Samsung Xpress M3015DW
Рейтинг
Модули
FRAME BASE PICKUP
COVER-TOP
FRAME MAIN LEFT
DUPLEX
CASSETTE
FRAME PAPER PATH
FRAME
CASSETTE ASSEMBLY
FRAME MAIN EXIT
FUSER LOWER
FRAME MAIN RIGHT
COVER
MAIN
Fuser
Детали FUSER LOWER
| Деталь: | SHEET-DUPLEX PATH, ML-3710,PET,0.125,14,2 |
| Парткод: | JC63-02956A |
| Деталь: | GUIDE-FRAME_DUPLEX, ML-2950ND,HIPS,2.5,25 |
| Парткод: | JC61-04394A |
| Деталь: | PHOTO-INTERRUPTER, TR,75mW,BGA,TR |
| Парткод: | 0604-001393 |
| Деталь: | SPRING-CS, SUS304,0.45,5.05,19.5,4.6,5.5, |
| Парткод: | 6107-002934 |
| Деталь: | ACTUATOR-EMPTY, ML-2950ND,POM,F25-03HT,BL |
| Парткод: | JC66-02997A |
| Деталь: | LEVER-GUIDE_DUPLEX, ML-2950ND,ABS,28,43.1 |
| Парткод: | JC66-03033A |
| Деталь: | SHAFT-PICKUP, ML-2950ND,PC,147.3,8,BLACK, |
| Парткод: | JC66-03006A |
| Деталь: | GUIDE-PICKUP, ML-2950ND,HIPS,2.0,228.64,H |
| Парткод: | JC61-04400A |
| Деталь: | ROLLER IDLE-FEED, ML-3200,EPDM,SUM22,6 |
| Парткод: | JC66-03096A |
| Цена: | 400 ₽ |
| Деталь: | BUSH-D6/L4, CLP-310,POM,ID6,OD9,L4,NATURA |
| Парткод: | JC61-02372A |
| Деталь: | FRAME-PICKUP ONEWAY, ML-2955ND,SEE |
| Парткод: | JC93-00405A |
| Цена: | 600 ₽ |
| Деталь: | HOLDER-PICKUP, ML-2950ND,ABS+PC,2.3,59.1, |
| Парткод: | JC61-04404A |
| Деталь: | GEAR-IDLE PICK UP, CLX-3170FN,POM,0.5,20, |
| Парткод: | JC66-01918A |
| Деталь: | CLUTCH-P-ONEWAY, ML-2955ND,POM |
| Парткод: | JC66-03047A |
| Деталь: | ROLLER IDLE-MAT_RETARD, ML-2950ND,EPDM |
| Парткод: | JC66-02939B |
| Цена: | 350 ₽ |
| Деталь: | COVER-TOP, SL-M3015DW,SEE |
| Парткод: | JC95-02040A |
| Деталь: | STACKER-MAIN, CLP-415N,ABS,2.2,98,76.3,HB |
| Парткод: | JC61-05513A |
| Деталь: | COVER-TOP, SL-M3015DW,ABS,SPLIT-BROWN BLA |
| Парткод: | JC63-05381A |
| Деталь: | BRUSH-ANTISTATIC, ML-2950ND,THUNDERON FIB |
| Парткод: | JC67-00552A |
| Деталь: | STACKER-RX_PAPER, ML-2855ND,ABS+PC,26.7,3 |
| Парткод: | JC61-03321A |
| Деталь: | STACKER-BIN_FULL, ML-2950ND,ABS+PC,46.56, |
| Парткод: | JC61-04415D |
| Деталь: | SPRING-ETC, SUS304,0.5,57.4,6.6,5,6 |
| Парткод: | 6107-002926 |
| Деталь: | COVER-EXIT, SL-M2820DW,ABS,2.0,SPLIT BROW |
| Парткод: | JC63-04209A |
| Деталь: | PBA-OPE, ML-4210D,SEC,FR1,1LAYER |
| Парткод: | JC92-02609A |
| Деталь: | HOLDER-KEY, SL-M2820DW,ABS,2.0,SPLIT BROW |
| Парткод: | JC61-06025A |
| Деталь: | HOLDER-SHAFT, ML-1660,POM,21.8,BLACK,F25- |
| Парткод: | JC61-03973A |
| Деталь: | GUIDE-CST_REAR_L, ML-2950ND,ABS,HF-0660I, |
| Парткод: | JC61-04368A |
| Деталь: | MOTOR BLDC-TYPE1, 3002500rpm,DC 24V,25W, |
| Парткод: | JC31-00156A |
| Деталь: | GEAR-FUSER DR OUT, ML-2950ND,POM,1.0,z29, |
| Парткод: | JC66-03016A |
| Цена: | 250 ₽ |
| Деталь: | GUIDE-KNOCK_UP_L, ML-2950ND,ABS,HF-0660I, |
| Парткод: | JC61-04370A |
| Деталь: | PLATE-GUIDE_DEVE_L, ML-2950ND,POM,24.8,38 |
| Парткод: | JC61-04381A |
| Деталь: | FRAME-LEFT, ML-2950ND,EGI-SECC,0.8 |
| Парткод: | JC61-04360A |
| Деталь: | BUSH-SHAFT_MP, ML-2950ND,POM,6.0,9.0,5,WH |
| Парткод: | JC61-04405A |
| Деталь: | GEAR-IDLE FEED2, ML-2950ND,POM,0.5,z24,NA |
| Парткод: | JC66-03018A |
| Деталь: | GEAR-IDLE FEED3, ML-2950ND,POM,0.5/0.8,z3 |
| Парткод: | JC66-03019A |
| Деталь: | HOLDER-COUPLER, ML-2950ND,PC+GF20%,BLACK, |
| Парткод: | JC61-04387A |
| Деталь: | GEAR-IDLE FEED, ML-2950ND,POM,0.5,z94,NAT |
| Парткод: | JC66-03020A |
| Деталь: | GEAR-HUB CLUTCH, POM,18.5,10.4,11.3,NW-02 |
| Парткод: | JC66-00340A |
| Цена: | 220 ₽ |
| Деталь: | GEAR-RDCN FEED1, ML-2950ND,POM,0.5,z101/z |
| Парткод: | JC66-03024A |
| Деталь: | GEAR-RDCN FEED2, ML-2950ND,POM,0.5/0.6,z3 |
| Парткод: | JC66-03025A |
| Деталь: | COUPLER-CAM, ML-2950ND,POM,5,20.32,F20-02 |
| Парткод: | JC67-00538A |
| Деталь: | LEVER-COUPLING A, ML-2950ND,POM,Natural,L |
| Парткод: | JC66-03034A |
| Деталь: | DRIVE-MAIN, SL-M3015ND,NON-MD |
| Парткод: | JC93-00417B |
| Деталь: | COVER-HARNESS, ML-2950ND,ABS,77.57,120.38 |
| Парткод: | JC63-03123A |
| Деталь: | DUPLEX, ML-2955ND,SEE |
| Парткод: | JC90-01109A |
| Деталь: | DUPLEX, ML-2955ND,SEE |
| Парткод: | JC90-01109B |
| Деталь: | ROLLER IDLE-M-IDLE_ DUP, ML-3560,POM,NW-0 |
| Парткод: | JC66-00896A |
| Деталь: | PCT-SILP WASHER, POLYSIDER,T0.5 |
| Парткод: | JK72-00058A |
| Деталь: | SHAFT-IDLE ROLL, DUP, ML-2150,SUM24L,25,2 |
| Парткод: | JC66-00444A |
| Деталь: | SPRING-TS, SWPB,0.75,W20,ID3.5 |
