Canon imagePROGRAF iPF500
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
термическая струйная
Макс. формат
A2
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Размещение |
настольный |
Цветность печати |
цветная |
Тип устройства |
Принтер |
Макс. формат |
A2 |
Технология печати |
термическая струйная |
Сканер |
|
Печать фотографий |
|
Факс |
|
Телефон |
|
Копир |
|
Тип |
струйный |
Принтер |
|
Мин, объем капли |
4 пл |
Прямая печать |
|
Двусторонняя печать |
|
Пигментные чернила |
|
Количество цветов |
5 |
Макс, разрешение для ч/б печати |
|
| По X | 1 200 |
| По Y | 1 200 |
Сканер |
|
Отправка изображения по e-mail |
|
Стандарт WIA |
|
Стандарт TWAIN |
|
Печать на: |
|
| Пленках |
|
| Глянцевой бумаге |
|
| Рулоне |
|
| Матовой бумаге |
|
| Фотобумаге |
|
| CD/DVD |
|
| Карточках |
|
| Конвертах |
|
| Этикетках |
|
Факс |
|
Цветной |
|
Телефон |
|
Автоответчик |
|
Спикерфон |
|
Проводная трубка |
|
АОН |
|
Беспроводная трубка |
|
Caller ID |
|
Стандарт DECT |
|
Языки управления |
|
| PostScript 3 |
|
| PostScript |
|
| PostScript 2 |
|
Финишер |
|
Электронная сортировка |
|
Сортировка со сдвигом |
|
Сортер |
|
Степлер |
|
Брошюровщик |
|
Интерфейсы |
|
Версия USB |
2,0 |
USB |
|
RS-232 |
|
Инфракрасный порт |
|
LPT |
|
Bluetooth |
|
Wi-Fi |
|
FireWire (IEEE 1394) |
|
Веб-интерфейс |
|
Устройство для чтения карт памяти |
|
Ethernet (RJ-45) |
|
Дополнительная информация |
|
Мин. системные требования |
Intel Pentium II |
Поддержка ОС |
|
| Windows |
|
| DOS |
|
| Linux |
|
| Mac OS |
|
Модули
ELECTRICAL PART
AIR FLOW FAN UNIT
INK SUPPLY UNIT
PURGE UNIT
Tool
ROLL UNIT
CASSETTE
PICK-UP & FEED UNIT (2)
PLATEN & SPUR UNIT
STAND & BASKET UNIT
CUTTER UNIT
INK SUPPLY UNIT 2
Printer & Accessories
PICK-UP & FEED UNIT (1)
COVERS (1)
CARRIAGE & FEED MOTOR UNIT
CARRIAGE UNIT
PINCH ROLLER UNIT
LINEAR SCALE & LIFT DRIVE UNIT
Детали CARRIAGE UNIT
| Деталь: | CUTTER DRIVER PCB ASSY |
| Парткод: | QM2-3424-000 |
| Деталь: | SENSOR, HUMIDITY |
| Парткод: | WP2-5187-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM3-0551-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM3-0564-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM3-0769-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM3-0758-000 |
| Деталь: | LITHIUM BATTERY |
| Парткод: | WK1-5024-000 |
| Деталь: | POWER SUPPLY ASSY |
| Парткод: | QK1 -2073-000 |
| Деталь: | POWER SUPPLY ASSY |
| Парткод: | QK1 -2074-000 |
| Деталь: | POWER SUPPLY ASSY |
| Парткод: | QK1 -2745-000 |
| Деталь: | POWER SUPPLY ASSY |
| Парткод: | QK1 -2746-000 |
| Деталь: | HARNESS, WIRE, POWER |
| Парткод: | QM3-0853-000 |
| Деталь: | HARNESS, WIRE, POWER |
| Парткод: | QM3-0940-000 |
| Деталь: | HARNESS, WIRE, POWER |
| Парткод: | QM3-0927-000 |
| Деталь: | HARNESS, WIRE, HIGROMETER |
| Парткод: | QM3-0858-000 |
| Деталь: | HOLDER, CORE, CABLE |
| Парткод: | QC2-0606-000 |
| Деталь: | HARNESS, WIRE, INLET |
| Парткод: | QM3-0863-000 |
| Деталь: | HARNESS, WIRE, 2, CROSSING |
| Парткод: | QM3-0909-000 |
| Деталь: | HARNESS, WIRE, 2, CROSSING |
| Парткод: | QM3-0880-000 |
| Деталь: | HARNESS, WIRE, 2 |
| Парткод: | QM3-0932-000 |
| Деталь: | HARNESS, WIRE, 1, CROSSING |
| Парткод: | QM3-0908-000 |
| Деталь: | HARNESS, WIRE, 1, CROSSING |
| Парткод: | QM3-0881-000 |
| Деталь: | HARNESS, WIRE, 1 |
| Парткод: | QM3-0933-000 |
| Деталь: | HARNESS, WIRE, BASE UNIT |
| Парткод: | QM3-0905-000 |
| Деталь: | HARNESS, WIRE, BASE UNIT |
| Парткод: | QM3-0895-000 |
| Деталь: | GUIDE, CABLE |
| Парткод: | QC2-0612-000 |
| Деталь: | CONNECTOR UNIT |
| Парткод: | QM3-0527-000 |
| Деталь: | CABLE, FLAT, CONTROL PANEL |
| Парткод: | QK1-2726-000 |
| Деталь: | CABLE, FLAT, CONTROL PANEL |
| Парткод: | QK1-2098-000 |
| Деталь: | RETAINING PLATE, HARNESS, WIRE |
| Парткод: | QC2-1373-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-0136-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-0262-000 |
| Деталь: | CLIP, CABLE |
| Парткод: | WT2-0317-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5701-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-0494-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5018-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5056-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5064-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5098-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5694-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5760-000 |
