Xerox Phaser 3260DI
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
30000
Цветность печати
черно-белая
Общие характеристики |
|
---|---|
Тип устройства |
Принтер |
Цветность печати |
|
Тип |
лазерный/светодиодный |
Технология печати |
лазерная |
Сканер |
|
Факс |
|
Размещение |
настольный |
Телефон |
|
Печать фотографий |
|
Макс. формат |
A4 |
Копир |
|
Число страниц в месяц |
30 000 |
Область применения |
малый офис |
Принтер |
|
Печать без полей |
|
Пигментные чернила |
|
Количество цветов |
1 |
Время разогрева |
14 |
Макс, длина отпечатка |
297 |
Макс, ширина отпечатка |
216 |
Прямая печать |
|
Двусторонняя печать |
|
Макс, разрешение для ч/б печати |
|
По Y | 600 |
По X | 600 |
Скорость цветной печати |
|
A4 | 28 |
Время выхода первого отпечатка |
|
Ч/б | 8,5 |
Сканер |
|
Стандарт WIA |
|
Стандарт TWAIN |
|
Отправка изображения по e-mail |
|
Слайд-адаптер |
|
Расходные материалы |
|
Ресурс ч/б картриджа/тонера |
3 000 |
Количество картриджей |
1 |
Печать на: |
|
Фотобумаге | |
CD/DVD | |
Рулоне | |
Карточках | |
Конвертах | |
Глянцевой бумаге | |
Матовой бумаге | |
Этикетках | |
Пленках | |
Плотность бумаги |
|
Максимальная | 220 |
Минимальная | 60 |
Факс |
|
Цветной |
|
Телефон |
|
Caller ID |
|
Спикерфон |
|
Стандарт DECT |
|
Автоответчик |
|
АОН |
|
Беспроводная трубка |
|
Проводная трубка |
|
Шрифты и языки управления |
|
Языки управления |
|
PCL 5c | |
PostScript 2 | |
PPDS | |
PostScript 3 | |
PCL 6 | |
PCL 5e | |
PostScript | |
Количество установленных шрифтов |
|
PostScript | 136 |
PCL | 111 |
Лотки |
|
Емкость лотка ручной подачи |
1 |
Подача бумаги |
|
Стандартная | 251 |
Максимальная | 150 |
Вывод бумаги |
|
Стандартный | 150 |
Финишер |
|
Брошюровщик |
|
Сортер |
|
Электронная сортировка |
|
Сортировка со сдвигом |
|
Степлер |
|
Интерфейсы |
|
Инфракрасный порт |
|
Ethernet (RJ-45) |
|
RS-232 |
|
Устройство для чтения карт памяти |
|
Веб-интерфейс |
|
LPT |
|
FireWire (IEEE 1394) |
|
Bluetooth |
|
Wi-Fi 802.11n |
|
Wi-Fi |
|
USB |
|
AirPrint |
|
Поддержка iOS |
|
Версия USB |
2,0 |
Память/Процессор |
|
Объем памяти |
256 |
Частота процессора |
600 |
Дополнительная информация |
|
Мин. системные требования |
Intel Pentium II |
Работа от аккумулятора |
|
Экран |
|
Поддержка ОС |
|
Mac OS | |
Linux | |
Windows | |
Потребляемая мощность |
|
В режиме ожидания | 2 |
При работе | 417 |
Уровень шума |
|
При работе | 53 |
В режиме ожидания | 30 |
Габариты |
|
Высота |
214 |
Вес |
7,6 |
Глубина |
335 |
Ширина |
368 |
Модули
COVERS
Paper path
MAIN
Right Main Frame
FRAME
Left Main Frame
Lower Fuser
TOP COVER
Fuser
Base Pick Up
DUPLEX
CASSETTE
Exit Frame
Детали FRAME
Деталь: | LEFT COVER |
Парткод: | 002N03167 |
Деталь: | RIGHT COVER |
Парткод: | 002N03182 |
Деталь: | REAR COVER ASSEMBLY |
Парткод: | 002N03172 |
Деталь: | FRONT COVER ASSEMBLY |
Парткод: | 002N03175 |
Деталь: | REAR COVER |
Парткод: | P400239969 |
Деталь: | Face Up Cover |
Парткод: | P400239943 |
Деталь: | Change Dup Guide |
Парткод: | P400239944 |
Деталь: | SPRING |
Парткод: | P400239965 |
Деталь: | PHOTO-INTERRUPTER |
Парткод: | P400239957 |
Деталь: | CRUM PBA |
Парткод: | P400239967 |
Деталь: | CRUM Terminal MEA |
Парткод: | P400238352 |
Деталь: | FRONT COVER |
Парткод: | P400239958 |
Деталь: | Manual cover |
Парткод: | P400239947 |
Деталь: | Front Harness Cover |
Парткод: | P400239953 |
Деталь: | CRUM IF Front Harness |
Парткод: | P400239938 |
Деталь: | Earth Transfer Plate |
Парткод: | P400240075 |
Деталь: | BUSHING |
Парткод: | P400239984 |
Деталь: | SPRING |
Парткод: | P400240061 |
Деталь: | Right Push Brush Plate |
Парткод: | P400238326 |
Деталь: | BUSHING |
Парткод: | P400240035 |
Деталь: | Left Push Brush Plate |
Парткод: | P400240022 |
Деталь: | SPRING |
Парткод: | P400239992 |
Деталь: | SPRING |
Парткод: | P400240055 |
Деталь: | M Feed Idle Bushing |
Парткод: | P400239978 |
Деталь: | SCREW |
Парткод: | P400239990 |
Деталь: | Exit Shaft Bushing |
Парткод: | P400240001 |
Деталь: | E-ring |
Парткод: | P400240027 |
Деталь: | Registration Roller |
Парткод: | 022N02797 |
Деталь: | Pickup Frame Base |
Парткод: | P400240017 |
Деталь: | Middle Frame |
Парткод: | P400240065 |
Деталь: | Registration Holder |
Парткод: | P400240029 |
Деталь: | P SAW Plate |
Парткод: | P400240066 |
Деталь: | Feed actuator |
Парткод: | 120N00545 |
Деталь: | Registration Actuator |
Парткод: | 120N00548 |
Деталь: | Feed Sensor PBA |
Парткод: | P400238343 |
Деталь: | SPRING |
Парткод: | P400240038 |
Деталь: | Registration Base Assembly |
Парткод: | P400240014 |
Деталь: | MP |
Парткод: | 050N00681 |
Деталь: | Paper Guide Cover |
Парткод: | P400240074 |
Деталь: | Registration Idle Shaft |
Парткод: | P400240069 |
Деталь: | Registration Idle Roller |