| Парткод: | 6107-001156 |
| Деталь: | GUIDE-DUPLEX_UPPER, ML-2950ND,ABS,2.0,60. |
| Парткод: | JC61-04395A |
| Деталь: | GUIDE-PAPER_DUPLEX, ML-2950ND,PC,1.5,14.9 |
| Парткод: | JC61-04393A |
| Деталь: | BRACKET-DUPLEX_ALIGN, ML-2950ND,EGI-SECC, |
| Парткод: | JC61-04403A |
| Деталь: | TERMINAL-GND_DUPLEX, ML-2950ND,C5191W,OD |
| Парткод: | JC65-00052A |
| Деталь: | BUSH-ROLLER_DUP, ML-2950ND,POM,4.0,7.6,NA |
| Парткод: | JC61-04407A |
| Деталь: | ROLLER IDLE-RUBBER_FEED_DUP, ML-2950ND,EP |
| Парткод: | JC66-03046A |
| Деталь: | SHAFT-FEED_DUP_1, ML-2950ND,POM,58.1,3.95 |
| Парткод: | JC66-03008A |
| Деталь: | PULLEY-DUP, ML-2950ND,POM,NATURAL,3.95,10 |
| Парткод: | JC66-03010A |
| Деталь: | GEAR-EXIT F/DOWN, ML-4500,POM,0.8,BLACK,F |
| Парткод: | JC66-00038A |
| Деталь: | BELT-FLAT RUBBER, L280, W3.2, S2M, 140 |
| Парткод: | JC66-20901A |
| Деталь: | ROLLER IDLE-FEED_DUP2, ML-3200,EPDM,SUM22 |
| Парткод: | JC66-03097A |
| Деталь: | FRAME-DUPLEX_BASE, ML-2950ND,HIPS,BLACK,2 |
| Парткод: | JC61-04391A |
| Деталь: | LOCKER-DUP, NL-2950ND,POM,NATURAL,F20-02 |
| Парткод: | JC64-00658A |
| Деталь: | CASSETTE, ML-2975DW,SEE |
| Парткод: | JC90-01224B |
| Цена: | 3 200 ₽ |
| Деталь: | PLATE-KNOCK_UP, EGI-SECC,0.8,257.8,173.1, |
| Парткод: | JC61-04379A |
| Деталь: | RPR-PAD CASSETTE, ML-1510,Urethan Sponge, |
| Парткод: | JC73-00141A |
| Цена: | 80 ₽ |
| Деталь: | SPRING-CS, SUS304,0.8,18.2,64.0,17.4,19.0 |
| Парткод: | 6107-002935 |
| Деталь: | GEAR-PINION, ML-2950ND,POM,0.5,32,3.9,WHI |
| Парткод: | JC66-03004A |
| Деталь: | COVER-CASSETTE, ML-2975DW,ABS,1.5,67.7,45 |
| Парткод: | JC63-03124C |
| Деталь: | CASSETTE SUB-RETARD, ML-2975DW |
| Парткод: | JC90-01107B |
| Цена: | 900 ₽ |
| Деталь: | GUIDE-ADJUST L, M4020,ABS,2.0,135.5,95.88 |
| Парткод: | JC61-04397C |
| Деталь: | LOCKER-PLATE, ML-2950ND,POM,WHITE,KEPITAL |
| Парткод: | JC64-00657A |
| Деталь: | SPRING ETC-LOCKER,PLATE, SF6000,SUS304WPB |
| Парткод: | JG61-70531A |
| Деталь: | LOCKER-CASSETTE, ML-3710,POM,NTR,41.5, 15 |
| Парткод: | JC64-00610A |
| Деталь: | SPRING-CS, SUS304,0.5,4.3,17.0,3.8,4.8,19 |
| Парткод: | 6107-002936 |
| Деталь: | CASSETTE SUB-GUIDE RIGHT, M4020,SEC |
| Парткод: | JC90-01106C |
| Деталь: | CASSETTE SUB-HANDLE, ML-2975DW,SEE |
| Парткод: | JC90-01225B |
| Деталь: | CASSETTE SUB-GUIDE REAR, M4020,SEC |
| Парткод: | JC90-01105D |
| Цена: | 950 ₽ |
| Деталь: | FRAME-CASSETTE, ML-2975DW,HIPS,SPLIT GRAY |
| Парткод: | JC61-04380C |
| Деталь: | ROLLER-MAT_RETARD, ML-2955ND,EPDM,16,23.5 |
| Парткод: | JC66-02939C |
| Деталь: | HANDLE-CASSETTE, SL-M2820DW,ABS,2.0,CM-10 |
| Парткод: | JC64-00903B |
| Деталь: | INDICATOR-PAPER, ML-2975DW,ABS,CREAM WHIT |
| Парткод: | JC64-00656E |
| Деталь: | PLATE-EARTH-TRANSFER, ML-2851ND,EGI-SECC, |
| Парткод: | JC61-02236A |
| Деталь: | BUSH-TR_L, ML-2851ND,STEEL SINTERED |
| Парткод: | JC61-02468A |
| Цена: | 230 ₽ |
| Деталь: | SPRING-ETC, SUS304,0.5,40.2,4.0,6,8 |
| Парткод: | 6107-002922 |
| Деталь: | PLATE-PUSH BUSH R, ML-2950ND,EGI-SECC,0.8 |
| Парткод: | JC61-04361A |
| Деталь: | BUSH-TR_L, ML-2950ND,POM,6.1,8,12.5,Natur |
| Парткод: | JC61-04413A |
| Деталь: | PLATE-PUSH BUSH L, ML-2950ND,EGI-SECC,0.8 |
| Парткод: | JC61-04362A |
| Деталь: | SPRING-CS, STS304WPB,PI0.45,D4.45,L14.8,I |
| Парткод: | 6107-001370 |
| Деталь: | SPRING ETC-TR, ML-5000A,SUS304 WPB,PI0.55 |
| Парткод: | JC61-70958A |
| Деталь: | BUSH-M-FEED IDLE, ML-1710,POM,2.1,4.2 |
| Парткод: | JC61-00585A |
| Деталь: | BUSH-SHAFT_EXIT, ML-2950ND,POM,6.0,8.0,10 |
| Парткод: | JC61-04406A |
| Деталь: | RING-E, ID4,OD9,T0.6,STSC |
| Парткод: | 6044-000125 |
| Деталь: | ROLLER IDLE-REGI, ML-2950ND,EPDM,SUM22,6 |
| Парткод: | JC66-03044A |
| Деталь: | FRAME BASE-PICKUP, ML-2955ND,SEE |
| Парткод: | JC93-00404A |
| Деталь: | FRAME-MIDDLE, ML-2950ND,ABS,275,HF-0660I |
| Парткод: | JC61-04384A |
| Деталь: | HOLDER-REGI, ML-2950ND,POM,WHT,F20-02 |
| Парткод: | JC61-04376A |
| Деталь: | PLATE-P-SAW, ML-1400,STS304,0.15,15.1,216 |
| Парткод: | JC61-00604A |
| Деталь: | ACTUATOR-FEED, ML-2950ND,PC,NH-1035P,BLAC |
| Парткод: | JC66-02996A |
| Деталь: | ACTUATOR-REGI, ML-2950ND,PC,NH-1035P,BLAC |
| Парткод: | JC66-02995A |
| Деталь: | PBA-FEED SENSOR, ML-1660,SEC,FEED SENSOR, |
| Парткод: | JC92-02288A |
| Цена: | 360 ₽ |