| Деталь: | HARNESS, WIRE, CUTTER |
| Парткод: | QM3-0857-000 |
| Деталь: | SCREW, M3X12 |
| Парткод: | QC2-1411-000 |
| Деталь: | HARNESS, WIRE |
| Парткод: | QM3-0871-000 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | WASHER, TOOTHED LOCK, M4 |
| Парткод: | XD1-4200-402 |
| Деталь: | SCREW, MACHINE M4X6 |
| Парткод: | XB1-2400-606 |
| Деталь: | SUCTION FAN UNIT |
| Парткод: | QM3-0701-010 |
| Деталь: | SUCTION FAN UNIT |
| Парткод: | QM3-0179-010 |
| Деталь: | FAN |
| Парткод: | QK1-2084-000 |
| Деталь: | FAN |
| Парткод: | QK1-1386-000 |
| Деталь: | AIR DUCT, 2 |
| Парткод: | QM3-0187-000 |
| Деталь: | SEAL, AIR DUCT |
| Парткод: | QC2-1076-000 |
| Деталь: | SEAL, 3, AIR DUCT |
| Парткод: | QC2-1079-000 |
| Деталь: | AIR DUCT, 3 |
| Парткод: | QC2-1070-000 |
| Деталь: | AIR DUCT, 3 |
| Парткод: | QC2-1071-000 |
| Деталь: | AIR DUCT, 1 |
| Парткод: | QL2-1537-000 |
| Деталь: | HARNESS, WIRE, FAN, PLATEN |
| Парткод: | QM3-0864-000 |
| Деталь: | FRONT DUCT UNIT |
| Парткод: | QM3-0208-000 |
| Деталь: | M/C RELAY PCB ASSY |
| Парткод: | QM3-0550-000 |
| Деталь: | INK SUPPLY UNIT |
| Парткод: | QM3-0738-000 |
| Деталь: | INK SUPPLY UNIT |
| Парткод: | QM3-0525-040 |
| Деталь: | INK SUPPLY UNIT |
| Парткод: | QM3-0554-040 |
| Деталь: | GUIDE, TUBE, CARRIAGE |
| Парткод: | QC2-0746-020 |
| Деталь: | IC, PHOTO INTERRUPTER, TLP1241 |
| Парткод: | WG8-5624-000 |
| Деталь: | BASE UNIT, JOINT |
| Парткод: | QM3-0584-000 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM3-0739-000 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM3-0555-050 |
| Деталь: | INK SUPPLY DRIVE UNIT |
| Парткод: | QM3-0162-000 |
| Деталь: | GEAR, VALVE 2 |
| Парткод: | QC2-0739-000 |
| Деталь: | GEAR, VALVE 3 |
| Парткод: | QC2-0740-000 |
| Деталь: | CAM, VALVE |
| Парткод: | QC2-0742-000 |
| Деталь: | BELT, TIMING |
| Парткод: | QC2-0832-000 |
| Деталь: | MOTOR, 24V, DC |
| Парткод: | QK1 -0550-000 |
| Деталь: | ABSORBER, INK, UPPER |
| Парткод: | QC2-0763-000 |
| Деталь: | ABSORBER, INK, LOWER |
| Парткод: | QC2-0764-000 |
| Деталь: | JOINT, LEVER |
| Парткод: | QC2-0758-000 |
| Деталь: | HARNESS, WIRE, INK SENSOR |
| Парткод: | QM3-0855-000 |
| Деталь: | HARNESS, WIRE, INK SENSOR |
| Парткод: | QM3-0862-000 |
| Деталь: | HARNESS, WIRE, VALVE MOTOR |
| Парткод: | QM3-0901-000 |
| Деталь: | HARNESS, WIRE, VALVE MOTOR |
| Парткод: | QM3-0872-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0935-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0902-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0873-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0924-000 |
| Деталь: | HARNESS, WIRE, 2, INK TANK |
| Парткод: | QM3-0874-000 |
| Деталь: | HARNESS, WIRE, 2, INK TANK |
| Парткод: | QM3-0925-000 |
| Деталь: | HARNESS, WIRE, ROM, INK TANK |
| Парткод: | QM3-0903-000 |
| Деталь: | HARNESS, WIRE, ROM, INK TANK |
| Парткод: | QM3-0875-000 |
| Деталь: | HARNESS, WIRE, SENSOR, VALVE |
| Парткод: | QM3-0914-000 |
| Деталь: | HARNESS, WIRE, SENSOR, VALVE |
| Парткод: | QM3-0886-000 |
| Деталь: | GUIDE, INK TUBE |
| Парткод: | QC2-1375-000 |
| Деталь: | HARNESS, WIRE, FEED |
| Парткод: | QM3-0928-000 |
| Деталь: | SCREW, BINDING HEAD, M2.6X4 |
| Парткод: | XB1-2260-409 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | SCREW, TAP, BINDING HEAD, M3X8 |
| Парткод: | XB4-7300-806 |
| Деталь: | GUIDE, MAINTENANCE CARTRIDGE |
| Парткод: | QC2-1110-000 |
| Деталь: | HARNESS, WIRE, HEAD MANAGEMENT |
| Парткод: | QM3-0904-000 |
| Деталь: | HARNESS, WIRE, HEAD MANAGEMENT |
| Парткод: | QM3-0876-000 |
| Деталь: | JOINT, TUBE |
| Парткод: | QC2-1323-000 |
| Деталь: | PURGE KIT |
| Парткод: | QM3-0653-080 |
| Деталь: | PURGE KIT |
| Парткод: | QM3-0654-050 |
| Деталь: | HEAD MANAGEMENT SENSOR |
| Парткод: | QM3-0529-000 |
| Деталь: | ABSORBER, INK, FAN |
| Парткод: | QC2-1100-000 |
| Деталь: | ABSORBER, WASTE INK |
| Парткод: | QC2-0806-000 |
| Деталь: | JOINT, INK TUBE, PURGE UNIT |
| Парткод: | QC2-0833-020 |
| Деталь: | MIST FAN UNIT |
| Парткод: | QM3-0210-000 |
| Деталь: | MIST FAN UNIT |
| Парткод: | QM3-0211-000 |
| Деталь: | MIST FAN UNIT |
| Парткод: | QM3-0799-000 |
| Деталь: | MIST FAN UNIT |
| Парткод: | QM3-0792-000 |
| Деталь: | FAN |
| Парткод: | QK1-1440-000 |
| Деталь: | FAN |
| Парткод: | QK1-2086-000 |
| Деталь: | TUBE JOINT UNIT |
| Парткод: | QM3-6676-000 |
