammed paper occurs continually, check the followings. a) Check if the pick up/forward/reverse roller are worn out or contaminated. Clean the contaminated part or replace it. b) Check if the actuator is assembled correctly. 3) If the pick up clutch is defective, replace it. |
| Error code: | H1-1252 |
| Display: | Paper empty in tray 2 / Paper is empty in tray 2. Load paper |
| Description: | Paper Empty in Tray 2 |
| Causes: | Paper is empty in Tray1 |
| Remedy: | 1) Take off the cassette. If there is no paper on the tray2, load the paper. 2) If the problem persists, check the following. a) Check if the paper empty sensor is contaminated or defective. Replace it. |
| Error code: | M1-1110 |
| Display: | Paper Jam in Tray1. |
| Description: | Paper jam in tray 1. Please remove the paper |
| Causes: | The jammed paper has occurred in the tray. |
| Remedy: | 1) Clear the jam from the tray1. 2) Remove the tray. Check if the loaded paper is in proper place. Align it. 3) If the jammed paper occurred before entering it to the separation roller, check the Sheet Retard / Pickup roller / Forward roller / CST Knock up / CST Knock up Spring. 4) If the jammed paper occurred after entering it to the separation roller, check the Ribs in paper path. |
| Error code: | M1-1610 |
| Display: | Paper jam in MP Tray. |
| Description: | Paper Jamin MP tray |
| Causes: | The jammed paper has occurred in the MP tray. |
| Remedy: | 1) Remove the jammed paper. 2) If the jammed paper occurs continually, check the followings. a) Check if the pick up/forward/reverse roller are worn out or contaminated. Clean the contaminated part or replace it. b) Check if the actuator is assembled correctly. 3) If the pick up clutch is defective, replace it. 4) If the problem persists, replace the MP unit. |
| Error code: | M1-5112, M1-5612 |
| Display: | Paper Empty in Tray1 Paper Empty in MP Tray |
| Description: | Paper Empty in Tray1 Paper Empty in MP Tray |
| Causes: | Paper is empty in Tray1 |
| Remedy: | 1) Take off the cassette. If there is no paper on the tray, load the paper. 2) If the problem persists, check the following. a) Check if the paper empty sensor is contaminated or defective. Replace it. |
| Error code: | M2-1110, M2-2210 |
| Display: | Paper Jam inside machine Paper Jam inside of duplex |
| Description: | Paper Jam inside machine Paper Jam inside of duplex |
| Causes: | The jammed paper has occurred inside machine. |
| Remedy: | 1) Open the rear cover. Remove the jammed paper. 2) If the problem persists, check the following. a) Check if there is any obstacles or paper on the paper path. Remove it. b) Check if the FRAME-REGI unit and FRAME-RATARD unit are assembled properly. If there is any defective part in these units, replace it or Assy. c) Check the motor operation, gear in the PH drive unit. If there is any defective parts, replace it or PH drive unit. d) Check the T1–DRIVE unit. If there is any defective parts, replace it or T1–DRIVE unit. |
| Error code: | M3-1110 |
| Display: | Paper jam in exit area. |
| Description: | A paper jam was detected in the exit area. |
| Causes: | A paper jam was detected in the exit area. |
| Remedy: | 1) Open the rear cover. Remove the jammed paper. 2) Check if the Guide-Change Duplex of the rear cover is defective. 3) Check if the exit sensor and actuator is working normally. |
| Error code: | M3-2130 |
| Display: | Output bin full Remove paper |
| Description: | Paper in output bin is full. Remove printed paper |
| Causes: | The machine detected that the output tray has got full or the bin-full sensor is defective. |
| Remedy: | 1) Remove the paper on the output tray. (The maximum loading capacity is 150 sheets based on standard paper (80 g/m²).) 2) Check if the Bin-full Sensor connector is connected properly. Reconnect it or replace the Bin-full sensor. |
| Error code: | S2-1210 |
| Display: | Error #S2-1210 Call for service |
| Description: | Error #S2-1210 Call for service |
| Causes: | The power Micom chip on main board is not detected. |
| Remedy: | 1) Turn the machine off then on. 2) If the error persists, replace the main board. |
| Error code: | S2-4120 |
| Display: | Door open. Close it. |
| Description: | Door open Close it |
| Causes: | Door is open or the cover open switch is defective. |
| Remedy: | 1) Check if the front cover is closed perfectly. 2) If the error persists, check that the cover-open sensor is working normally. If it is defective, replace the HVPS board. |