Парткод: | P400240024 |
Деталь: | Manual Left Adjust |
Парткод: | P400240043 |
Деталь: | Manual Right Adjust |
Парткод: | P400240006 |
Деталь: | Lower MP Guide |
Парткод: | P400238348 |
Деталь: | PINION GEAR |
Парткод: | P400240064 |
Деталь: | Roller Cover |
Парткод: | P400240073 |
Деталь: | PIN |
Парткод: | P400240013 |
Деталь: | Idle Roller |
Парткод: | P400240049 |
Деталь: | SPRING |
Парткод: | P400239999 |
Деталь: | Sub-Holder Idle |
Парткод: | P400239979 |
Деталь: | PBA-MAIN-3052 NI (NW / Wifi) (DMO W / NA) |
Парткод: | 140N63706 |
Деталь: | PBA-MAIN-3052 NI (NW / Wifi) (DMO E / Russia/Middle East/ South Africa) |
Парткод: | 140N63707 |
Цена: | 11 800 ₽ |
Деталь: | PBA-MAIN-3260 DI (Dup / Wifi) (DMO W / NA) |
Парткод: | 140N63708 |
Деталь: | PBA-MAIN-3260 DI (Dup / Wifi) (DMO E / Russia/Middle East) |
Парткод: | 140N63709 |
Деталь: | PBA-MAIN- 3260 DNI (Dup / NW / Wifi) (DMO W / NA) |
Парткод: | 140N63710 |
Деталь: | PBA-MAIN- 3260 DNI (Dup / NW / Wifi) (DMO E / Russia/Middle East/ South Africa/Argentina/Peru) |
Парткод: | 140N63711 |
Цена: | 20 800 ₽ |
Деталь: | WNPC PBA |
Парткод: | 140N63727 |
Цена: | 6 300 ₽ |
Деталь: | Right Developer Guide Plate |
Парткод: | - |
Деталь: | CST Rear Guide |
Парткод: | - |
Деталь: | Knock Up Guide |
Парткод: | - |
Деталь: | FOOT |
Парткод: | - |
Деталь: | RIGHT FRAME |
Парткод: | - |
Деталь: | CABLE CLAMP |
Парткод: | - |
Деталь: | SMPS Cover |
Парткод: | - |
Деталь: | Developer Right Guide |
Парткод: | - |
Деталь: | SPRING |
Парткод: | - |
Деталь: | OPC Ground |
Парткод: | - |
Деталь: | SMPS-V2 (220V) |
Парткод: | 105N02300 |
Цена: | 7 400 ₽ |
Деталь: | FLAT CABLE |
Парткод: | 117N01969 |
Деталь: | HVPS |
Парткод: | 105N02301 |
Цена: | 6 500 ₽ |
Деталь: | SMPS-V2 (110V) |
Парткод: | 105N02299 |
Деталь: | Electric clutch |
Парткод: | 121N01247 |
Цена: | 2 300 ₽ |
Деталь: | Electric clutch |
Парткод: | 121N01248 |
Цена: | 2 400 ₽ |
Деталь: | TR Holder |
Парткод: | P400239964 |
Деталь: | Frame Bottom Plate |
Парткод: | P400239972 |
Деталь: | SAW Ground |
Парткод: | P400239955 |
Деталь: | TRANSFER ROLLER |
Парткод: | 022N02803 |
Деталь: | Exit Gear |
Парткод: | P400239962 |
Деталь: | Feed Gear |
Парткод: | P400239942 |
Деталь: | Exit Idle Gear |
Парткод: | P400239952 |
Деталь: | RDCN Exit Gear |
Парткод: | P400239963 |
Деталь: | Joint PBA |
Парткод: | 011N00581 |
Деталь: | Main Exit Frame |
Парткод: | P400239940 |
Деталь: | Paper Path Frame |
Парткод: | P400239946 |
Деталь: | Fuser Plate Frame |
Парткод: | P400239937 |
Деталь: | LSU Bracket Frame |
Парткод: | P400239971 |
Деталь: | Left Main Frame |
Парткод: | P400239950 |
Деталь: | Right Main Frame |
Парткод: | P400239945 |
Деталь: | LSU |
Парткод: | 062N00292 |
Цена: | 11 000 ₽ |
Деталь: | SENSOR |
Парткод: | 130N01758 |
Деталь: | CST Left Rear Guide |
Парткод: | P400240054 |
Деталь: | BLDC Motor |
Парткод: | 127N07865 |
Деталь: | Fuser Drive Out Gear |
Парткод: | P400240048 |
Деталь: | Knock Up Left Guide |
Парткод: | P400240007 |
Деталь: | Left Developer Guide Plate |
Парткод: | P400240008 |
Деталь: | Left Frame |
Парткод: | P400239983 |
Деталь: | Shaft Bushing |
Парткод: | P400240005 |
Деталь: | Idle Feed Gear 2 |
Парткод: | 007N01802 |
Деталь: | Idle Feed Gear 3 |
Парткод: | P400240053 |
Деталь: | BAND |
Парткод: | P400239981 |
Деталь: | Idle Feed Gear |
Парткод: | P400238351 |
Деталь: | Fuser Swing Bushing |
Парткод: | P400240023 |
Деталь: | Hub Clutch Gear |
Парткод: | P400240016 |
Деталь: | RDCN Feed Gear |
Парткод: | P400240025 |
Деталь: | RDCN feed Gear 2 |
Парткод: | P400240031 |
Деталь: | Cam Coupler |
Парткод: | P400239982 |
Деталь: | Coupling Lever A |
Парткод: | P400240052 |
Деталь: | Main drive |
Парткод: | 007N01803 |
Деталь: | HARNESS COVER |
Парткод: | P400240030 |
Деталь: | Fuser Frame |
Парткод: | - |
Деталь: | HEAT ROLLER |
Парткод: | - |
Деталь: | Left bushing |
Парткод: | - |
Деталь: | Right bushing |
Парткод: | - |
Деталь: | GEAR |
Парткод: | - |
Деталь: | ROLLER |
Парткод: | - |
Деталь: | SPRING |
Парткод: | - |
Деталь: | BUSHING |
Парткод: | - |
Деталь: | Left Jam Lever Link |
Парткод: | - |
Деталь: | ANTISTATIC BRUSH |
Парткод: | - |
Деталь: | Jam Holder |
Парткод: | - |
Деталь: | Right Jam Lever Link |
Парткод: | - |
Деталь: | Fuser |
Парткод: | - |
Деталь: | Main Stacker |
Парткод: | P400239948 |
Деталь: | TOP COVER |
Парткод: | P400239966 |
Деталь: | ANTISTATIC BRUSH |
Парткод: | P400239930 |
Деталь: | RX Paper Stacker |
Парткод: | P400239949 |
Деталь: | Bin Full Stacker |
Парткод: | P400239936 |
Деталь: | SPRING |
Парткод: | P400238324 |
Деталь: | Exit cover |
Парткод: | P400239968 |
Деталь: | OPE PBA |
Парткод: | 140N63723 |
Деталь: | Key Holder |
Парткод: | P400239931 |