| Деталь: | JOINT, INK TUBE, PURGE UNIT |
| Парткод: | QC3-2876-000 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | SCREW, TAP, BINDING HEAD, M3X8 |
| Парткод: | XB4-7300-806 |
| Деталь: | 999 |
| Парткод: | 999-9999-999 |
| Деталь: | LUBE, FLOIL G-5000H, GREASE |
| Парткод: | FY9-6022-000 |
| Деталь: | GREASE, EU-1 |
| Парткод: | QY9-0037-000 |
| Деталь: | ADJUSTING UNIT, CR WIRE |
| Парткод: | AY3-4493-000 |
| Деталь: | COVER, ROLL |
| Парткод: | QC2-1255-000 |
| Деталь: | COVER, ROLL, LEFT |
| Парткод: | QC2-1385-000 |
| Деталь: | COVER, ROLL, RIGHT |
| Парткод: | QC2-1386-000 |
| Деталь: | TRAY, MANUAL PAPER FEED |
| Парткод: | QC2-1259-000 |
| Деталь: | TRAY, MANUAL PAPER FEED |
| Парткод: | QC2-6523-000 |
| Деталь: | GUIDE, SIDE, PAPER |
| Парткод: | QC2-1261-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-1262-000 |
| Деталь: | SLIDE PIECE, GUIDE |
| Парткод: | QC2-1310-000 |
| Деталь: | HOLDER, ROLL |
| Парткод: | QC2-1222-000 |
| Деталь: | SCREW, TAP M3X6 |
| Парткод: | XA9-0863-000 |
| Деталь: | SPACER, HOLDER, ROLL |
| Парткод: | QC2-1223-000 |
| Деталь: | ROLL SHAFT UNIT |
| Парткод: | QM3-0215-000 |
| Деталь: | ROLL SHAFT UNIT |
| Парткод: | QM3-0756-000 |
| Деталь: | CAP, ROLL, LEFT |
| Парткод: | QC2-1263-000 |
| Деталь: | CAP, ROLL, RIGHT |
| Парткод: | QC2-1264-000 |
| Деталь: | CASE, ROLL, LEFT |
| Парткод: | QC2-1257-000 |
| Деталь: | CASE, R, ROLL |
| Парткод: | QC2-1258-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | QK1-2081-000 |
| Деталь: | PCB ASSY, DRIVER, ROLL UNIT |
| Парткод: | QM2-3428-010 |
| Деталь: | HOLDER UNIT, LEFT, ROLL HOLDER |
| Парткод: | QM3-0226-000 |
| Деталь: | HOLDER UNIT, RIGHT, ROLL HOLDE |
| Парткод: | QM3-0227-000 |
| Деталь: | ROLLER RELEASE UNIT |
| Парткод: | QM3-0225-000 |
| Деталь: | ROLLER RELEASE UNIT |
| Парткод: | QM3-0752-000 |
| Деталь: | SENSOR UNIT, DETECTION, ROLL |
| Парткод: | QM3-0231-000 |
| Деталь: | IC, PHOTO INTERRUPTER, TLP1241 |
| Парткод: | WG8-5624-000 |
| Деталь: | FEED ROLLER UNIT |
| Парткод: | QM3-0229-000 |
| Деталь: | FEED ROLLER UNIT |
| Парткод: | QM3-0754-000 |
| Деталь: | BUSHING |
| Парткод: | QC2-1189-000 |
| Деталь: | SCREW, M3X12 |
| Парткод: | QC2-1411-000 |
| Деталь: | BUSHING |
| Парткод: | QC2-1231-000 |
| Деталь: | SPRING, LEAF, GROUNDING |
| Парткод: | QC2-1236-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-1381-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-1234-000 |
| Деталь: | SENSOR UNIT, CAM, ROLL |
| Парткод: | QM3-0221-000 |
| Деталь: | GEAR, PENDULUM, TOP |
| Парткод: | QC2-1211-000 |
| Деталь: | GEAR, PENDULUM, BOTTOM |
| Парткод: | QC2-1244-000 |
| Деталь: | PENDULUM UNIT, LOWER, ROLL |
| Парткод: | QM3-0223-030 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-1210-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-6569-000 |
| Деталь: | GEAR, PENDULUM, 1 |
| Парткод: | QC2-1212-020 |
| Деталь: | GEAR |
| Парткод: | QC2-1238-000 |
| Деталь: | GEAR |
| Парткод: | QC2-1214-000 |
| Деталь: | PENDULUM UNIT, UPPER, ROLL |
| Парткод: | QM3-0222-030 |
| Деталь: | PENDULUM UNIT, UPPER, ROLL |
| Парткод: | QM3-0776-010 |
| Деталь: | GEAR |
| Парткод: | QC2-1213-000 |
| Деталь: | PENDULUM UNIT, 2, ROLL |
| Парткод: | QM3-0224-000 |
| Деталь: | GEAR, PENDULUM, 2 |
| Парткод: | QC2-1240-000 |
| Деталь: | HARNESS, WIRE, ROLL UNIT |
| Парткод: | QM3-0868-000 |
| Деталь: | HARNESS, WIRE, SENSOR, ROLL |
| Парткод: | QM3-0869-000 |
| Деталь: | WASHER |
| Парткод: | QC1-0710-000 |
| Деталь: | WASHER |
| Парткод: | QC1-4149-000 |
| Деталь: | ROLLER, GUIDE |
| Парткод: | QC2-1541-000 |
| Деталь: | HOLDER, ROLLER |
| Парткод: | QC2-1191-000 |
| Деталь: | SCREW, TP, M3X10 |
| Парткод: | XA9-0831-000 |
| Деталь: | HOLDER, ROLL, LEFT, 2 |
| Парткод: | QL2-1585-000 |
| Деталь: | HOLDER, ROLL, LEFT, 1 |
| Парткод: | QM3-0628-000 |
| Деталь: | HOLDER, ROLL, LEFT, 1 |
| Парткод: | QM3-5311-000 |
| Деталь: | HOLDER, ROLL |
| Парткод: | QC2-6270-000 |
| Деталь: | HOLDER, ROLL, LEFT, 2 |
| Парткод: | QM3-0717-000 |
| Деталь: | RING |
| Парткод: | QC2-4327-000 |
| Деталь: | GEAR, PENDULUM, 1 |
| Парткод: | QC2-6568-000 |
| Деталь: | CASSETTE BASE |
| Парткод: | QM3-0181-000 |
| Деталь: | CASSETTE BASE |
| Парткод: | QM3-0779-000 |
| Деталь: | GUIDE, SIDE LIMIT, CASSETTE |
| Парткод: | QM3-0183-000 |
| Деталь: | GUIDE, END LIMIT, CASSETTE |
| Парткод: | QM3-0184-000 |
| Деталь: | PLATE UNIT,PAPER CASSETTE |