| Деталь: | SPRING-TS, SUS,PI0.15,D3.95,ID3.8,OD4.1 |
| Парткод: | 6107-001164 |
| Цена: | 1 100 ₽ |
| Деталь: | FRAME BASE-REGI, ML-2955ND,SEE |
| Парткод: | JC93-00403A |
| Деталь: | MP, SL-M2825DW,SEC |
| Парткод: | JC90-01108E |
| Деталь: | COVER-PAPER_GUIDE, ML-2950ND,ABS,2.0,228. |
| Парткод: | JC63-03126A |
| Деталь: | SHAFT-REGI_IDLE, ML-2955ND,SUM 22,226,5,S |
| Парткод: | JC66-03045A |
| Деталь: | ROLLER IDLE-REGI, ML-2950ND,POM,NW-02 |
| Парткод: | JC66-03003A |
| Деталь: | MP GUIDE-LOWER, SL-M2825DW,SEC |
| Парткод: | JC90-01111D |
| Деталь: | MP SUB-HOLDER IDLE, SL-M2825DW,SEC |
| Парткод: | JC90-01110E |
| Деталь: | ADJUST-MANUAL_L, SL-M2825DW,ABS,2.0,HF-06 |
| Парткод: | JC61-04416E |
| Деталь: | ADJUST-MANUAL_R, SL-M2825DW,ABS,2.0,47.76 |
| Парткод: | JC61-04417E |
| Деталь: | GUIDE-LOWER_MP_1, SL-M2825DW,HIPS,2.0,41. |
| Парткод: | JC61-04392D |
| Деталь: | GEAR-PINION, ML-2950ND,POM,0.5,32,3.9,WHI |
| Парткод: | JC66-03004A |
| Деталь: | COVER-ROLLER, SL-M2825DW,ABS,2T,238.65,35 |
| Парткод: | JC63-03125D |
| Деталь: | PIN-ETC, 2.6,85.4,SUM22 |
| Парткод: | 6043-001409 |
| Деталь: | ROLLER IDLE-RUBBER-IDLE, ML-3700,POM,LZ-7 |
| Парткод: | JC66-02798A |
| Деталь: | SPRING-CS, SUS304,0.55,4.95,18.0,4.4,5.5, |
| Парткод: | 6107-002937 |
| Деталь: | FLAT CABLE, SCX-3200,26P,90mm,AWM20624,1. |
| Парткод: | JC39-01419A |
| Деталь: | HVPS, 24V,21.6V27.6V,MAX 5KV,MAX-2KV,600 |
| Парткод: | JC44-00205A |
| Цена: | 3 300 ₽ |
| Деталь: | ETC-SMPS-V2, ML-2950ND,KINGBIRD V2 SMPS |
| Парткод: | JC98-03175A |
| Цена: | 4 900 ₽ |
| Деталь: | ETC-SMPS-V1, ML-2950ND,KINGBIRD V1 SMPS |
| Парткод: | JC98-03176A |
| Деталь: | CLUTCH-ELECTRIC, SL-M4030,POM,2.5,41,0.6, |
| Парткод: | JC47-00035C |
| Деталь: | CLUTCH-ELECTRIC Z45, 2.5,45,0.6,120mA,200 |
| Парткод: | JC47-00036A |
| Цена: | 650 ₽ |
| Деталь: | HOLDER-TR, ML-3700,ABS,2,24.4,9,ICE GREEN |
| Парткод: | JC61-04068A |
| Деталь: | PLATE-FRAME_BOTTOM, ML-2950ND,EGI-SECC,0. |
| Парткод: | JC61-04358A |
| Деталь: | FRAME-DUPLEX PATH ASSY, ML-2955ND,SEE |
| Парткод: | JC93-00416A |
| Деталь: | GROUND-SAW, ML-2950ND,STS,0.2,GROUND/UNC |
| Парткод: | JC63-03121A |
| Деталь: | ROLLER TR-TRANSFER, Kingbird,-,KOREA |
| Парткод: | JC66-01218A |
| Цена: | 450 ₽ |
| Деталь: | GEAR-EXIT, ML-2950ND,POM,0.8,z18,NATURAL, |
| Парткод: | JC66-03013A |
| Деталь: | GEAR-FEED, ML-2950ND,POM,0.8,z16,NATURAL, |
| Парткод: | JC66-03014A |
| Деталь: | GEAR-IDLE EXIT, ML-2950ND,POM,0.8,z29,NAT |
| Парткод: | JC66-03017A |
| Деталь: | GEAR-RDCN EXIT, ML-2950ND,POM,0.5/0.8,z74 |
| Парткод: | JC66-03023A |
| Деталь: | PBA-JOINT, ML-2950ND,JOINT,45mmX20mm,FR1, |
| Парткод: | JC92-02406A |
| Деталь: | FRAME MAIN-EXIT, SL-2820DW,SEC |
| Парткод: | JC93-00410F |
| Деталь: | FRAME-PAPER PATH, SL-M2825DW,SEC |
| Парткод: | JC93-00414E |
| Деталь: | FRAME-PLATE_FUSER, ML-2950ND,SEC |
| Парткод: | JC93-00429A |
| Деталь: | FRAME-BRACKET_LSU, ML-2950ND,SEC |
| Парткод: | JC93-00430A |
| Деталь: | FRAME MAIN-LEFT, SL-M3015ND,SEE,NON-MD |
| Парткод: | JC93-00839D |
| Деталь: | FRAME MAIN-RIGHT, SL-2825DW,SEC |
| Парткод: | JC93-00840B |
| Деталь: | LSU, ML-2950,SEC,Single,A4(Ltr),600,S1,78 |
| Парткод: | JC97-03958A |
| Цена: | 4 500 ₽ |
| Деталь: | DUPLEX, ML-2955ND,SEE |
| Парткод: | JC90-01109A |
| Деталь: | DUPLEX, ML-2955ND,SEE |
| Парткод: | JC90-01109B |
| Деталь: | FUSER, ML-2950ND,SEC,WORLD,220V |
| Парткод: | JC91-01034B |
| Цена: | 5 800 ₽ |
| Деталь: | FUSER, ML-2950ND,SEC,WORLD,110V |
| Парткод: | JC91-01034A |
| Деталь: | Датчик наличия бумаги |
| Парткод: | 0604-001415 |
| Цена: | 240 ₽ |
| Деталь: | FRAME MAIN-EXIT, SL-2820DW,SEC |
| Парткод: | JC93-00410F |
| Деталь: | PHOTO-INTERRUPTER, TR,75mW,BGA,TR |
| Парткод: | 0604-001393 |
| Деталь: | HARNESS, SCX-4729FD,UL10272,AWG26,125,SIN |
| Парткод: | JC39-01950A |
| Деталь: | BUSH-SHAFT EXIT, Others,KIWHA,NW-02 |
| Парткод: | JC61-03782B |
| Цена: | 500 ₽ |
| Деталь: | FRAME-EXIT, ML-2950ND,ABS+PC,BLACK(6229Y) |
| Парткод: | JC61-04385D |
| Деталь: | FRAME-EXIT ROLLER, ML-2950ND,SEC |
| Парткод: | JC93-00412A |
| Цена: | 500 ₽ |
| Деталь: | FRAME-ROLLER DECURL, ML-2950ND,SEC |
| Парткод: | JC93-00413A |
| Деталь: | SHAFT-EXIT F DN, ML-2950ND,PET-GF,280.9,8 |
| Парткод: | JC66-03001A |
| Деталь: | RMO-RUBBER EXIT_DUP, ML-2150 |