Деталь: | SHAFT HOLDER |
Парткод: | P400239929 |
Деталь: | TOP COVER ASSEMBLY |
Парткод: | 002N03187 |
Деталь: | Fuser (220V) |
Парткод: | 126N00431 |
Цена: | 9 200 ₽ |
Деталь: | Upper Fuser |
Парткод: | P400240037 |
Деталь: | HALOGEN LAMP |
Парткод: | P400240004 |
Деталь: | Lower Fuser |
Парткод: | P400239977 |
Деталь: | Right Lamp Cap |
Парткод: | P400240019 |
Деталь: | Fuser Exit Drive |
Парткод: | P400240026 |
Деталь: | Left Lamp Cap |
Парткод: | P400240057 |
Деталь: | Fuser Gear Stopper |
Парткод: | P400240034 |
Деталь: | Fuser Rear |
Парткод: | P400240051 |
Деталь: | Fuser Joint Harness |
Парткод: | P400239986 |
Деталь: | THERMOSTAT |
Парткод: | P400240033 |
Деталь: | NTC Thermostat Assembly |
Парткод: | P400239988 |
Деталь: | FUSER COVER |
Парткод: | P400239997 |
Деталь: | EXIT ROLLER |
Парткод: | P400240009 |
Деталь: | SPRING |
Парткод: | P400240020 |
Деталь: | Claw Guide |
Парткод: | P400240002 |
Деталь: | SPRING |
Парткод: | P400239995 |
Деталь: | EXIT ROLLER |
Парткод: | P400239973 |
Деталь: | Exit Shaft |
Парткод: | P400240036 |
Деталь: | Exit Gear |
Парткод: | P400239991 |
Деталь: | BUSHING |
Парткод: | P400240047 |
Деталь: | Rear Guide |
Парткод: | P400239985 |
Деталь: | Exit Idle Roller |
Парткод: | P400240072 |
Деталь: | SPRING |
Парткод: | P400240039 |
Деталь: | Actuator Holder |
Парткод: | P400240015 |
Деталь: | Exit Actuator |
Парткод: | P400239996 |
Деталь: | Fuser (110V) |
Парткод: | 126N00430 |
Деталь: | Duplex Path Sheet |
Парткод: | P400240000 |
Деталь: | Duplex Guide |
Парткод: | P400239975 |
Деталь: | SENSOR |
Парткод: | 130N01758 |
Деталь: | SPRING |
Парткод: | P400240063 |
Деталь: | Empty Actuator |
Парткод: | P400240058 |
Деталь: | Duplex Guide Lever |
Парткод: | P400240012 |
Деталь: | Pick up shaft |
Парткод: | P400240032 |
Деталь: | Pick Up Guide |
Парткод: | P400240070 |
Деталь: | FEED ROLLER |
Парткод: | 022N02802 |
Деталь: | BUSHING |
Парткод: | P400239987 |
Деталь: | One Way Pick Up |
Парткод: | 130N01760 |
Цена: | 950 ₽ |
Деталь: | Pick up holder |
Парткод: | P400239974 |
Деталь: | Idle Pick Up Gear |
Парткод: | P400239976 |
Деталь: | One Way Clutch |
Парткод: | P400240028 |
Деталь: | Mat Retard Roller |
Парткод: | P400240003 |
Деталь: | M Idle Roller |
Парткод: | P400239970 |
Деталь: | PCT-SILP WASHER |
Парткод: | P400239954 |
Деталь: | Idle Roll Shaft |
Парткод: | P400239951 |
Деталь: | TS Spring |
Парткод: | P400239939 |
Деталь: | Duplex Upper Guide |
Парткод: | P400239956 |
Деталь: | Duplex paper guide |
Парткод: | P400239960 |
Деталь: | Duplex Align Bracket |
Парткод: | P400239959 |
Деталь: | Ground Terminal |
Парткод: | P400239961 |
Деталь: | Roller Bushing |
Парткод: | P400239941 |
Деталь: | Rubber Feed Roller |
Парткод: | P400240056 |
Деталь: | Feed Shaft |
Парткод: | P400240042 |
Деталь: | PULLEY |
Парткод: | P400240044 |
Деталь: | F Down Exit Gear |
Парткод: | P400239993 |
Деталь: | Flat Rubber Belt |
Парткод: | P400239994 |
Деталь: | FEED ROLLER |
Парткод: | P400240040 |
Деталь: | Duplex Base frame |
Парткод: | P400240059 |
Деталь: | Duplex Locker |
Парткод: | P400240021 |
Деталь: | Duplex Tray Assembly - set to A4 (DMO-E / Russia/Middle East/ South Africa/Argentina/Peru) |
Парткод: | 022N02795 |
Деталь: | Duplex Tray assembly - set to Letter (DMO-W / NA / Chile) |
Парткод: | 022N02796 |
Деталь: | Knock Up Plate |
Парткод: | P400239998 |
Деталь: | Cassette Pad |
Парткод: | P400240071 |
Деталь: | SPRING |
Парткод: | P400240046 |
Деталь: | PINION GEAR |
Парткод: | P400240062 |
Деталь: | CASSETTE COVER |
Парткод: | P400239980 |
Деталь: | Sub Retard Cassette |
Парткод: | 050N00683 |
Деталь: | Left Adjust Guide |
Парткод: | P400238345 |
Деталь: | Locker Plate |
Парткод: | P400238337 |
Деталь: | SPRING |
Парткод: | P400238350 |
Деталь: | Cassette Locker |
Парткод: | P400240128 |
Деталь: | SPRING |
Парткод: | P400240076 |
Деталь: | Right Cassette Guide |
Парткод: | P400240107 |
Деталь: | Cassette handle |
Парткод: | P400240156 |
Деталь: | Cassette Rear Guide |
Парткод: | P400240078 |
Деталь: | CASSETTE FRAME |
Парткод: | P400240082 |
Деталь: | Cassette handle |
Парткод: | P400240121 |
Деталь: | PAPER INDICATOR |
Парткод: | P400240088 |
Деталь: | CASSETTE |
Парткод: | 050N00682 |
Деталь: | Bin full sensor |
Парткод: | 130N01758 |
Деталь: | HARNESS |
Парткод: | P400240067 |
Деталь: | Exit Shaft Bushing |
Парткод: | 006N01361 |
Цена: | 130 ₽ |
Деталь: | Exit Frame |
Парткод: | P400240045 |
Деталь: | EXIT ROLLER |
Парткод: | 001N00546 |
Цена: | 800 ₽ |
Деталь: | Decurler Roller |
Парткод: | P400240050 |
Деталь: | Exit Shaft |
Парткод: | P400240060 |
Деталь: | Rubber Exit Dup |
Парткод: | P400239989 |
Деталь: | EXIT ROLLER |
Парткод: | P400240068 |
Деталь: | Main Exit Roller |