| Парткод: | QM3-0182-000 |
| Деталь: | SHEET, MYLAR |
| Парткод: | QC2-1556-020 |
| Деталь: | TORQUE LIMITTER |
| Парткод: | QC2-0884-000 |
| Деталь: | RUBBER UNIT, SEPARATE |
| Парткод: | QM3-0631-000 |
| Деталь: | CASSETTE SENSOR UNIT |
| Парткод: | QM3-0526-000 |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5624-000 |
| Деталь: | LEVER, RELEASE |
| Парткод: | QC2-0872-000 |
| Деталь: | GEAR, CAM, SEPARATION |
| Парткод: | QC2-0873-010 |
| Деталь: | LEVER, RETURN |
| Парткод: | QC2-0874-000 |
| Деталь: | ARM, LEVER, RETURN |
| Парткод: | QC2-0875-000 |
| Деталь: | LEVER, PAPER FEED |
| Парткод: | QC2-0876-000 |
| Деталь: | ROLLER, GUIDE, INNER |
| Парткод: | QC2-1317-000 |
| Деталь: | COVER, LEVER, RETURN |
| Парткод: | QC2-1324-000 |
| Деталь: | LEVER, PAPER SENSOR, CASSETTE |
| Парткод: | QC2-0938-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-0878-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-0879-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-0888-000 |
| Деталь: | BUSHING |
| Парткод: | QC2-0866-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5694-000 |
| Деталь: | ROLLER, FEED |
| Парткод: | QC2-0930-000 |
| Деталь: | GUIDE, INNER, PAPER |
| Парткод: | QC2-0941-000 |
| Деталь: | GUIDE UNIT, L, INNER, PAPER PA |
| Парткод: | QM3-0632-000 |
| Деталь: | HARNESS, WIRE, PAPER SENSE |
| Парткод: | QM3-0865-000 |
| Деталь: | HARNESS, WIRE, CASSETTE SENSE |
| Парткод: | QM3-0866-000 |
| Деталь: | HARNESS, WIRE, CASSETTE |
| Парткод: | QM3-0907-000 |
| Деталь: | HARNESS, WIRE, CASSETTE |
| Парткод: | QM3-0946-000 |
| Деталь: | HARNESS, WIRE, CASSETTE |
| Парткод: | QM3-0879-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5056-000 |
| Деталь: | WASHER |
| Парткод: | QC1-4149-000 |
| Деталь: | PIN DOWEL |
| Парткод: | XD3-2200-122 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | PIN, SPRING, 2X10 |
| Парткод: | XD3-1200-102 |
| Деталь: | PIN, STRAIGHT, 2X8 |
| Парткод: | XD3-2200-082 |
| Деталь: | SPUR UNIT |
| Парткод: | QM3-0592-000 |
| Деталь: | SPUR UNIT |
| Парткод: | QM3-0794-000 |
| Деталь: | SPUR MOTOR UNIT |
| Парткод: | QM3-0246-000 |
| Деталь: | PLATEN A |
| Парткод: | QL2-1579-000 |
| Деталь: | PLATEN B |
| Парткод: | QL2-1580-000 |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5624-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QA4-0292-000 |
| Деталь: | ROWEL |
| Парткод: | QA4-0880-000 |
| Деталь: | BUSHING |
| Парткод: | QC2-0866-000 |
| Деталь: | ROLLER, TRANSPORT, PAPER |
| Парткод: | QC2-0955-000 |
| Деталь: | BELT, DRIVE, PAPER EJECTION |
| Парткод: | QC2-0958-000 |
| Деталь: | PULLEY |
| Парткод: | QC2-0964-000 |
| Деталь: | RING |
| Парткод: | QC2-1395-000 |
| Деталь: | PULLEY, BELT |
| Парткод: | QC2-1569-000 |
| Деталь: | WASHER |
| Парткод: | QC1-4149-000 |
| Деталь: | BUSHING |
| Парткод: | QC2-1002-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-1396-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-1004-000 |
| Деталь: | COVER, BUSHING |
| Парткод: | QC2-1007-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-1009-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-1018-000 |
| Деталь: | GEAR, ROWEL |
| Парткод: | QC2-1024-000 |
| Деталь: | ARM, SUPPORT, ROWEL BASE |
| Парткод: | QC2-1025-000 |
| Деталь: | CAM, ROWEL |
| Парткод: | QC2-1027-000 |
| Деталь: | PLATE, REFLECTION, MULTI-SENSO |
| Парткод: | QL2-1561-000 |
| Деталь: | DUCT UNIT, PLATEN |
| Парткод: | QL2-1592-000 |
| Деталь: | DUCT UNIT, PLATEN |
| Парткод: | QM3-0802-000 |
| Деталь: | FLANGE, BELT PULLEY |
| Парткод: | QC2-1570-000 |
| Деталь: | ROLLER, DELIVERY |
| Парткод: | QL2-1566-000 |
| Деталь: | SENSOR UNIT, SPUR |
| Парткод: | QM3-0245-000 |
| Деталь: | HARNESS, WIRE, 1, SPUR |
| Парткод: | QM3-0890-000 |
| Деталь: | HARNESS, WIRE, 1, SPUR |
| Парткод: | QM3-0917-000 |
| Деталь: | HARNESS, WIRE, 2, SPUR |
| Парткод: | QM3-0891-000 |
| Деталь: | HARNESS, WIRE, 2, SPUR |
| Парткод: | QM3-0918-000 |
| Деталь: | BASKET |
| Парткод: | QC2-4341-000 |
| Деталь: | ROD, BASKET, REAR |
| Парткод: | QC2-4342-000 |
| Деталь: | ROD, BASKET, FRONT |
| Парткод: | QC2-4343-000 |
| Деталь: | JOINT, ROD |
| Парткод: | QC2-4346-000 |
| Деталь: | BAND, FIXING |
| Парткод: | QC2-4359-000 |
| Деталь: | SCREW, HEX SOCKET, M4X30 |
| Парткод: | QC2-5993-000 |
| Деталь: | BOX, ACCESSORY |
| Парткод: | QC2-5995-000 |
| Деталь: | CAP, STAND |