| Error code: | S5-3110 |
| Display: | Error #S5-3110 Call for service |
| Description: | Error #S5-3110 Call for service |
| Causes: | The communication error between main board and OPE board has occurred. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, check the followings. a) Check the connection between main board and OPE board. Reconnect the harness. b) If the connection is OK, replace the main board or OPE board. |
| Error code: | S6-3123, S6-3128 |
| Display: | This IP address conflicts with that of other system. Check it. 802.1x authentication failed. Please Contact the System Administrator. |
| Description: | Network Problem: IP Conflict 802.1x Network Error |
| Causes: | IP address conflicts with that of other system. |
| Remedy: | 1) Change the machine’s IP address. 2) Check the setting-up for 802.1x confirmation server. |
| Error code: | U1-2115, U1-2116 |
| Display: | Fuser Unit Failure #U1-2115 : Turn off then on. Fuser Unit Failure #U1-2116 : Turn off then on. |
| Description: | Error #U1-2115 Turn off then on Error #U1-2116 Turn off then on |
| Causes: | The fuser unit has the problem for pressure control. |
| Remedy: | 1) Turn the machine off. Remove and reinstall the fuser unit. Turn the machine off. Is this error message disappeared? 2) Open the rear cover. Check if the fuser pressure cam is working normally. • If the cam operation is normal, replace the cam sensor. 3) Remove the side cover. Check if the fuser motor is working normally. 4) Check if the swing-gear is in the position below when the cam works. If not, replace the fuser drive unit. |
| Error code: | U1-2132, U1-2315, U1-2320 |
| Display: | Error # Turn off then on |
| Description: | Error #U1-2132 Turn off then on Error #U1-2315 Turn off then on Error #U1-2320 Turn off then on |
| Causes: | The temperature control of fuser unit is abnormal. |
| Remedy: | 1) Check if the input voltage is normal. 2) Turn the machine off. Remove and reinstall the fuser unit. Be careful when connecting the AC-connector and Thermistor connector. 3) Turn the machine on. Is the error message is disappeared? 4) Check the followings. If the fuser unit has any problem, replace it. a) Check if the fuser connector is connected properly. b) Check if the halogen lamp voltage is normal. c) Check if the thermistor is contaminated or twisted. 5) If the problem persists, replace the main board or SMPS board. |
| Error code: | U1-2330, U1-2334 |
| Display: | Error # Turn off then on |
| Description: | Error #U1-2330 Turn off then on Error #U1-2334 Turn off then on |
| Causes: | The temperature control of fuser unit is abnormal. |
| Remedy: | 1) Check if the input voltage is normal. 2) Turn the machine off. Remove and reinstall the fuser unit. Be careful when connecting the AC-connector and Thermistor connector. 3) Turn the machine on. Is the error message is disappeared? 4) Check the followings. If the fuser unit has any problem, replace it. a) Check if the fuser connector is connected properly. b) Check if the halogen lamp voltage is normal. c) Check if the thermistor is contaminated or twisted. 5) If the problem persists, replace the main board or SMPS board. |
| Error code: | U1-2340, U1-234H |
| Display: | Error # Turn off then on |
| Description: | Fuser Unit Failure: #U1-2340. Turn off then on. Call for service if the problem persists Fuser Unit Failure: #U1-234H. Turn off then on. Call for service if the problem persists |
| Causes: | The temperature control of fuser unit is abnormal. (Low Heat Error or Over Heat Error) |
| Remedy: | 1) Turn the machine off. Re-install the fuser unit. Then turn the machine on. Is the error message is disappeared? 2) If the problem persists, turn the machine off and remove the fuser unit. a) Check if the fuser connector is connected properly. b) Check if the input voltage is normal. c) Check if the thermistor is twisted or contaminated. |
| Error code: | U2-6122, U2-6142, U2-6143 |
| Display: | Error # Turn off then on |
| Description: | Error #U2-6122 Turn off then on Error #U2-6142 Turn off then on Error #U2-6143 Turn off then on |
| Causes: | LSU Motor does not work normally. / LSU Hsync signal is abnormal. |
| Remedy: | 1) Check if the LSU harness on the main board is connected properly. 2) If it is OK, check that the LSU harness on LSU board is connected properly. 3) Check if the LSU harness is defective. 4) If the problem persists, replace the LSU. 5) If the problem persists after replacing LSU, replace the main board. |