Парткод: | P400240041 |
Деталь: | Exit Down Holder |
Парткод: | P400240018 |
Деталь: | SPRING |
Парткод: | P400240010 |
Деталь: | Exit Frame Assembly |
Парткод: | P400240011 |
Коды ошибок
01-100
03-410
03-450
03-900
04-500
06-100, 06-200
07-110
07-130
07-500
07-530
08-100
08-500
08-600
08-700
09-100
09-300
09-350
09-400
09-550
09-800
09-900
10-100
10-200, 10-300
17-100
17-310
17-700, 10-710
17-800, 10-810
17-900
17-910
Описание
Error code: | 01-100 |
Display: | Door is open Close it |
Description: | Door Open RAP 01-100 The machine has detected that the right cover assembly is open. When the cover is open, there is no +24V supply to the motors or the HVPS. |
Causes: | The machine has detected that the front door is open. When the front door is open there is no +24V supply to the motors or the HVPS. |
Remedy: | 1. Switch off the machine, then switch on the machine. 2. Check that the interlock switch actuator on the right cover assembly, PL 7.30 Item 1 is not missing or damaged. 3. Check that the right cover assembly closes correctly. 4. Enter dC330 code 01-100. Check the side cover interlock switch assembly (S01-100), PL 4.15 Item 12. 5. Check the wiring between the side cover interlock switch and CN8 on the Main PWB. If necessary, install a side cover interlock switch assembly, PL 4.15 Item 12. 6. If necessary, install a new main PWB, PL 1.10 Item 1. |
Error code: | 03-410 |
Display: | Load A4 in Tray 1 or Paper mismatch in Tray 1 |
Description: | Paper Color mismatch. Paper Type mismatch. Paper Size mismatch. If printing from PC, ensure print driver and tray guide settings match. Verify tray guide settings. |
Causes: | • Main Board (Phaser 3320) (WorkCentre 3315/3325) |
Remedy: | • Load the correct media in the source tray. • Check paper settings for the affected tray and print driver. • Check tray guide settings. • If problem persists use the following procedure. 1. Check the Feed Sensor and Paper Empty Actuator are installed correctly. Does the error persist? Go to step 2. Complete. 2. Replace the Main Board. Complete. |
Error code: | 03-450 |
Display: | Load A4 In Bypass or Paper mismatch Tray 1 Load [A4] [Plain] |
Description: | Bypass Tray Paper Information Mismatch |
Causes: | The machine has detected a bypass tray paper colour, type or size mismatch during a print job. |
Remedy: | 1. If the fault is present when printing, check that the print driver and machine tray information are correct. 2. Go to GP 4 System Administration Tools. Check that the relevant tray paper type, colour and size settings are correct. |
Error code: | 03-900 |
Description: | GUI to MCB Communications Fault RAP 03-900 A user interface to main PWB communications error has been detected |
Causes: | A user interface to main PWB communications error has been detected. |
Remedy: | 1. Switch off the machine, then switch on the machine. 2. Check the wiring between CN2 on the Main PWB and CN7 on the UI PWB. 3. Install new components as necessary: • UI PWB, PL 2.10 Item 4. • Main PWB, PL 1.10 Item 1. |
Error code: | 04-500 |
Display: | Motor Error Turn off then on |
Description: | Main Motor Locked RAP 04-500 The machine has detected that the main BLDC motor is not being controlled. |
Causes: | • Main Drive Motor • Main Board Phaser 3320 WorkCentre 3315/3325 |
Remedy: | 1. Switch off the machine, then switch on the machine. 2. Remove the toner module, PL 9.10 Item 2, then the xerographic module, PL 9.10 Item 1. Enter dC330 code 04-100. Check that the main BLDC motor (MOT04-100), PL 4.20 Item 2 runs. 3. Check the wiring between the main BLDC motor and CN9 on the Main PWB. 4. If necessary, install new components: • Main BLDC motor, PL 4.20 Item 2. • Main PWB, PL 1.10 Item 1. |
Error code: | 06-100, 06-200 |
Description: | LSU Error RAP 06-100 The machine has detected that the LSU did not reach a ready state within the correct time. 06-200 The machine did not detect the laser beam within the correct time. |
Causes: | 06-100 The machine has detected that the LSU did not reach a ready state within the correct time. 06-200 The machine did not detect the laser beam within the correct time. |
Remedy: | 1. Switch off the machine, then switch on the machine. 2. Enter dC330 codes 06-100 and 06-110. Check that the LSU motor is up to the required speed. 3. Check the wiring between the LSU and CN5 on the Main PWB. 4. Install new components as necessary: • LSU, PL 6.10 Item 1. • Main PWB, PL 1.10 Item 1. |
Error code: | 07-110 |
Display: | Tray 1 Empty |
Description: | Paper Empty at Tray 1 RAP 07-110 The machine has detected that tray 1 is empty. |
Causes: | The machine has detected that tray 1 is empty. |