| Парткод: | QC2-4348-000 |
| Деталь: | CASTER |
| Парткод: | QC2-4350-000 |
| Деталь: | CASTER, W/STOPPER |
| Парткод: | QC2-4351-000 |
| Деталь: | STACK ROD UNIT |
| Парткод: | QM3-0684-000 |
| Деталь: | HOLDER, ROD |
| Парткод: | QC2-4333-000 |
| Деталь: | ROD, BASKET, SIDE |
| Парткод: | QC2-4334-000 |
| Деталь: | CAP, ROD |
| Парткод: | QC2-4335-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-6030-000 |
| Деталь: | FOOT, RUBBER |
| Парткод: | QC2-4338-000 |
| Деталь: | SCREW, ALLEN, M8X20 |
| Парткод: | QC1-5141-000 |
| Деталь: | CUTTER UNIT |
| Парткод: | QM3-0732-010 |
| Деталь: | HARNESS, WIRE, LIFT MOTOR, CUT |
| Парткод: | QM3-0867-000 |
| Деталь: | HARNESS, WIRE, COVER |
| Парткод: | QM3-0913-000 |
| Деталь: | HARNESS, WIRE, COVER |
| Парткод: | QM3-0878-000 |
| Деталь: | HARNESS, WIRE, COVER |
| Парткод: | QM3-0934-000 |
| Деталь: | HARNESS, WIRE, COVER |
| Парткод: | QM3-0898-000 |
| Деталь: | CUTTER LIFTER DRIVE UNIT |
| Парткод: | QM3-0600-010 |
| Деталь: | CUTTER LIFTER DRIVE UNIT |
| Парткод: | QM3-0601-010 |
| Деталь: | CUTTER LIFTER DRIVE UNIT |
| Парткод: | QM3-0771-010 |
| Деталь: | CUTTER LIFTER DRIVE UNIT |
| Парткод: | QM3-0757-010 |
| Деталь: | CUTTER DRIVE UNIT |
| Парткод: | QM3-0585-010 |
| Деталь: | BELT, TIMING |
| Парткод: | QC1-4850-000 |
| Деталь: | MOTOR, DC24V |
| Парткод: | QK1 -0550-000 |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5624-000 |
| Деталь: | MICRO SWITCH |
| Парткод: | WC4-5052-000 |
| Деталь: | LEVER, SENSOR |
| Парткод: | QC2-1274-000 |
| Деталь: | BELT, TIMING |
| Парткод: | QC2-0832-000 |
| Деталь: | SCREW, BH 2.6X4 |
| Парткод: | XB1-2260-409 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | INK SUPPLY UNIT |
| Парткод: | QM3-0738-000 |
| Деталь: | INK SUPPLY UNIT |
| Парткод: | QM3-0525-040 |
| Деталь: | INK SUPPLY UNIT |
| Парткод: | QM3-0554-040 |
| Деталь: | GUIDE, TUBE, CARRIAGE |
| Парткод: | QC2-0746-020 |
| Деталь: | IC, PHOTO INTERRUPTER, TLP1241 |
| Парткод: | WG8-5624-000 |
| Деталь: | BASE UNIT, JOINT |
| Парткод: | QM3-0584-000 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM3-0739-000 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM3-0555-050 |
| Деталь: | INK SUPPLY DRIVE UNIT |
| Парткод: | QM3-0162-000 |
| Деталь: | GEAR, VALVE 2 |
| Парткод: | QC2-0739-000 |
| Деталь: | GEAR, VALVE 3 |
| Парткод: | QC2-0740-000 |
| Деталь: | CAM, VALVE |
| Парткод: | QC2-0742-000 |
| Деталь: | BELT, TIMING |
| Парткод: | QC2-0832-000 |
| Деталь: | MOTOR, 24V, DC |
| Парткод: | QK1 -0550-000 |
| Деталь: | ABSORBER, INK, UPPER |
| Парткод: | QC2-0763-000 |
| Деталь: | ABSORBER, INK, LOWER |
| Парткод: | QC2-0764-000 |
| Деталь: | JOINT, LEVER |
| Парткод: | QC2-0758-000 |
| Деталь: | HARNESS, WIRE, INK SENSOR |
| Парткод: | QM3-0855-000 |
| Деталь: | HARNESS, WIRE, INK SENSOR |
| Парткод: | QM3-0862-000 |
| Деталь: | HARNESS, WIRE, VALVE MOTOR |
| Парткод: | QM3-0901-000 |
| Деталь: | HARNESS, WIRE, VALVE MOTOR |
| Парткод: | QM3-0872-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0935-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0902-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0873-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0924-000 |
| Деталь: | HARNESS, WIRE, 2, INK TANK |
| Парткод: | QM3-0874-000 |
| Деталь: | HARNESS, WIRE, 2, INK TANK |
| Парткод: | QM3-0925-000 |
| Деталь: | HARNESS, WIRE, ROM, INK TANK |
| Парткод: | QM3-0903-000 |
| Деталь: | HARNESS, WIRE, ROM, INK TANK |
| Парткод: | QM3-0875-000 |
| Деталь: | HARNESS, WIRE, SENSOR, VALVE |
| Парткод: | QM3-0914-000 |
| Деталь: | HARNESS, WIRE, SENSOR, VALVE |
| Парткод: | QM3-0886-000 |
| Деталь: | GUIDE, INK TUBE |
| Парткод: | QC2-1375-000 |
| Деталь: | HARNESS, WIRE, FEED |
| Парткод: | QM3-0928-000 |
| Деталь: | SCREW, BINDING HEAD, M2.6X4 |
| Парткод: | XB1-2260-409 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | SCREW, TAP, BINDING HEAD, M3X8 |
| Парткод: | XB4-7300-806 |
| Деталь: | PRINTHEAD |
| Парткод: | NPN |
| Деталь: | INK TANK (MBK) |
| Парткод: | NPN |
| Деталь: | INK TANK (PBK) |
| Парткод: | NPN |
| Деталь: | INK TANK (C) |
| Парткод: | NPN |
| Деталь: | INK TANK (M) |
| Парткод: | NPN |
| Деталь: | INK TANK (Y) |
| Парткод: | NPN |
| Деталь: | INK TANK (PC) |
| Парткод: | NPN |
| Деталь: | INK TANK (PM) |
| Парткод: | NPN |
| Деталь: | INK TANK (R) |
| Парткод: | NPN |
| Деталь: | INK TANK (G) |
