Canon imageCLASS LBP222dn
Рейтинг
Модули
EXTERNAL COVERS, PANELS, ETC.
INTERNAL COMPONENTS 3
INTERNAL COMPONENTS 4 LBP228, LBP227
CONTROL PANEL ASSY 5-LINE CONTROL PANEL model
INTERNAL COMPONENTS 4 LBP226, LBP223
INTERNAL COMPONENTS 1
INTERNAL COMPONENTS 2
CONTROL PANEL ASSY 5-INCH TOUCH PANEL model
Детали EXTERNAL COVERS, PANELS, ETC.
Деталь: | COVER, TOP |
Парткод: | FE8-6190-000 |
Деталь: | TRAY, PAPER DELIVERY |
Парткод: | FE8-6191-000 |
Деталь: | COVER, LEFT |
Парткод: | FE8-6202-000 |
Деталь: | COVER, LEFT REAR |
Парткод: | FE8-6203-000 |
Деталь: | COVER, CASSETTE, REAR |
Парткод: | FE8-6208-000 |
Деталь: | SHEET, HANDSET |
Парткод: | FL1-0525-000 |
Цена: | 800 ₽ |
Деталь: | RIGHT COVER ASSY |
Парткод: | FM1-R680-000 |
Деталь: | CARTRIDGE DOOR ASSY |
Парткод: | FM1-W114-000 |
Деталь: | REAR DOOR ASSY |
Парткод: | FM1-R685-000 |
Деталь: | LABEL, CASSETTE OPERATOR |
Парткод: | FU2-2392-000 |
Деталь: | LABEL, HIGH TMP. CAUTION |
Парткод: | FU2-2393-000 |
Деталь: | SHEET, DAMPER |
Парткод: | RC2-6075-000 |
Деталь: | SHAFT, SUPPORT |
Парткод: | RC4-3002-000 |
Деталь: | LINK, PRESSURE RELEASE |
Парткод: | RC4-4479-000 |
Деталь: | SCREW, TAP, M3X6 |
Парткод: | XA9-1503-000 |
Цена: | 340 ₽ |
Деталь: | SCREW, D, M3X8 |
Парткод: | XA9-1671-000 |
Цена: | 170 ₽ |
Деталь: | HOLDER, TRANSFER ROLLER, RIGHT |
Парткод: | RC4-3133-000 |
Деталь: | HOLDER, TRANSFER ROLLER, LEFT |
Парткод: | RC4-3134-000 |
Деталь: | ROLLER, MULTI-PURPOSE |
Парткод: | RL2-0656-000 |
Деталь: | PAD, MULTI-PURPOSE SEPARATION |
Парткод: | RL2-0657-000 |
Деталь: | ROLLER, TRANSFER |
Парткод: | RM1-4023-000 |
Деталь: | FOOT, REAR, RIGHT |
Парткод: | RM2-5423-000 |
Деталь: | FOOT, REAR, LEFT |
Парткод: | RM2-5429-000 |
Деталь: | PAPER PICK-UP ROLLER ASSY |
Парткод: | RM2-5452-000 |
Деталь: | REGISTRATION ASSY |
Парткод: | FM1-N761-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | RU8-2935-000 |
Деталь: | PLATE, GROUNDING |
Парткод: | FE8-6628-000 |
Деталь: | PLATE, GROUNDING |
Парткод: | FE8-7079-000 |
Деталь: | MODULE, WLAN |
Парткод: | FK4-6029-000 |
Деталь: | CABLE, FLEXIBLE FLAT |
Парткод: | FK4-4931-000 |
Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
Парткод: | FM2-K828-000 |
Деталь: | SCREW, TAP, M3X6 |
Парткод: | XA9-1503-000 |
Цена: | 340 ₽ |
Деталь: | SCREW, D, M3X6 |
Парткод: | XA9-1670-000 |
Деталь: | CONTROL PANEL ASSY |
Парткод: | FM1-T095-000 |
Деталь: | CONTROL PANEL ASSY |
Парткод: | FM1-T096-000 |
Деталь: | CABLE, GROUNDING |
Парткод: | FM1-X968-000 |
Деталь: | PLATE, GROUNDING |
Парткод: | FE8-6628-000 |
Деталь: | PLATE, GROUNDING |
Парткод: | FE8-7079-000 |
Деталь: | MODULE, WLAN |
Парткод: | FK4-6029-000 |
Деталь: | CABLE, FLEXIBLE FLAT |
Парткод: | FK4-4931-000 |
Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
Парткод: | FM2-K829-000 |
Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
Парткод: | FM2-K832-000 |
Деталь: | SCREW, TAP, M3X6 |
Парткод: | XA9-1503-000 |
Цена: | 340 ₽ |
Деталь: | SCREW, D, M3X6 |
Парткод: | XA9-1670-000 |
Деталь: | CABLE, FLEXIBLE FLAT |
Парткод: | FK4-4929-000 |
Деталь: | L.V. POWER SUPPLY PCB ASSY |
Парткод: | FM2-D989-000 |
Деталь: | L.V. POWER SUPPLY PCB ASSY |
Парткод: | FM2-D990-000 |
Деталь: | DC CONTROLLER PCB ASSY |
Парткод: | FM2-M825-000 |
Деталь: | FAN |
Парткод: | RK2-1378-000 |
Деталь: | CABLE, FLEXIBLE FLAT, LASER |
Парткод: | RK2-9901-000 |
Деталь: | TAG CABLE ASSY |
Парткод: | RM2-2556-000 |
Деталь: | LASER SCANNER ASSY |
Парткод: | RM2-2891 -000 |
Деталь: | H.V. POWER SUPPLY PCB ASSY |
Парткод: | RM2-7508-000 |
Деталь: | CONNECTING PCB ASSY |
Парткод: | RM2-7510-000 |
Деталь: | SCREW, W/WASHER, M3X8 |
Парткод: | XA9-1420-000 |
Цена: | 1 100 ₽ |
Деталь: | SCREW, TAP, M3X6 |
Парткод: | XA9-1503-000 |
Цена: | 340 ₽ |
Деталь: | SCREW, D, M3X6 |
Парткод: | XA9-1670-000 |
Деталь: | SCREW, D, M3X8 |
Парткод: | XA9-1671-000 |
Цена: | 170 ₽ |
Деталь: | LEVER, SWITCH |
Парткод: | FE8-6227-000 |
Деталь: | CASSETTE ASSY |
Парткод: | FM1-R683-000 |