Remedy: | 1. Remove tray 1. Check that the tray 1 paper empty sensor actuator, PL 8.10 Item 4 moves freely and is not damaged. 2. Replace tray 1. Listen for the tray elevator to raise the knock-up plate. If the plate does not rise, check the wiring between the tray 1 elevator motor and CN19 on the Main PWB. If necessary, install new components: • Tray 1 elevator motor, PL 7.15 Item 8. • Tray feed assembly, PL 8.10 Item 1. 3. Enter dC330 code 07-110. Check the tray 1 paper empty sensor (S07-110), PL 8.10 Item 2. 4. Check the wiring between the tray 1 paper empty sensor and CN19 on the Main PWB. If necessary, install a new tray 1 paper empty sensor, PL 8.10 Item 2. 5. If necessary, install new components: • Tray 1 feed assembly, PL 8.10 Item 1. • Main PWB, PL 1.10 Item 1. |
Error code: | 07-130 |
Display: | Paper Jam in Tray 1 |
Description: | Jam 0 From Tray 1 RAP 07-130 The lead edge of the paper failed to actuate the registration sensor within the correct time after paper was fed from tray 1. |
Causes: | The lead edge of the paper failed to actuate the registration sensor within the correct time after paper was fed from tray 1. |
Remedy: | 1. Pull out tray 1. Remove all jammed paper. 2. Check the paper path for damage or obstructions. 3. Check that the registration sensor actuator, PL 8.15 Item 4 moves freely and is not damaged. If necessary, install a new registration sensor actuator assembly, PL 8.15 Item 13. 4. Enter dC330 code 08-500. Check the registration sensor (Q08-500), PL 8.15 Item 8. 5. Check the wiring between the registration sensor and CN13 on the Main PWB. If necessary, install a new registration sensor, PL 8.15 Item 8. 6. Check that the feed sensor actuator, PL 8.15 Item 5 moves freely and is not damaged. If necessary, install a new feed sensor actuator assembly, PL 8.15 Item 14. 7. Enter dC330 code 08-100. Check the feed sensor (Q08-100), PL 8.15 Item 8. 8. Check the wiring between the feed sensor and CN13 on the Main PWB. If necessary, install a new feed sensor, PL 8.15 Item 8. 9. Enter dC330 code 04-100 to run the main BLDC motor. 10. While the main BLDC motor runs, stack the code 08-810 to energize the tray 1 pickup clutch (CL08-810). Check that the tray 1 feed roll, PL 8.10 Item 12 rotates. 11. Check the wiring between the tray 1 pickup clutch and CN13 on the Main PWB. Install new components as necessary, PL 4.20, PL 7.15 and PL 8.10. 12. While the main BLDC motor runs, stack the code 08-850 to energize the registration clutch (CL08-850). Check that the registration roll, PL 4.15 Item 1 rotates. 13. Check the wiring between the registration clutch and CN13 on the Main PWB. Install new components as necessary, PL 4.15 and PL 4.20. 14. Check that the following components are clean and rotate freely, install new components as necessary: • Tray 1 feed roll, PL 8.10 Item 12. • Tray 1 nudger roll, PL 8.10 Item 12. • Tray 1 retard roll, PL 7.15 Item 20. • Registration roll, PL 4.15 Item 1. • Registration roll idler, PL 4.15 Item 7. 15. If necessary, install new components: • Tray feed assembly, PL 8.10 Item 1. • Main PWB, PL 1.10 Item 1. |
Error code: | 07-500 |
Display: | Bypass Empty |
Description: | Paper Empty at Bypass Tray RAP 07-500 The machine has detected a failure to feed from the bypass tray. |
Causes: | The machine has detected a failure to feed from the bypass tray. |
Remedy: | 1. Open the right cover assembly, PL 7.30 Item 1. Check that the paper feed area at the bypass tray is clean. 2. Check the operation of the bypass paper empty sensor actuator, PL 8.20 Item 26. 3. Enter dC330 code 07-510. Check the bypass paper empty sensor (S07-510), PL 8.20 Item 26. 4. Check the wiring between the bypass paper empty sensor and CN21 on the Main PWB. If necessary, install a new bypass paper empty sensor, PL 8.20 Item 26. 5. If necessary, install new components: • Paper transport assembly, PL 8.20 Item 1. • Main PWB, PL 1.10 Item 1. |
Error code: | 07-530 |
Display: | Paper Jam in Bypass |
Description: | Jam 0 From the Bypass Tray RAP The feed sensor failed to actuate within the correct time after paper was fed from the bypass tray. |
Causes: | The registration sensor failed to actuate within the correct time after paper was fed from the bypass tray. |