| Парткод: | NPN |
| Деталь: | INK TANK (B) |
| Парткод: | NPN |
| Деталь: | INK TANK (GY) |
| Парткод: | NPN |
| Деталь: | INK TANK (PGY) |
| Парткод: | NPN |
| Деталь: | STOPPER, BELT |
| Парткод: | QC2-1397-020 |
| Деталь: | BRUSH, CLEANER |
| Парткод: | FB1-0733-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1 -2688-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1-2689-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1 -2685-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1 -2682-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1-2690-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1-2686-000 |
| Деталь: | WIRE, GROUND |
| Парткод: | FH2-7092-020 |
| Деталь: | ROLLER, PICK-UP |
| Парткод: | QM3-0619-000 |
| Деталь: | ENCODER SENSOR UNIT |
| Парткод: | QM2-3422-000 |
| Деталь: | MOTOR, DC24V |
| Парткод: | QK1 -0550-000 |
| Деталь: | BELT, TIMING |
| Парткод: | QC2-1455-000 |
| Деталь: | WHEEL, CODE |
| Парткод: | QC3-1886-000 |
| Деталь: | WHEEL, CODE |
| Парткод: | QC1-4851-000 |
| Деталь: | RING |
| Парткод: | QC2-0682-000 |
| Деталь: | ROLLER, PICK-UP, PAPER |
| Парткод: | QC2-0862-000 |
| Деталь: | ROLLER, PICK-UP, PAPER |
| Парткод: | QC2-0863-000 |
| Деталь: | GEAR, DRIVE, PAPER FEED |
| Парткод: | QC2-0864-000 |
| Деталь: | GEAR, CAM, PAPER FEED |
| Парткод: | QC2-0865-010 |
| Деталь: | BUSHING |
| Парткод: | QC2-0866-000 |
| Деталь: | LEVER, CAM, PAPER CASSETTE |
| Парткод: | QC2-0867-000 |
| Деталь: | SPRING, R, COMPRESSION |
| Парткод: | QC2-0868-000 |
| Деталь: | SPRING, L, COMPRESSION |
| Парткод: | QC2-0869-000 |
| Деталь: | SPRING, EARTH, PAPER CASSETTE |
| Парткод: | QC2-0887-000 |
| Деталь: | GEAR, PENDULUM, PAPER CASSETTE |
| Парткод: | QC2-0891-000 |
| Деталь: | GEAR, PAPER CASSETTE |
| Парткод: | QC2-0892-000 |
| Деталь: | WASHER |
| Парткод: | QC1-4149-000 |
| Деталь: | RING, PUSH |
| Парткод: | XA9-0135-000 |
| Деталь: | GEAR, IDLER |
| Парткод: | QC2-0895-000 |
| Деталь: | GEAR, CAM, RELEASE |
| Парткод: | QC2-0900-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-0902-000 |
| Деталь: | CAM, RELEASE |
| Парткод: | QC2-0903-000 |
| Деталь: | SPRING, PLATE, PAPER CASSETTE |
| Парткод: | QC2-0918-000 |
| Деталь: | BUSHING |
| Парткод: | WT2-0270-000 |
| Деталь: | BASE, PENDULUM |
| Парткод: | QC2-0889-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-0890-000 |
| Деталь: | GEAR, 17T/77T |
| Парткод: | QC2-1451-000 |
| Деталь: | GEAR, 20T/61T |
| Парткод: | QC2-1452-000 |
| Деталь: | BELT, TIMING |
| Парткод: | QC2-0832-000 |
| Деталь: | TRAY UNIT |
| Парткод: | QM3-0203-000 |
| Деталь: | TRAY UNIT |
| Парткод: | QM3-0736-000 |
| Деталь: | TRAY, PAPER EJECTION |
| Парткод: | QC2-1116-000 |
| Деталь: | TRAY, DELIVERY |
| Парткод: | QC2-6518-000 |
| Деталь: | TRAY, EXTENSION, PAPER |
| Парткод: | QC2-1117-000 |
| Деталь: | TRAY, AUXILIARY |
| Парткод: | QC2-6519-000 |
| Деталь: | BASE, GUIDE, ROLL |
| Парткод: | QC2-1277-000 |
| Деталь: | GUIDE, ROLL |
| Парткод: | QC2-1278-000 |
| Деталь: | ROLL GUIDE UNIT |
| Парткод: | QM3-0745-000 |
| Деталь: | COVER, CIRCLE |
| Парткод: | QC2-1165-000 |
| Деталь: | TANK COVER UNIT |
| Парткод: | QM3-0549-000 |
| Деталь: | TANK COVER UNIT |
| Парткод: | QM3-0563-000 |
| Деталь: | TANK COVER UNIT |
| Парткод: | QM3-0762-000 |
| Деталь: | TANK COVER UNIT |
| Парткод: | QM3-0708-000 |
| Деталь: | COVER, LEFT |
| Парткод: | QC2-1123-000 |
| Деталь: | COVER, LEFT, FRONT |
| Парткод: | QC2-1139-030 |
| Деталь: | COVER, LEFT, FRONT |
| Парткод: | QC2-1122-000 |
| Деталь: | COVER, TOP, RIGHT |
| Парткод: | QC2-1178-000 |
| Деталь: | COVER, TOP, RIGHT |
| Парткод: | QC2-1166-000 |
| Деталь: | COVER, TOP, RIGHT |
| Парткод: | QC2-6537-000 |
| Деталь: | COVER, TOP, RIGHT |
| Парткод: | QC2-6514-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0626-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0205-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0627-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0206-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0766-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0765-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0744-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0740-000 |
| Деталь: | MIST FILTER UNIT |
| Парткод: | QM3-0212-030 |
| Деталь: | COVER, FILTER |
| Парткод: | QC2-1167-000 |
| Деталь: | COVER, RIGHT |
| Парткод: | QM3-0583-030 |