Деталь: | POWER SWITCH PCB ASSY |
Парткод: | FM1-Z945-000 |
Деталь: | LABEL, CST. PAPER SIZE |
Парткод: | FU2-1855-000 |
Деталь: | COVER, FULL DETECT SENSOR |
Парткод: | RC4-3219-000 |
Деталь: | CASSETTE SEPARATION ASSY |
Парткод: | RM2-5397-000 |
Деталь: | FIXING ASSY (220-240V) |
Парткод: | FM1-W115-000 |
Деталь: | FIXING ASSY (220-240V) |
Парткод: | FM1-W116-000 |
Деталь: | MAIN MOTOR ASSY |
Парткод: | RM2-8684-000 |
Деталь: | SCREW, TAP, M3X6 |
Парткод: | XA9-1503-000 |
Цена: | 340 ₽ |
Деталь: | SCREW, M3X6 |
Парткод: | XA9-1522-000 |
Деталь: | COVER, PANEL, REAR UPPER |
Парткод: | FE8-6209-000 |
Деталь: | COVER, PANEL, REAR LOWER |
Парткод: | FE8-6210-000 |
Деталь: | COVER, PANEL, LOWER |
Парткод: | FE8-6211-000 |
Деталь: | GUIDE, CABLE |
Парткод: | FE8-6212-000 |
Деталь: | COVER, PANEL, UPPER |
Парткод: | FE8-6217-000 |
Деталь: | COVER, PANEL, LOWER |
Парткод: | FE8-6218-000 |
Деталь: | COVER, PANEL, LEFT |
Парткод: | FE8-6219-000 |
Деталь: | COVER, PANEL, RIGHT |
Парткод: | FE8-6220-000 |
Деталь: | COVER, PANEL, FRONT |
Парткод: | FE8-6360-000 |
Деталь: | PLATE, GROUNDING |
Парткод: | FE8-7096-000 |
Деталь: | COVER, PANEL, REAR |
Парткод: | FE8-7086-000 |
Деталь: | CABLE, HDMI |
Парткод: | FK4-4933-000 |
Деталь: | CONTROL PANEL ASSY |
Парткод: | FM1-R686-000 |
Деталь: | USB RELAY PCB ASSEMBLY |
Парткод: | FM1-R870-000 |
Цена: | 3 400 ₽ |
Деталь: | HINGE ASSEMBLY |
Парткод: | FM1-T109-000 |
Деталь: | SCREW, TAP, M3X6 |
Парткод: | XA9-1503-000 |
Цена: | 340 ₽ |
Коды ошибок
10-0100
10-0404
E000-0000
E001-0000
E003-0000
E004-0000
E014-0000
E014-0001
E015-0002
E066-0000
E110-0000
E110-0001
E196-0000
E196-1000
E196-2000
E196-3000
E196-3001
E197-0002
E246-0000 ... E350-0000
E351-0000
E354-0000 ... E355-0005
E719-0000
E732-0000
E733-0000
E743-0000
E744-0001
E744-0002
E744-1001
E744-4000
E744-5000
E744-6000
E744-7000
E746-0000
E766-8000
E766-9000
E805-0001
Описание
Error code: | 10-0100 |
Description: | Unidentified Toner Cartridge replacement notification alarm (C) |
Causes: | Detail Code: 0184 |
Remedy: | When the replacement with a non-genuine Toner Cartridge was detected. |
Error code: | 10-0404 |
Description: | Toner Cartridge empty alarm (Bk) |
Causes: | Alarm to be generated once the Toner Cartridge becomes empty. |
Error code: | E000-0000 |
Description: | Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control. |
Causes: | The detection temperature of the main thermistor did not increase after start of the power distribution to the heater. |
Remedy: | - Check the fixing film connector. - Replace the fixing film unit. - Replace the DC controller PCB. |
Error code: | E001-0000 |
Description: | Abnormally high temperature (detected by main thermistor) The main thermistor detected an abnormally high temperature 235 deg C) during temperature control |
Causes: | The main thermistor detected a temperature of higher than 255 degree C. |
Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
Error code: | E003-0000 |
Description: | Abnormally low temperature (detected by main thermistor) After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
Causes: | The main thermistor detected a temperature of lower than 120 degree C for more than 1 second when 20 seconds elapsed after start of the power distribution to the heater. |
Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
Error code: | E004-0000 |
Description: | Fixing power supply drive circuit error |
Causes: | 43 to 57Hz could not be detected continuously for more than 5 seconds when zero cross detection started. |
Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Replace the DC Controller Board. (2) Replace the Fixing Assembly. |
Error code: | E014-0000 |
Description: | Fixing motor failure |
Causes: | Fixing motor startup error The target speed was not reached within a specified time after startup of the motor. |
Remedy: | Check the contact of the connector between the fixing motor (J516) and the DC controller PCB (J81). Check the gear between the fixing motor and the fixing assembly. Replace the fixing motor. |