Remedy: | 1. Switch off the machine, then switch on the machine. 2. Open the right cover assembly, PL 7.30 Item 1. Remove all jammed paper. 3. Check the paper path for damage or obstructions. 4. Check that the feed sensor actuator, PL 8.15 Item 5 moves freely and is not damaged. If necessary, install a new feed sensor actuator assembly, PL 8.15 Item 14. 5. Enter dC330 code 08-100. Check the feed sensor (Q08-100), PL 8.15 Item 8. 6. Check the wiring between the feed sensor and CN13 on the Main PWB. If necessary, install a new feed sensor, PL 8.15 Item 8. 7. Enter dC330 code 04-100 to run the main BLDC motor. 8. While the main BLDC motor runs, stack the code 08-800 to energize the bypass feed clutch (CL08-800). Check that the bypass tray feed roll, PL 8.20 Item 17 rotates. 9. Check the wiring between the bypass feed clutch, PL 8.20 Item 28 and CN21 on the Main PWB. Install new components as necessary, PL 8.20. 10. While the main BLDC motor runs, stack the code 08-850 to energize the registration clutch (CL08-850). Check that the registration roll, PL 4.15 Item 1 rotates. 11. Check the wiring between the registration clutch, PL 4.15 Item 4 and CN13 on the Main PWB. Install new components as necessary, PL 4.15. 12. Check that the following components are clean and rotate freely, install new components as necessary: • Bypass tray feed roll, PL 8.20 Item 17. • Registration roll, PL 4.15 Item 1. • Registration roll idler, PL 4.15 Item 7. 13. If necessary, install new components: • Paper transport assembly, PL 8.20 Item 1. • Main PWB, PL 1.10 Item 1. |
Error code: | 08-100 |
Display: | Jam inside machine |
Description: | Wait Sensor Jam Entry RAP 08-100 The lead edge of the paper failed to actuate the wait sensor within the correct time from feed sensor 1. |
Causes: | The lead edge of the document failed to actuate the fuser exit sensor within the correct time after registration. |
Remedy: | Identify the speed of the machine, refer to SCP 7 Machine features. Perform one of the steps that follow: • If the speed of the machine is 35-55 ppm, go to 08-100A Wait Sensor RAP (35-55 ppm) • If the speed of the machine is 65-90 ppm, go to 08-100B Wait Sensor RAP (65-90 ppm). |
Error code: | 08-500 |
Display: | Jam in exit area |
Description: | Jam 2 RAP 08-500 The trail edge of the document failed to actuate the exit sensor within the correct time after registration. |
Causes: | The trail edge of the document failed to deactuate the exit sensor within the correct time after registration. |
Remedy: | 1. Open the right cover assembly, PL 7.30 Item 1. Remove all jammed paper. 2. Check the paper path for damage or obstructions. 3. Remove the fuser, PL 10.10 Item 4. Check that the exit sensor actuator, PL 10.25 Item 12 moves freely and is not damaged. If necessary, install a new exit sensor actuator, PL 10.25 Item 12. 4. Enter dC330 code 08-600. Check the exit sensor (Q08-600), PL 10.15 Item 2. 5. Check the wiring between the exit sensor and CN6 on the Main PWB. If necessary, install a new exit sensor, PL 10.15 Item 2. 6. Enter dC330 code 10-400. Check that the fuser motor (MOT10-400), PL 10.20 Item 3, runs and drives the fuser rolls and transport roll, PL 10.15 Item 22. 7. Check the wiring between the fuser motor and CN12 on the Main PWB. Install new components as necessary, PL 10.15 and PL 10.25. 8. Enter dC330 code 04-200. Check that the exit motor (MOT04-200), PL 10.20 Item 2, runs and drives the upper exit roll, PL 10.15 Item 23. 9. Check the wiring between the exit motor and CN12 on the Main PWB. Install new components as necessary, PL 10.15 and PL 10.20. 10. Check that the following components are clean and rotate freely: • Upper exit roll, PL 10.15 Item 23. • Lower exit roll, PL 10.15 Item 14. • Transport roll, PL 10.15 Item 22. • Transport roll idlers, PL 10.15 Item 19. 11. Install new components as necessary: • Fuser, PL 10.25 Item 1. • Exit assembly, PL 10.15 Item 1. • Main PWB, PL 1.10 Item 1. |
Error code: | 08-600 |
Display: | Jam bottom of duplex |
Description: | Duplex Jam 0 RAP 08-600 The lead edge of the document failed to actuate the feed sensor within the correct time. |
Causes: | The lead edge of the document failed to actuate the duplex jam 1 sensor within the correct time. |
Remedy: | 1. Open the right hand cover. Remove all jammed paper. 2. Check the paper path for damage or obstructions. 3. Check that the feed sensor actuator, PL 8.15 Item 5 moves freely and is not damaged. If necessary, install a new feed sensor actuator assembly, PL 8.15 Item 14. 4. Enter dC330 code 08-100. Check the feed sensor (Q08-100), PL 8.15 Item 8. 5. Check the wiring between the feed sensor and CN13 on the Main PWB. If necessary, install a new feed sensor, PL 8.15 Item 8. 6. Enter dC330 code 04-100 to run the main BLDC motor. 7. While the main BLDC motor runs, stack the code 08-850 to energize the registration clutch (CL08-850). Check that the registration roll, PL 4.15 Item 1 rotates. 8. Check the wiring between the registration clutch, PL 4.15 Item 4 and CN13 on the Main PWB. Install new components as necessary, PL 4.15. 9. Clean the registration roll, PL 4.15 Item 1 and the registration roll idler, PL 4.15 Item 7. Install new components as necessary. 10. If necessary, install a new main PWB, PL 1.10 Item 1. |