| Деталь: | COVER, RIGHT |
| Парткод: | QM3-0614-030 |
| Деталь: | COVER, LOUVER |
| Парткод: | QC2-1272-000 |
| Деталь: | COVER, RIGHT, FRONT |
| Парткод: | QC2-1163-000 |
| Деталь: | COVER, RIGHT, FRONT |
| Парткод: | QC2-1176-000 |
| Деталь: | TOP COVER UNIT |
| Парткод: | QM3-0636-040 |
| Деталь: | TOP COVER UNIT |
| Парткод: | QM3-0742-030 |
| Деталь: | COVER, TOP, WINDOW |
| Парткод: | QL2-1571-050 |
| Деталь: | COVER, FRONT, UPPER |
| Парткод: | QC2-1308-000 |
| Деталь: | COVER, FRONT, UPPER |
| Парткод: | QC2-1170-000 |
| Деталь: | HOLDER, FILTER(MECH), EXHAUST |
| Парткод: | QL2-1555-000 |
| Деталь: | FILTER(MECH), AIR |
| Парткод: | QC2-1289-000 |
| Деталь: | COVER, AIR DUCT, FRONT |
| Парткод: | QC2-1271-000 |
| Деталь: | ARM |
| Парткод: | QC2-1273-000 |
| Деталь: | FILTER(MECH), INK MIST |
| Парткод: | QC2-1103-000 |
| Деталь: | ABSORBER, DRAIN, WASTE INK |
| Парткод: | QC2-1446-000 |
| Деталь: | EMBLEM, CANON LOGO |
| Парткод: | QC2-1404-000 |
| Деталь: | SCREW, TAP, BINDING HEAD, M3X8 |
| Парткод: | XB4-7300-806 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | MOTOR, 26.4V, DC |
| Парткод: | QK1 -0447-000 |
| Деталь: | MOTOR, DC BRUSHLESS |
| Парткод: | QK1-2080-000 |
| Деталь: | MOTOR, DC BRUSHLESS |
| Парткод: | QK1-2082-000 |
| Деталь: | MOTOR, DC BRUSHLESS |
| Парткод: | QK1 -2083-000 |
| Деталь: | SENSOR UNIT, LINE FEED |
| Парткод: | QM2-3420-000 |
| Деталь: | BELT, DRIVE, PAPER TRANSPORT |
| Парткод: | QC2-0957-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-1396-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-0985-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-0990-000 |
| Деталь: | WHEEL, CODE |
| Парткод: | QC3-1885-000 |
| Деталь: | COVER, CODE WHEEL |
| Парткод: | QC2-0995-000 |
| Деталь: | SENSOR UNIT, HOME POSITION, LI |
| Парткод: | QM2-3423-000 |
| Деталь: | FLANGE, PULLEY |
| Парткод: | QC2-0998-000 |
| Деталь: | SCREW, BINDING HEAD, M2X5 |
| Парткод: | XB1-2200-506 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | CARRIAGE UNIT |
| Парткод: | QM3-0783-010 |
| Деталь: | CARRIAGE UNIT |
| Парткод: | QM3-0803-010 |
| Деталь: | CARRIAGE UNIT |
| Парткод: | QM3-0647-010 |
| Деталь: | CARRIAGE UNIT |
| Парткод: | QM3-0648-010 |
| Деталь: | FLEXIBLE CABLE ASSY |
| Парткод: | QM3-0785-000 |
| Деталь: | FLEXIBLE CABLE ASSY |
| Парткод: | QM3-0805-000 |
| Деталь: | FLEXIBLE CABLE ASSY |
| Парткод: | QM3-0650-000 |
| Деталь: | FLEXIBLE CABLE ASSY |
| Парткод: | QM3-0651-000 |
| Деталь: | BELT, CARRIAGE |
| Парткод: | QC2-4325-000 |
| Деталь: | BELT, CARRIAGE |
| Парткод: | QC2-0649-000 |
| Деталь: | BELT, CARRIAGE |
| Парткод: | QC2-0650-000 |
| Деталь: | CARRIAGE RELAY PCB ASSY |
| Парткод: | QM3-0361-000 |
| Деталь: | CARRIAGE RELAY PCB ASSY |
| Парткод: | QM2-3414-000 |
| Деталь: | CARRIAGE RELAY PCB ASSY |
| Парткод: | QM3-0351-000 |
| Деталь: | CABLE, FLEXIBLE |
| Парткод: | QK1 -2090-000 |
| Деталь: | ENCODER SENSOR UNIT |
| Парткод: | QM2-3421-010 |
| Деталь: | MULTI SENSOR UNIT |
| Парткод: | QM3-0365-000 |
| Деталь: | MULTI SENSOR UNIT |
| Парткод: | QM2-3437-000 |
| Деталь: | HEAD LEVER UNIT |
| Парткод: | QM3-0541-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QU1-2006-000 |
| Деталь: | HOLDER, LEVER, SET, PRINT HEAD |
| Парткод: | QC2-0653-000 |
| Деталь: | HOLDER, BELT |
| Парткод: | QC2-0655-000 |
| Деталь: | HOLDER, BELT |
| Парткод: | QC2-4326-000 |
| Деталь: | COVER, FFC, MULTI-SENSOR |
| Парткод: | QC2-0710-000 |
| Деталь: | GUIDE, TUBE |
| Парткод: | QC2-0759-000 |
| Деталь: | SPRING, LEAF, GROUDING |
| Парткод: | QC2-1283-000 |
| Деталь: | GUIDE, MULTI-SENSOR |
| Парткод: | QC2-1309-000 |
| Деталь: | CABLE, FLEXIBLE |
| Парткод: | QK1-2757-000 |
| Деталь: | CABLE, FLAT, MULTI-SENSOR |
| Парткод: | QK1-2091-000 |
| Деталь: | FERRITE CORE |
| Парткод: | WE8-6409-000 |
| Деталь: | HOLDER, WIRE(MECH) |
| Парткод: | QC2-0663-000 |
| Деталь: | LEVER, R, INK TUBE |
| Парткод: | QC2-0659-050 |
| Деталь: | LEVER, L, INK TUBE |
| Парткод: | QC2-0660-050 |
| Деталь: | LINK, LEVER, TUBE |
| Парткод: | QC2-0661-000 |
| Деталь: | PAD, OIL |
| Парткод: | QC2-0664-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-1396-000 |
| Деталь: | HEAD LEVER UNIT |
| Парткод: | QM3-0560-000 |
| Деталь: | ROLLER, WIRE(MECH), GUIDE |
| Парткод: | QC2-1374-000 |
| Деталь: | CLEANER UNIT, R, RAIL,CARRIAGE |
| Парткод: | QM3-0543-000 |
