Xerox Phaser 6120

Рейтинг

Снят с производства

Тип устройства

Принтер

Технология печати

лазерная

Макс. формат

Число страниц в месяц

35000

Скорость печати A4

Цветность печати

цветная

Общие характеристики
Число страниц в месяц	35 000
Область применения	малый офис
Технология печати	лазерная
Цветность печати	цветная
Размещение	настольный
Тип устройства	Принтер
Макс. формат	A4
Сканер
Телефон
Печать фотографий
Копир
Факс
Принтер
Время разогрева	55
Количество цветов	4
Двусторонняя печать
Прямая печать
Печать без полей
Пигментные чернила
Макс, разрешение для ч/б печати
По X	600
По Y	600
По X	2 400
Скорость ч/б печати
A4	20
Время выхода первого отпечатка
Ч/б	13
Цветн,	22
Сканер
Отправка изображения по e-mail
Стандарт TWAIN
Стандарт WIA
Расходные материалы
Ресурс цветного картриджа/тонера	4 500
Ресурс ч/б картриджа/тонера	1 500
Количество картриджей	4
Печать на:
Фотобумаге
CD/DVD
Рулоне
Этикетках
Пленках
Конвертах
Матовой бумаге
Глянцевой бумаге
Карточках
Плотность бумаги
Максимальная	163
Минимальная	75
Факс
Цветной
Телефон
Caller ID
Беспроводная трубка
Проводная трубка
Автоответчик
Стандарт DECT
Спикерфон
АОН
Шрифты и языки управления
Языки управления
PostScript 3
PCL 6
PCL 5e
PostScript
PCL 5c
PostScript 2
PDF
PPDS
Количество установленных шрифтов
PCL	81
PostScript	139
Лотки
Подача бумаги
Максимальная	700
Стандартная	200
Вывод бумаги
Максимальный	200
Стандартный	200
Финишер
Сортер
Брошюровщик
Степлер
Сортировка со сдвигом
Интерфейсы
Версия USB	2,0
USB
LPT
Wi-Fi
Инфракрасный порт
RS-232
Устройство для чтения карт памяти
Ethernet (RJ-45)
FireWire (IEEE 1394)
Bluetooth
Память/Процессор
Объем памяти	128
Макс, объем памяти	640
Частота процессора	300
Дополнительная информация
Мин. системные требования	Intel Pentium II
Поддержка ОС
Mac OS
Linux
Windows
DOS
Потребляемая мощность
В режиме ожидания	35
При работе	450
Уровень шума
При работе	54
В режиме ожидания	35
Габариты
Вес	20,2
Высота	341
Ширина	395
Глубина	442

Модули

(Подача и захват бумаги)

(Узел термозакрепления)

(Электронные компоненты)

(Узел переноса)

Детали None

Деталь:	Ролик подачи бумаги из основного лотка, в сборе
Парткод:	059E05460
Цена:	240 ₽

Деталь:	MEA UNIT-PAPER PATH, ML-2571N,SAMSUNG,-,-
Парткод:	130K74271

Деталь:	CARTRIDGE-TRANSFER
Парткод:	023E30891
Цена:	33 300 ₽

Деталь:	LASER SCANNER ASSY
Парткод:	122K02590

Деталь:	Exit motor (MOT04-200)
Парткод:	127E15260

Деталь:	MOTOR MAIN
Парткод:	127E15270
Цена:	12 900 ₽

Деталь:	PMO-ACTUATOR EXIT
Парткод:	120E29290

Деталь:	Печь, в сборе (220В)
Парткод:	126K23202
Цена:	41 200 ₽

Деталь:	Ролик подачи бумаги из основного лотка, в сборе
Парткод:	059E05460
Цена:	240 ₽

Деталь:	MEA UNIT-PAPER PATH, ML-2571N,SAMSUNG,-,-
Парткод:	130K74271

Деталь:	CARTRIDGE-TRANSFER
Парткод:	023E30891
Цена:	33 300 ₽

Деталь:	LASER SCANNER ASSY
Парткод:	122K02590

Деталь:	Exit motor (MOT04-200)
Парткод:	127E15260

Деталь:	MOTOR MAIN
Парткод:	127E15270
Цена:	12 900 ₽

Деталь:	PMO-ACTUATOR EXIT
Парткод:	120E29290

Деталь:	Печь, в сборе (220В)
Парткод:	126K23202
Цена:	41 200 ₽

Деталь:	Ролик подачи бумаги из основного лотка, в сборе
Парткод:	059E05460
Цена:	240 ₽

Деталь:	MEA UNIT-PAPER PATH, ML-2571N,SAMSUNG,-,-
Парткод:	130K74271

Деталь:	CARTRIDGE-TRANSFER
Парткод:	023E30891
Цена:	33 300 ₽

Деталь:	LASER SCANNER ASSY
Парткод:	122K02590

Деталь:	Exit motor (MOT04-200)
Парткод:	127E15260

Деталь:	MOTOR MAIN
Парткод:	127E15270
Цена:	12 900 ₽

Деталь:	PMO-ACTUATOR EXIT
Парткод:	120E29290

Деталь:	Печь, в сборе (220В)
Парткод:	126K23202
Цена:	41 200 ₽

Деталь:	Ролик подачи бумаги из основного лотка, в сборе
Парткод:	059E05460
Цена:	240 ₽

Деталь:	MEA UNIT-PAPER PATH, ML-2571N,SAMSUNG,-,-
Парткод:	130K74271

Деталь:	CARTRIDGE-TRANSFER
Парткод:	023E30891
Цена:	33 300 ₽

Деталь:	LASER SCANNER ASSY
Парткод:	122K02590

Деталь:	Exit motor (MOT04-200)
Парткод:	127E15260

Деталь:	MOTOR MAIN
Парткод:	127E15270
Цена:	12 900 ₽

Деталь:	PMO-ACTUATOR EXIT
Парткод:	120E29290

Деталь:	Печь, в сборе (220В)
Парткод:	126K23202
Цена:	41 200 ₽

Коды ошибок

18, 19, 1A, 1B

Описание

Парткод

Название

XEROX (023E30890) Ремень переноса

XEROX Копи-картридж / Модуль формирования изображения

XEROX Тонер-картридж голубой (1500 стр.)