Error code: | 08-700 |
Display: | Output Bin full. Remove Paper |
Description: | Out Bin Full RAP 08-700 The machine has detected that the exit tray is full. |
Causes: | The machine has detected that the exit tray is full. |
Remedy: | 1. Remove all documents from the exit tray. Check that the out bin full sensor actuator, PL 10.15 Item 25 moves freely and is not damaged. 2. Enter dC330 code 08-720. Check the out bin full sensor (Q08-720), PL 10.15 Item 2. 3. Check the wiring between the out bin full sensor and CN6 on the Main PWB. If necessary, install a new out bin full sensor, PL 10.15 Item 2. 4. Enter dC330 code 04-200. Check that the exit motor (MOT04-200), PL 10.20 Item 2, runs and drives the upper exit roll, PL 10.15 Item 23. 5. Check the wiring between the exit motor and CN12 on the Main PWB. Install new components as necessary, PL 10.15 and PL 10.20. 6. If necessary, install new components: • Exit assembly, PL 10.15 Item 1. • Main PWB, PL 1.10 Item 1. |
Error code: | 09-100 |
Display: | Toner Low |
Description: | Toner Low RAP 09-100 The machine has detected that the toner module is almost empty. |
Causes: | The machine has detected that the print cartridge is almost empty. |
Remedy: | 1. No immediate action is necessary. Ensure that a replacement toner module, PL 9.10 Item 2 is in stock. NOTE: The toner low message is based on a pixel count, not a signal from a sensor. It cannot be reset by shaking the toner module. |
Error code: | 09-300 |
Description: | Drum Warning RAP 09-300 The xerographic module is near the end of the design life. The design life is 55,000 print pages. |
Remedy: | 1. No immediate action is necessary. Ensure that a replacement xerographic module, PL 9.10 Item 1 is in stock. |
Error code: | 09-350 |
Display: | Replace Print Cart. |
Description: | Erase Lamp Failure RAP 09-350 The photoreceptor erase lamp has failed. |
Causes: | The print cartridge is near the end of the design life. The design life is 10,000 print pages. |
Remedy: | NOTE: The door interlock switch must be cheated when checking +24V components. Cheat the door interlock switch. Enter dC330 code 09-022, photoreceptor erase lamp. Press start.. Observe the erase lamp. All the LEDs of the erase lamp are lit. Y↓N→Some of the LEDs of the erase lamp are lit. Y↓N→Go to Flag 1. +24V is available at P/J17 pin 1 on the LVPS. Y↓N→Install a new LVPS and base module, PL 1.10 Item 3. Go to Flag 2. +24V is available at P/J41 pin 1. Y↓N→Go to Flag 1. Check the inline fuse. The fuse is good. Y↓N→Install a new fuse, GP 7, PL 1.10 Item 9. If the fuse blows again, go to 01G Fused Distribution Check. Go to: • Go to 01G +24V Distribution RAP. • 01B 0V Distribution RAP. Go to Flag 3. +13V is available at P/J5 pin 14. Y↓N→NOTE: To gain access to the erase lamp wiring, remove the main drive module, (35-55 ppm) PL 4.15 Item 1, (65-90 ppm) PL 4.10 Item 1. Check the wiring, GP 7, from the in-line fuse to P/J41, pin 2. The wiring is good. Y↓N→Repair the wiring. Perform the steps that follow: • Check that the connector PJ41 is located correctly in the IOT frame. • Install a new erase lamp, (35 ppm) PL 9.22 Item 1, (40-90 ppm) PL 9.20 Item 1. Perform OF7 IOT PWB Diagnostics RAP before a new IOT PWB is installed, PL 1.10 Item 2. Install a new erase lamp, (35 ppm) PL 9.22 Item 1, (40-90 ppm) PL 9.20 Item 1. The fault may be intermittent. Perform the steps that follow: • Check the wiring, GP 7 between P/J41 and P/J17 on the LVPS. • Ensure that the P/Js are correctly and securely connected. • Malfunction of the following associated circuits can cause 09-350 faults. – The inverter paper path and Inverter nip solenoid, go to 10-120, 10-121, 10-126 IOT Exit Sensor RAP. – The vacuum transport fan and Registration clutch, go to 10-101A, 10-102A, 10-103A Lead Edge Late to Fuser Exit Sensor RAP. |
Error code: | 09-400 |
Description: | Replace Drum RAP 09-400 The xerographic module has reached the end of the design life of 55,000 print pages |
Remedy: | 1. Install a new xerographic module, PL 9.10 Item 1. 2. Check the wiring between the xerographic module connector, PL 4.15 Item 17 and CN11 on the Main PWB. If necessary, install a new xerographic module connector, PL 4.15 Item 17. 3. Install new components as necessary: • Xerographic module, PL 9.10 Item 1. • Main PWB, PL 1.10 Item 1. |
Error code: | 09-550 |
Display: | Print Cartridge not installed or Install Print Cart. |
Description: | Print Cartridge is not installed. Remove and reseat the Print Cartridge. |
Causes: | • Print Cartridge • HVPS |