| Парткод: | JC73-40915B |
| Деталь: | ROLLER-EXIT_FR, ML-2580N,POM |
| Парткод: | JC66-02551A |
| Деталь: | ROLLER EXIT-MAIN, ML-2160,Decurl Roller,F |
| Парткод: | JC66-02742C |
| Деталь: | HOLDER-EXIT_F_DOWN, ML-2160,PC+GF,HN-1064 |
| Парткод: | JC61-03781C |
| Деталь: | SPRING-CS, SUS,PI0.4,D3.9,L13,OD4.3 |
| Парткод: | 6107-001163 |
| Цена: | 500 ₽ |
| Деталь: | FUSER-LOWER, ML-2950ND,SEC,WORLD |
| Парткод: | JC91-01036A |
| Деталь: | FRAME-FUSER, ML-2950ND,EGI-SECC,NATURAL,1 |
| Парткод: | JC61-04367A |
| Деталь: | ROLLER FUSER-HEAT, ML-2950ND,24.75,AL3304 |
| Парткод: | JC66-02993A |
| Цена: | 1 600 ₽ |
| Деталь: | BUSH-M-HR L_R2, SCX-4920N,PPS,25.3,29 |
| Парткод: | JC61-00888A |
| Цена: | 360 ₽ |
| Деталь: | BUSH-M-HR R_R2, SCX-4920N,PPS,25.3,29 |
| Парткод: | JC61-00887A |
| Цена: | 360 ₽ |
| Деталь: | GEAR-FUSER, ML-2950ND,PPS,1,36,BROWN,38 |
| Парткод: | JC66-02992A |
| Цена: | 250 ₽ |
| Деталь: | ROLLER, ML-1710D3,12,SUM22 or SUM23,6,24, |
| Парткод: | JC66-00600B |
| Цена: | 1 700 ₽ |
| Деталь: | SPRING ETC-PR(7300), ML-7300,SWPB,1.0,6.0 |
| Парткод: | JC61-00056A |
| Деталь: | BUSH-PR, ML-2950ND,PPS,6.0,BROWN |
| Парткод: | JC61-04366A |
| Деталь: | LEVER-LINK-JAM_L, ML-2950ND,SECC,1.2T,NAT |
| Парткод: | JC66-02982A |
| Деталь: | BRUSH-ANTISTATIC, ML-2950ND,SUS FIBER,13, |
| Парткод: | JC67-00541A |
| Деталь: | HOLDER-JAM, ML-2950ND,PC,BLACK |
| Парткод: | JC61-04364A |
| Деталь: | LEVER-LINK-JAM_R, ML-2950ND,SECC,1.2T,NAT |
| Парткод: | JC66-02983A |
| Деталь: | PLATE-GUIDE_DEVE_R, ML-2950ND,POM,24.84,3 |
| Парткод: | JC61-04382A |
| Деталь: | GUIDE-CST_REAR_R, ML-2950ND,ABS+PC,VO,NH- |
| Парткод: | JC61-04369A |
| Деталь: | GUIDE-KNOCK_UP_R, ML-2950ND,ABS,VE-0812,B |
| Парткод: | JC61-04371A |
| Деталь: | FRAME-RIGHT, ML-2950ND,EGI-SECC,0.8 |
| Парткод: | JC61-04359A |
| Деталь: | CABLE CLAMP, 4,Nylon66,BLACK |
| Парткод: | 6502-001130 |
| Деталь: | COVER-SMPS, ML-2950ND,ABS+PC,1.5,162.5,91 |
| Парткод: | JC63-03120A |
| Деталь: | GUIDE-DEVE R, ML-2950ND,PC+GF20%,3025PG20 |
| Парткод: | JC61-04386A |
| Деталь: | SPRING-ETC, SUS304,0.5,22.4,4.0,9.6,11.6 |
| Парткод: | 6107-002923 |
| Деталь: | GROUND-OPC, ML-2950ND,STS,0.2,GROUND/UNC |
| Парткод: | JC63-03110A |
| Деталь: | COVER-LEFT, SL-M2825DW,ABS,2.0,CREAM WHIT |
| Парткод: | JC63-04210B |
| Деталь: | COVER-RIGHT, SL-M2825DW,ABS+PC,2.1T,CREAM |
| Парткод: | JC63-04211B |
| Деталь: | COVER-REAR, SL-M2825DW,SEC |
| Парткод: | JC95-01852B |
| Деталь: | COVER-FRONT, SL-M2825DW,SEC |
| Парткод: | JC95-01853B |
| Деталь: | COVER-REAR, SL-M2825DW,ABS,2.0T,CREAM WHI |
| Парткод: | JC63-04212B |
| Деталь: | COVER-FACE UP, ML-2955ND,ABS,2.5,276.6,10 |
| Парткод: | JC63-03109A |
| Деталь: | GUIDE-CHANGE_DUP, ML-2950ND,PC+GF,1.2,223 |
| Парткод: | JC61-04377A |
| Деталь: | SPRING-ETC, SUS304,0.5,7.1,7.6,RIGHT |
| Парткод: | 6107-002996 |
| Деталь: | PBA-CRUM JOINT, ML-2975DW,SEC,3.3V,2L,FR- |
| Парткод: | JC92-02611A |
| Деталь: | HARNESS-CRUM_IF_FRONT, SCX-4805FW,UL10272 |
| Парткод: | JC39-01986A |
| Деталь: | COVER-FRONT, SL-M2825DW,ABS,2.5T,CREAM WH |
| Парткод: | JC63-04206B |
| Деталь: | COVER-MANUAL, ML-2955ND,ABS,2,250.2,48.7, |
| Парткод: | JC63-03127A |
| Деталь: | MEA-CRUM TERMINAL, CLP-310,SEC,EXPORT,-,- |
| Парткод: | JC97-03039A |
| Деталь: | COVER-HARNESS FRONT, SL-M2820DW,ABS,2.5T, |
| Парткод: | JC63-04207A |
| Деталь: | CASSETTE, ML-2975DW,SEE |
| Парткод: | JC90-01224B |
| Цена: | 3 200 ₽ |
| Деталь: | COVER-TOP, SL-M3015DW,SEE |
| Парткод: | JC95-02040A |
| Деталь: | COVER, SL-M2825DW,SEC |
| Парткод: | JC95-01849B |
| Деталь: | LEVER-COUPLING B, ML-2950ND,POM,WHT,LINK/ |
| Парткод: | JC66-03035A |
| Деталь: | PBA MAIN, M3015,SEC,MD,137 x 89.25 mm,Wla |
| Парткод: | JC92-02916A |
| Деталь: | PBA-WNPC, CLP-365W,SEC,BCM4319U,SDIO,3.3V |
| Парткод: | JC92-02517A |
| Деталь: | LABEL ETC-NFC TECTILE STICKER, EAD-X11,EU |
| Парткод: | JC68-03012A |
| Деталь: | LABEL VER-INFORMATION, C460,SEC,PP,0.1T,3 |
| Парткод: | JC68-03048B |
| Деталь: | FUSER, ML-2950ND,SEC,WORLD,220V |
| Парткод: | JC91-01034B |
| Цена: | 5 800 ₽ |
| Деталь: | FUSER, ML-2950ND,SEC,WORLD,110V |
| Парткод: | JC91-01034A |
| Деталь: | FUSER-UPPER, ML-2950ND,SEC,WORLD |
| Парткод: | JC91-01035A |
| Деталь: | LAMP-HALOGEN, 230V,850W |
| Парткод: | 4713-001565 |