Error code: | E014-0001 |
Description: | Fixing motor failure |
Causes: | Fixing motor rotation error The motor rotated out of the target speed during rotation after the target speed was reached. |
Remedy: | Check the contact of the connector between the fixing motor (J516) and the DC controller PCB (J81). Check the gear between the fixing motor and the fixing assembly. Replace the fixing motor. |
Error code: | E015-0002 |
Description: | Cassette 2 lift up motor error |
Causes: | Cassette 2 lift up motor error |
Remedy: | Reconnect the connector J2003 on the paper feeder driver PCB and the relay connector J702. Check the paper feeder media stack surface sensor in the sensor monitor mode. If a failure is found, replace the pickup unit. Reconnect the connector J2006 on the paper feeder driver PCB. Replace the lifter drive unit. |
Error code: | E066-0000 |
Description: | Environment sensor failure |
Causes: | Environment sensor failure |
Remedy: | Replace the environment sensor. |
Error code: | E110-0000 |
Description: | Optical assembly error (Scanner motor) |
Causes: | Optical assembly error (Scanner motor initial operation failure) |
Remedy: | Check the contact of the connector between the laser scanner unit and the DC controller. Replace the laser scanner unit. |
Error code: | E110-0001 |
Description: | Optical assembly error (Scanner motor) |
Causes: | Optical assembly error (Scanner motor rotation failure) |
Remedy: | Check the contact of the connector between the laser scanner unit and the DC controller. Replace the laser scanner unit. |
Error code: | E196-0000 |
Description: | Invalid RFU execution requested |
Causes: | D-con update for the host machine or the optional cassette is not completed. |
Error code: | E196-1000 |
Description: | Main Controller PCB reading/writing error Error in reading/writing of main program in the Main Controller PCB |
Causes: | Error in writing in / reading from ROM (main) Cause: Problem in main controller PCB |
Remedy: | 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB. |
Error code: | E196-2000 |
Description: | ROM read/write error (Error in storing each setting values for user mode / service mode / factory mode) |
Causes: | Error in writing in/reading from ROM (storing settings) Cause: Problem in main controller PCB |
Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Update the set of the Controller Firmware (2) Replace the Main Controller Board. |
Error code: | E196-3000 |
Description: | ROM writing/reading error (eMMC) |
Causes: | Unable to read/write data from the eMMC. The eMMC failure occurred. |
Remedy: | 1. Update the firmware. 2. Replace the Main Controller PCB (UN30). |
Error code: | E196-3001 |
Description: | ROM-ID mismatch (eMMC) |
Causes: | The eMMC was replaced incorrectly. The eMMC failure occurred. |
Remedy: | 1. Update the firmware. 2. Replace the Main Controller PCB (UN30). |
Error code: | E197-0002 |
Description: | Firmware error |
Causes: | Unknown engine firmware error |
Remedy: | 1. Turn OFF and then ON the power. 2. Update firmware. 3. Replace the DC Controller PCB. |
Error code: | E246-0000 ... E350-0000 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E351-0000 |
Description: | Main controller PCB fault |
Causes: | Internal error of the main controller PCB Cause Main controller PCB fault. |
Remedy: | - Check the connection of main controller PCB. - Replace main controller PCB. |
Error code: | E354-0000 ... E355-0005 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E719-0000 |
Description: | Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
Causes: | Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
Remedy: | - Check the connectors of the card reader and image processor PCB. - Replace the card reader for normal connection. - Replace the image processor PCB. |
Error code: | E732-0000 |
Description: | Scanner communication error. |
Causes: | Scanner communication error |