Remedy: | • Turn the printer off and then on again. • If the problem persists continue troubleshooting. 1. Reseat the Print Cartridge. Does the error persist? Go to step 2. Complete. 2. Clean the high voltage contacts on the Print Cartridge and frame. Does the error persist? Go to step 3. Complete. 3. Replace the Print Cartridge. Does the error persist? Go to step 4. Complete. 4. Check the high voltage contacts located in the frame behind the HVPS. Are the contacts installed correctly and is spring tension adequate? Replace the HVPS. Repair the contacts. |
Error code: | 09-800 |
Description: | Invalid Toner Cartridge RAP 09-800 The machine has detected an incompatible toner module. |
Remedy: | 1. Ensure that the toner module, PL 9.10 Item 2 is the correct Xerox toner module for the machine. 2. Check the wiring between the CRUM PWB, PL 4.15 Item 15 and CN11 in the Main PWB. 3. Install new components as necessary: • Toner module, PL 9.10 Item 2. • CRUM PWB, PL 4.15 Item 15. • Main PWB, PL 1.10 Item 1. |
Error code: | 09-900 |
Description: | Invalid Drum Cartridge RAP 09-900 The machine has detected an incompatible xerographic module |
Remedy: | 1. Ensure that the xerographic module, PL 9.10 Item 1 is the correct Xerox xerographic module for the machine. 2. Check the wiring between the CRUM PWB, PL 4.15 Item 15 and CN11 in the Main PWB. 3. Install new components as necessary: • Xerographic module, PL 9.10 Item 1. • CRUM PWB, PL 4.15 Item 15. • Main PWB, PL 1.10 Item 1. |
Error code: | 10-100 |
Description: | Fuser Temperature (Open) Fault The temperature of the Fuser is outside of the normal operating range of 383°F ± 5°F (195°C ± 5°C.) |
Remedy: | Power Off the machine and check that the Fuser connection is fully seated. The Fuser connections are OK. Y↓N→Firmly reconnect the Fuser assembly. Switch the power ON. Check for +3.3 VDC to the Thermistor at P/J on Main PWB. The voltage is OK. Y↓N→• Check the wire harness for open or short circuits. • Replace the Main PWB, (PL-XX) Check the voltage to the Over Heat Thermostat. The voltage is OK. Y↓N→• Check for AC line voltage to the LVPS PWB. • Check the wire harness for open or short circuits. • Replace the LVPS PWB (PL-XX) if needed. Check the Heat Lamp for an open circuit. (BSD-XX) Repair or replace the Fuser Assembly as required. (PL-XX) |
Error code: | 10-200, 10-300 |
Description: | Fuser Under/ Over Temperature Fault The temperature of the Fuser is outside of the normal operating range of 383°F ± 5°F (195°C ± 5°C.) |
Remedy: | Enter Diagnostic Mode. Select: [Machine Test, EDC Mode, DC330 Component Control, 109 Fuser Heat, Temp A] to obtain a temperature reading from the Fuser. The Fuser temperature is within normal operating range. Y↓N→Replace the Fuser Assembly (PL-XX) If problem is intermittent, check the circuit of the Fuser Assembly. |
Error code: | 17-100 |
Display: | IP Conflict or Network Problem: IP Conflict. |
Description: | Two devices are trying to use the same IP address. |
Remedy: | 1. Check the TCP/IP Address stored in the printer’s NVM. Is the address correct for the printer? Advise the customer of the address conflict. Enter the correct IP address. |
Error code: | 17-310 |
Description: | Communication Error (Main PWB to Wireless PWB) Fault The machine software has detected a communication error between the Main PWB and the Wireless PWB. |
Remedy: | 1. Ensure that the connectors are fully seated between the Main PWB and the Wireless PWB. 2. If the problem persists, replace parts in the following order: • Flat Cable (PL-XX) • Wireless PWB (PL-XX) • Main PWB (PL-XX) |
Error code: | 17-700, 10-710 |
Description: | BOOTP Error Fault The machine displays the error message “DHCP, or BOOTP, causing a machine communication error. |
Remedy: | 1. Switch Off the power then switch On the power. 2. Check BOOTP and network configuration. |
Error code: | 17-800, 10-810 |
Description: | DHCP Error Fault The machine displays the error message “DHCP, or BOOTP, causing a machine communication error. |
Remedy: | 1. Switch Off the power then switch On the power. 2. Check DHCP and network configuration. |
Error code: | 17-900 |
Display: | 802.1x Network Error |
Description: | 802.1X Authentication Error |
Causes: | The 802.1X authentication failed. |
Remedy: | 1. Ensure that the 802.1X EAP type, username and password for the machine authentication switch and authentication server match. |
Error code: | 17-910 |
Description: | Firmware Upgrade Fault The firmware upgrade aborted due to an invalid file. |
Remedy: | 1. Check the USB connection. 2. Verify that the correct firmware file is being used. Cycle the machine power and repeat upgrade procedure GP 6. |