| Цена: | 1 200 ₽ |
| Деталь: | LAMP-HALOGEN, 110V,850W |
| Парткод: | 4713-001566 |
| Деталь: | FUSER-LOWER, ML-2950ND,SEC,WORLD |
| Парткод: | JC91-01036A |
| Деталь: | CAP-LAMP_R, ML-2950ND,PET+GF,BLACK |
| Парткод: | JC67-00533A |
| Деталь: | FUSER-DRIVE EXIT, ML-2950ND,SEC,WORLD |
| Парткод: | JC91-01038A |
| Деталь: | CAP-LAMP_L, ML-2950ND,PET+GF,BLACK |
| Парткод: | JC67-00532A |
| Деталь: | ROLLER FUSER-STOPPER-GEAR, ML-1660,Rhodia |
| Парткод: | JC61-03968A |
| Деталь: | FUSER-REAR, ML-2950ND,SEC,WORLD,220V |
| Парткод: | JC91-01037B |
| Деталь: | FUSER-REAR, ML-2950ND,SEC,WORLD,110V |
| Парткод: | JC91-01037A |
| Деталь: | HARNESS-FUSER JOINT, ML-3710,1 pin,100mm, |
| Парткод: | JC39-01487A |
| Деталь: | THERMOSTAT, AC125/250V,195+-5100 |
| Парткод: | 4712-001091 |
| Деталь: | THERMISTOR-NTC ASSY, 7Kohm,3370K,0.3MWC,B |
| Парткод: | 1404-001447 |
| Деталь: | COVER-FUSER, ML-2950ND,PET+GF,290.98,BLAC |
| Парткод: | JC63-03132A |
| Деталь: | PMO-ROLLER_EXIT, HQ_LOAD_PD10,POM |
| Парткод: | JC72-40361A |
| Деталь: | SPRING ETC-FUSER EXIT, ML-7000,SUS304-WPB |
| Парткод: | JC61-70976A |
| Деталь: | GUIDE-CLAW, ML-3471ND,PPS,13.20,15.79,BRO |
| Парткод: | JC61-02154A |
| Цена: | 500 ₽ |
| Деталь: | SPRING-ETC, SWPB,0.29,3.2,3.78 |
| Парткод: | 6107-002817 |
| Цена: | 1 200 ₽ |
| Деталь: | ROLLER-SILICON_EXIT, ML-3700,SILICON |
| Парткод: | JC66-02955A |
| Деталь: | SHAFT-EXIT_F/UP, ML-2950ND,PET+GF,204.2,1 |
| Парткод: | JC66-02990A |
| Деталь: | GEAR-EXIT_Z19, ML-3700ND,POM,1,19,NTR,21. |
| Парткод: | JC66-02777A |
| Деталь: | BUSH-TX, ML-3471ND/SEE,POM,6,10,BLACK,M90 |
| Парткод: | JC61-02158A |
| Деталь: | GUIDE-REAR, ML-2950ND,PC,2.0T,237.31,BLAC |
| Парткод: | JC61-04363A |
| Деталь: | ROLLER-IDLE_EXIT, ML-2851ND,POM |
| Парткод: | JC66-01661A |
| Деталь: | SPRING-ETC, SUS304,PI0.2,ID4.5,OD4.9,8.1, |
| Парткод: | 6107-002670 |
| Деталь: | HOLDER-ACTUATOR, ML-3700,TEFLON,2.0,17.4 |
| Парткод: | JC61-04133A |
| Деталь: | ACTUATOR-EXIT, ML-2950ND,PA66,2.0T,Black |
| Парткод: | JC66-02991A |
Коды ошибок
11-2T11, 11-2T71
A1-1110
C1-1110, C1-1150
C1-1411, C1-1414
C1-1511, C1-1512, C1-1515
C1-1517, C1-1518
C1-1711, C1-1712
C1-1713, C1-1714
C3-1110, C3-1140
C3-1150, C3-1170
C3-1411
C3-1512
M1-1110
M1-1710
M1-5112, M1-5113, M1-5120
M1-5612, M1-5712
M2-1110
M2-2110, M2-2310
M3-1110, M3-1112
M3-2130
S1-3212, S1-2000
S2-4110
S6-3123
S6-3210, S6-3231, S6-3232
S6-3233, S6-3234
S6-3235, S6-3236
U1-2132, U1-23xx
U2-1112, U2-1113
Описание
| Error code: | 11-2T11, 11-2T71 |
| Description: | Tray 1 paper mismatch Manual Paper Mismatch |
| Causes: | Paper in tray is not matched to the machine paper setting. |
| Remedy: | 1) Check and change the paper setting of the corresponding tray properly. |
| Error code: | A1-1110 |
| Display: | Error #A1-1110 Turn off then on |
| Description: | Main Motor Failure: #A1-1110. Turn off then on. Call for service if the problem persists |
| Causes: | After working the main BLDC motor, the Ready signal has not occurred within 1 sec. |
| Remedy: | 1) Turn the machine off then on. If the error persists, refer to the following. 2) Check if the motor connector on the main board is connected properly. Reconnect it. 3) OPC coupler has overloaded. After removing the imaging unit, rotate the OPC coupler. (Spec : 6 kgf.cm) If there is any damage, the OPC coupler can’t rotate well. Replace the imaging unit. 4) The main BLDC motor is defective. • Unplug the connector from the motor carefully. • Replace the main BLDC motor with new one. 5) If the problem persists, replace the main board. |
| Error code: | C1-1110, C1-1150 |
| Description: | Prepare new toner cartridge. Replace with new toner cartridge. |
| Causes: | The remaining toner cartridge is less than 10% / The toner cartridge is at the end of its life. |
| Remedy: | Check the life remaining of the toner cartridge. If its life is at the end, turn the machine off and replace the toner cartridge with new one. |
| Error code: | C1-1411, C1-1414 |
| Description: | Toner cartridge is not installed. Install the cartridge. |
| Causes: | The toner cartridge is not installed. / The machine can’t detect the toner cartridge. |
| Remedy: | 1) Turn the machine off then on. 2) Remove the toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge. 3) Check if the CRUM contact area is contaminated. Clean it. |