Remedy: | 1. Install the set of the controller firmware. 2.Replace the Main Controller PCB (UN30). |
Error code: | E733-0000 |
Description: | Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
Causes: | Printer communication error (communication error at initial communication and negotiation packet error) |
Remedy: | - Check the connectors of the DC controller PCB and image processor PCB for normal connection. - Check the power supply of the printer (Check whether initialization is performed at startup). - Replace the DC controller PCB or image processor PCB. |
Error code: | E743-0000 |
Description: | Error in main controller communication An error in reading of/writing to the Flash ROM in the Main Controller occurred. |
Causes: | Software sequence error |
Remedy: | 1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB. |
Error code: | E744-0001 |
Description: | Language file/boot ROM/USB memory error The language file version does not match Bootable. |
Causes: | Language file version error The language file version does not match Bootable. |
Remedy: | Download a language file of the correct version. |
Error code: | E744-0002 |
Description: | Language file/boot ROM/USB memory error The language file is longer than the permitted size. |
Causes: | Language file size error The language file is longer than the permitted size. |
Remedy: | Download a language file of the correct version. |
Error code: | E744-1001 |
Description: | Firmware version error Version of the main program and the version of the start-up program was not matched. |
Causes: | Versions of Bootable and BootRom do not match |
Remedy: | Install the set of the controller firmware. |
Error code: | E744-4000 |
Description: | Engine ID error (Invalid engine connection is detected) |
Causes: | Error in engine ID Detected illegal engine connection |
Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Check the DC Controller Board. (2) Update the Engine Firmware. (3) Update the set of the Controller Firmware |
Error code: | E744-5000 |
Description: | Error in the Control Panel PCB Error in the Control Panel PCB (microcomputer). |
Causes: | Error in panel microcomputer |
Remedy: | 1. Check the Control Panel PCB, and install the firmware (PANEL). 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB. |
Error code: | E744-6000 |
Description: | Communication error with Wireless LAN board. |
Causes: | Communication with the Wireless LAN PCB could not be established. |
Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Replace the Wireless LAN Board. (4) Replace the Main Controller Board. |
Error code: | E744-7000 |
Description: | Main Controller PCB error An error in the microcomputer which retains fax job information of the Main Controller PCB. |
Causes: | An error in the microcomputer which retains fax job information of the Main Controller PCB. |
Remedy: | 1. Install the firmware of BKUP. 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB. |
Error code: | E746-0000 |
Description: | Main Controller PCB error Main Controller communication error occurred (other than scan). |
Causes: | Communication error occurred in main controller PCB (other than scannerrelated) Cause: Problem in main controller PCB |
Remedy: | 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB. |
Error code: | E766-8000 |
Description: | Digital registration error Information at digital registration could not be obtained. |
Causes: | Incorrect digital registration 3 point information Cause: Problem in firmware |
Remedy: | 1. Install the Engine Controller firmware. 2. Install the set of the controller firmware. 3. Replace the Engine Controller PCB. |
Error code: | E766-9000 |
Description: | Scanner power state error An error was detected in power state of the Laser Scanner Unit. |
Causes: | Error in laser scanner unit power supply Cause: Problem in firmware |
Error code: | E805-0001 |
Description: | Error in duplex cooling fan |
Causes: | Fan 1 failure |