XEROX Тонер-картридж желтый (1500 стр.)

XEROX Тонер-картридж пурпурный (1500 стр.)

XEROX Тонер-картридж черный (4500 стр.)

XEROX Тонер-картридж голубой (4500 стр.)

XEROX Тонер-картридж желтый (4500 стр.)

XEROX Тонер-картридж пурпурный (4500 стр.)

XEROX Узел термозакрепления 220V

Error code:	04
Display:	ERROR CONDITION PAPER OUT
Description:	The printer stops; the ERROR light flashes.
Causes:	The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded.
Remedy:	Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration.

Error code:	05
Display:	ERROR CONDITION HEAD OPEN
Description:	The printer stops; the ERROR light flashes.
Causes:	The printhead is not fully closed. The head open sensor is not working properly.
Remedy:	Replace the sensor.

Error code:	08
Display:	WARNING HEAD COLD
Description:	The printer prints while the ERROR light flashes.
Causes:	The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor.
Remedy:	Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead.

Error code:	0B
Description:	Transfer Fan Malfunction
Causes:	Ventilation Fan Motor (M6) PWB-A (Engine Control Board) Power Unit (PU)
Remedy:	1 Check the M6 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M6 operation check. PWB-A PJ10A-1 (REM) PWB-A PJ10A-3 (LOCK) 2-H 5 Change PWB-A. 6 Change PU.

Error code:	0C
Description:	Power Supply Cooling Fan Malfunction
Causes:	Power Supply Cooling Fan Motor (M4) PWB-A (Engine Control Board) Power Unit (PU)
Remedy:	1 Check the M4 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M4 operation check. PWB-A PJ4A-1 (REM) PWB-A PJ4A-3 (LOCK) 7-I 5 Change PWB-A. 6 Change PU.

Error code:	10
Display:	DEFRAGMENTING
Description:	The printer stops.
Causes:	The printer is defragmenting memory.
Remedy:	Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service.

Error code:	12
Description:	General print quality issues
Causes:	The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced.
Remedy:	For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance.

Error code:	14
Description:	Wrinkled ribbon
Causes:	Ribbon fed through the machine incorrectly. Incorrect burn temperature. Incorrect or uneven printhead pressure. Media not feeding properly; walking from side to side. The strip plate needs adjusting. The printhead needs vertical adjustment. The printhead is improperly balanced. The printhead and platen roller need to be realigned.
Remedy:	See Load Ribbon on page 64. Set the darkness to the lowest possible setting for good print quality. See Adjust Print Darkness on page 78. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Make sure that media is snug by adjusting the media guide, or call a service technician. Adjust the printhead balance.

Error code:	15
Description:	Printing too light or too dark over the entire label
Causes:	The media or ribbon is not designed for high-speed operation. You are using an incorrect combination of media and ribbon for your application. You are using ribbon with direct thermal media. Incorrect or uneven printhead pressure.
Remedy:	Replace supplies with those recommended for high-speed operation. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. Direct thermal media does not require ribbon. To check if you are using direct thermal media, perform the label scratch test in When to Use Ribbon on page 62. Set the pressure to the minimum needed. See Adjust Printhead Pressure on page 70.

Error code:	16
Description:	Smudge marks on labels
Causes:	The media or ribbon is not designed for high-speed operation.
Remedy:	Replace supplies with those recommended for high-speed operation.

Error code:	17
Description:	Misregistration/skips labels
Causes:	The printer is not calibrated. Improper label format.
Remedy:	Recalibrate the printer. Use correct label format.

Error code:	21
Description:	The bar code printed on a label does not scan.
Causes:	The bar code is not within specifications because the print is too light or too dark. Not enough blank space around the bar code.
Remedy:	Perform the FEED Self Test on page 120. Adjust the darkness or print speed settings as necessary. Leave at least 1/8 in. (3.2 mm) between the bar code and other printed areas on the label and between the bar code and the edge of the label.

Error code:	23
Description:	Auto Calibrate failed.
Causes:	Media or ribbon is loaded incorrectly. The sensors could not detect the media or ribbon. The sensors are dirty or positioned improperly. The sensors are dirty, or media is positioned improperly for the sensors to detect. The media type is set incorrectly.
Remedy:	Ensure that media and ribbon are loaded correctly. Manually calibrate the printer. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Ensure that the sensors are clean and that media is positioned properly. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81.

Error code:	29
Description:	The ribbon light is on even though ribbon is loaded correctly.
Causes:	The printer was not calibrated for the label and ribbon being used.
Remedy:	Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90.

Error code:	2A
Display:	No Ink Cartridge
Description:	Faulty NVRAM Data
Causes:	NVRAM PWB-A (Engine Control Board)
Remedy:	1 Unplug the power cord and plug it in, then turn OFF and ON the Power Switch. 2 Check NVRAM (PJ26) on PWB-A for proper connection and correct as necessary. 3 Change PWB-A.