| Error code: | C1-1511, C1-1512, C1-1515 |
| Description: | You are using a non-genuine cartridge now. It might cause malfunctioning or breakdown of this printer Toner cartridge is not compatible. Check the user guide |
| Causes: | Toner cartridge is not compatible. |
| Remedy: | 1) Open the front cover. Remove the toner cartridge. 2) Check if the label information of the toner cartridge is same with the machine’s one. (ex. /SEE) 3) If label information is different from the machine or the toner cartridge is not a samsung genuine, replace it with a new one. |
| Error code: | C1-1517, C1-1518 |
| Description: | You are using a non-genuine cartridge now. It might cause malfunctioning or breakdown of this printer Toner cartridge is not compatible. Check the user guide |
| Causes: | Toner cartridge is not compatible. |
| Remedy: | 1) Open the front cover. Remove the toner cartridge. 2) Check if the label information of the toner cartridge is same with the machine’s one. (ex. /SEE) 3) If label information is different from the machine or the toner cartridge is not a samsung genuine, replace it with a new one. |
| Error code: | C1-1711, C1-1712 |
| Display: | C1-1711, C1-1712 Errors |
| Description: | Toner Cartridge Failure: #C1-171x. Call for service |
| Causes: | The data of CRUM is not detected. / CRUM is defective. |
| Remedy: | 1) Open the front cover. Check if the toner cartridge is installed. 2) Remove and reinstall the toner cartridge. 3) Check if the contact terminal is contaminated or broken. Clean the contact terminal. 4) Check if the CRUM harness is connected correctly. Reconnect it. 5) If the harness is defective, replace it. 6) If the problem persists, replace the toner cartridge with new one. |
| Error code: | C1-1713, C1-1714 |
| Description: | Toner Cartridge Failure: #C1-171x. Call for service |
| Causes: | The data of CRUM is not detected. / CRUM is defective. |
| Remedy: | 1) Open the front cover. Check if the toner cartridge is installed. 2) Remove and reinstall the toner cartridge. 3) Check if the contact terminal is contaminated or broken. Clean the contact terminal. 4) Check if the CRUM harness is connected correctly. Reconnect it. 5) If the harness is defective, replace it. 6) If the problem persists, replace the toner cartridge with new one. |
| Error code: | C3-1110, C3-1140 |
| Description: | Prepare new imaging unit End of life, Replace with new imaging unit Replace with new imaging unit |
| Causes: | Imaging unit is at the end of its life. |
| Remedy: | Check the life remaining of the imaging unit. If its life is at the end, turn the machine off and replace the imaging unit with new one. |
| Error code: | C3-1150, C3-1170 |
| Description: | Prepare new imaging unit End of life, Replace with new imaging unit Replace with new imaging unit |
| Causes: | Imaging unit is at the end of its life. |
| Remedy: | Check the life remaining of the imaging unit. If its life is at the end, turn the machine off and replace the imaging unit with new one. |
| Error code: | C3-1411 |
| Display: | Imaging unit is not installed. Install the unit. |
| Description: | Imaging unit is not installed. Install the unit |
| Causes: | The imaging unit is not installed. / The machine can’t detect the imaging unit. |
| Remedy: | 1) Open the front cover. Check if the imaging unit is installed. 2) Remove and reinstall the imaging unit. 3) Check if the contact terminal is contaminated or broken. Clean the contact terminal. 4) Check if the CRUM harness is connected correctly. Reconnect it. 5) If the harness is defective, replace it. 6) If the problem persists, replace the imaging unit with new one. |
| Error code: | C3-1512 |
| Display: | Imaging unit is not compatible. Check user`s guide |
| Description: | Imaging unit is not compatible. Check the user guide |
| Causes: | Imaging unit is not compatible. |
| Remedy: | 1) Open the front cover. Remove the imaging unit. 2) Check if the label information of the imaging unit is same with the machine’s one. (ex. /SEE) 3) If label information is different from the machine or the imaging unit is not a samsung genuine, replace it with a new one. |
| Error code: | M1-1110 |
| Display: | Paper Jam in Tray1. |
| Description: | Paper jam in tray 1. Please remove the paper |
| Causes: | The jammed paper has occurred in the tray. |
| Remedy: | 1) Clear the jam from the tray1. 2) Remove the tray. Check if the loaded paper is in proper place. Align it. 3) If the jammed paper occurred before entering it to the separation roller, check the Sheet Retard / Pickup roller / Forward roller / CST Knock up / CST Knock up Spring. 4) If the jammed paper occurred after entering it to the separation roller, check the Ribs in paper path. |
| Error code: | M1-1710 |
| Description: | Paper jam in manual feeder. Please remove the paper |
| Causes: | The jammed paper has occurred in the manual feeder. |
| Remedy: | 1) Clear the jam from the manual feeder. 2) If the jammed paper in the manual feeder occurred continually, replace the MP unit. |
| Error code: | M1-5112, M1-5113, M1-5120 |
| Display: | Paper is empty in tray 1. Paper empty in all tray |
| Description: | Paper is empty in tray 1. Load paper Paper is empty in all tray. Load paper Paper is empty in MP tray. Load paper Paper is empty in manual feeder. Load paper |
| Causes: | Paper is empty in tray1 or manual feeder. / Paper is loaded in tray but the machine detects empty status. |
| Remedy: | 1) Load the paper in tray1 or manual feeder. 2) If the problem persists, check the following. 3) Check if the empty actuator works normally. If it is defective or broken, replace it. 4) If the actuator operation is OK, check the empty sensor. Reconnect the sensor connector. If the sensor is defective, replace it. |
| Error code: | M1-5612, M1-5712 |
| Description: | Paper is empty in tray 1. Load paper Paper is empty in all tray. Load paper Paper is empty in MP tray. Load paper Paper is empty in manual feeder. Load paper |
| Causes: | Paper is empty in tray1 or manual feeder. / Paper is loaded in tray but the machine detects empty status. |
| Remedy: | 1) Load the paper in tray1 or manual feeder. 2) If the problem persists, check the following. 3) Check if the empty actuator works normally. If it is defective or broken, replace it. 4) If the actuator operation is OK, check the empty sensor. Reconnect the sensor connector. If the sensor is defective, replace it. |
| Error code: | M2-1110 |
| Display: | Paper Jam inside machine. |
| Description: | Paper jam inside of machine. Please remove the paper |
| Causes: | A paper jam was detected at the feed sensor. |
| Remedy: | 1) Remove the jammed paper. If the error persists, check the followings. 2) Check if the feed/regi sensor connector is connected properly. Reconnect the harness. 3) Check if the regi./feed actuator works normally. If it is defective or broken, replace it. 4) If the photo sensor is defective, replace the regi/feed sensor PBA. |
| Error code: | M2-2110, M2-2310 |
| Display: | Paper Jam top of duplex Paper Jam bottom of duplex |
| Description: | Paper jam at the top of duplex path Paper jam at the bottom of duplex path |
| Causes: | A paper jam was detected in the duplex area. |
| Remedy: | 1) Remove the jammed paper. 2) Check if the paper in tray is loaded properly. Adjust the guide. Check the machine setting is normal for paper. 3) Check if the Guide-Change Duplex of the rear cover is defective or broken. Check if the rib form of the rear cover is normal. |
| Error code: | M3-1110, M3-1112 |
| Description: | Paper jam in exit area. Please remove the paper |
| Causes: | A paper jam was detected in the exit area. |
| Remedy: | 1) Open the rear cover. Remove the jammed paper. 2) Check if the Guide-Change Duplex of the rear cover is defective. 3) Check if the exit sensor and actuator is working normally. |
| Error code: | M3-2130 |
| Display: | Output bin full Remove paper |
| Description: | Paper in output bin is full. Remove printed paper |
| Causes: | The machine detected that the output tray has got full or the bin-full sensor is defective. |
| Remedy: | 1) Remove the paper on the output tray. (The maximum loading capacity is 150 sheets based on standard paper (80 g/m²).) 2) Check if the Bin-full Sensor connector is connected properly. Reconnect it or replace the Bin-full sensor. |
| Error code: | S1-3212, S1-2000 |
| Description: | Error #S1–3212 Turn off then on. |
| Causes: | The main board does not work normally. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, replace the main board. |
| Error code: | S2-4110 |
| Display: | Door is open. Close it. |
| Description: | Door is open. Close it. |
| Causes: | Door is open or the cover open switch is defective. |
| Remedy: | 1) Check if the front cover is closed perfectly. 2) Check if the connection between the main board and HVPS board is correct. 3) Check if the cover open switch on HVPS board is operated properly. If it is defective, replace the HVPS board. |
| Error code: | S6-3123 |
| Display: | This IP address conflicts with that of other system. Check it. |
| Description: | This IP address conflicts with that of other system. Check it. |
| Causes: | Network has some problem. (IP address conflicts with that of other system. / Communication error / There is no response when checking the ping test.) |
| Remedy: | Change the machine’s IP address. • Execute the Samsung Easy Printer Manager program. (Device setting > Network > IP address). Change the IP address. • In case of DHCP or Bootp, reboot the machine to receive a new IP address. |
| Error code: | S6-3210, S6-3231, S6-3232 |
| Description: | Network Failure: #S6-3210. Turn off then on. Call for service if the problem persists. |
| Causes: | Wireless network has some problem. |
| Remedy: | 1) Turn the machine off then on. 2) Check the wireless network setting. If the setting in printer and AP device is abnormal, change it and retry the job. 3) Check if the connection between the main board and WLAN PBA is normal. Reconnect the harness. 4) If the harness connection is OK, replace the WLAN PBA. |
| Error code: | S6-3233, S6-3234 |
| Description: | Network Failure: #S6-3210. Turn off then on. Call for service if the problem persists. |
| Causes: | Wireless network has some problem. |
| Remedy: | 1) Turn the machine off then on. 2) Check the wireless network setting. If the setting in printer and AP device is abnormal, change it and retry the job. 3) Check if the connection between the main board and WLAN PBA is normal. Reconnect the harness. 4) If the harness connection is OK, replace the WLAN PBA. |
| Error code: | S6-3235, S6-3236 |
| Description: | Network Failure: #S6-3210. Turn off then on. Call for service if the problem persists. |
| Causes: | Wireless network has some problem. |
| Remedy: | 1) Turn the machine off then on. 2) Check the wireless network setting. If the setting in printer and AP device is abnormal, change it and retry the job. 3) Check if the connection between the main board and WLAN PBA is normal. Reconnect the harness. 4) If the harness connection is OK, replace the WLAN PBA. |
| Error code: | U1-2132, U1-23xx |
| Description: | Fuser Unit Failure: #U1-2xxx. Turn off then on. Call for service if the problem persists |
| Causes: | The temperature control of fuser unit is abnormal. |
| Remedy: | 1) Turn the machine off. Re-install the fuser unit. Then turn the machine on. Is the error message is disappeared? 2) If the problem persists, turn the machine off and remove the fuser unit. a) Check if the fuser connector is connected properly. b) Check if the input voltage is normal. c) Check if the thermistor is twisted or contaminated; and is in contact with the Heat Roller. 3) After confirming continuity in the fuser connector and the problem still exists; order an SMPS and Fuser Unit and install as is necessary. |
| Error code: | U2-1112, U2-1113 |
| Display: | LSU Unit Failure #U2-1112. Turn off then on. LSU Unit Failure #U2-1113. Turn off then on. |
| Description: | LSU Failure: #U2-111x. Turn off then on. Call for service if the problem persists |
| Causes: | LSU Motor does not work normally. / H Sync signal is abnormal. |
| Remedy: | 1) Execute the LSU motor test in EDC program. Check the LSU motor operation sound. 2) If there is no sound, remove the right cover. Check if the LSU harness on the main board is connected properly. 3) If it is OK, remove the top cover. Check if the LSU harness on LSU board is connected properly. (picture- 3,4) 4) Check if the LSU harness is defective. (picture- 5,6) 5) Reconnect the LSU harness and then execute the LSU motor test in EDC program again. 6) If the problem persists, replace the LSU. 7) If the problem persists after replacing LSU, replace the main board. |