| Деталь: | CLEANER UNIT, L, RAIL,CARRIAGE |
| Парткод: | QM3-0542-000 |
| Деталь: | TUBE GUIDE UNIT |
| Парткод: | QM3-0704-000 |
| Деталь: | PINCH ROLLER UNIT 1 |
| Парткод: | QM3-0760-000 |
| Деталь: | PINCH ROLLER UNIT 1 |
| Парткод: | QM3-0517-000 |
| Деталь: | ROLLER, PINCH |
| Парткод: | QL2-2317-000 |
| Деталь: | ROLLER, PINCH |
| Парткод: | QL2-1593-000 |
| Деталь: | RING |
| Парткод: | QC2-0682-000 |
| Деталь: | LEVER, A |
| Парткод: | QC2-0982-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-0994-000 |
| Деталь: | LEVER, B |
| Парткод: | QC2-0996-000 |
| Деталь: | PINCH ROLLER UNIT 2 |
| Парткод: | QM3-0761-000 |
| Деталь: | PINCH ROLLER UNIT 2 |
| Парткод: | QM3-0518-000 |
| Деталь: | GUIDE UNIT, A2, PAPER |
| Парткод: | QM3-0522-020 |
| Деталь: | ROLLER, GUIDE, INNER |
| Парткод: | QC2-1317-000 |
| Деталь: | GUIDE ROLLER UNIT |
| Парткод: | QM3-0767-000 |
| Деталь: | GUIDE UNIT, INNER, STRAIGHT PA |
| Парткод: | QM3-0579-010 |
| Деталь: | ROLLER |
| Парткод: | QC1-2950-000 |
| Деталь: | GUIDE UNIT, OUTER, STRAIGHT PA |
| Парткод: | QM3-0581-010 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-0933-000 |
| Деталь: | FLAPPER |
| Парткод: | QC2-0934-010 |
| Деталь: | GUIDE, WASTE INK |
| Парткод: | QC2-1460-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-0981-000 |
| Деталь: | ROLLER, GUIDE |
| Парткод: | QC2-1541-000 |
| Деталь: | HOLDER, ROLLER, GUIDE |
| Парткод: | QC2-1229-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-0993-000 |
| Деталь: | MOTOR, 24V, DC |
| Парткод: | QK1 -0440-000 |
| Деталь: | SCALE, LINEAR |
| Парткод: | QC3-1887-000 |
| Деталь: | SCALE, LINEAR |
| Парткод: | QC3-1888-000 |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5624-000 |
| Деталь: | IDLER PULLEY UNIT |
| Парткод: | QM3-0161-000 |
| Деталь: | GEAR, LIFT |
| Парткод: | QC2-0678-000 |
| Деталь: | CAM, LIFTER |
| Парткод: | QC2-0675-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-0676-000 |
| Деталь: | RING |
| Парткод: | QC2-0681-000 |
| Деталь: | RING |
| Парткод: | QC2-0682-000 |
| Деталь: | BUSHING, POLYPLASTICS |
| Парткод: | QC2-0683-000 |
| Деталь: | GEAR, RELEASE, IDLER |
| Парткод: | QC2-0685-000 |
| Деталь: | GEAR, LIFT, IDLER A |
| Парткод: | QC2-0686-000 |
| Деталь: | GEAR, LIFT, IDLER B |
| Парткод: | QC2-0687-000 |
| Деталь: | GEAR, LIFT, DOUBLE A |
| Парткод: | QC2-0688-000 |
| Деталь: | GEAR, LIFT, DOUBLE B |
| Парткод: | QC2-0689-000 |
| Деталь: | GEAR, LIFT, DOUBLE C |
| Парткод: | QC2-0690-000 |
| Деталь: | GEAR, RELEASE, PRESSURE |
| Парткод: | QC2-0684-000 |
| Деталь: | TUBE LEVER GUIDE UNIT |
| Парткод: | QM3-6665-000 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | SCREW, MACHINE M3X6 |
| Парткод: | XB1-2300-606 |
Коды ошибок
01841001-281A
03010000-200F
03010000-2017
03010000-2018
03010000-2820
03010000-2821
03010000-2822
03010000-2823
03010000-2E19
03010000-2E1A
03010000-2E1C
03010000-2E1D
03010000-2E1F
03010000-2F33
03016000-2010
03030000-2E21
03060000-2E14
03060000-2E16
03060200-201E
03060200-2E03
03060200-2E0B
03060A00-2E00
03060A00-2E0E
03061000-2E15
03130031-291B
03130031-2E23
03130031-2F13
03130031-2F14
03130031-2F16
03130031-2F17
03130031-2F20
03130031-2F22
03130031-2F23
03130031-2F24
03130031-2F25
03130031-2F26
03130031-2F27
03130031-2F28
03130031-2F2A
03130031-2F2B
03130031-2F2D
03130031-2F2E
03130031-2F32
03130031-2F3A
03180101-2E17
03800100-2800
03800200-2802
03800300-2801
03800400-2803
03800500-280C
03800500-2F2F
03800500-2F30
03810101-2501
03810102-2502
03810103-2503
03810104-2500
03810106-2506
03810106-2507
03810201-2581
03810202-2582
03810203-2583
03810204-2580
03810206-2586
03810206-2587
03830101-2521
03830102-2522
03830103-2523
03830104-2520
03830106-2526
03830106-2527
03830201-2541
03830202-2542
03830203-2543
03830204-2540
03830206-2546
03830206-2547
03830301-2561
03830302-2562
03830303-2563
03830304-2560
03830306-2566
03830306-2567
03841001-2819
03841101-2818
03841201-2816
03841201-2817
03860002-2E0A
03861001-2405
03861001-2406
03862000-2E09
03870001-2015
E141-4046
E144-4047
E146-4001
E161-403E
E194-404A
E196-4034
E196-4040
E196-4041
E196-4042
E196-4045
E196-4049
E196-404C
E196-404D
E196-404E
E198-401C
E198-401D
E198-401E
E199-404B
Описание
| Error code: | 01841001-281A |
| Description: | Remaining capacity of maintenance cartridge is insufficient to execute each cleaning |
| Error code: | 03010000-200F |
| Description: | Too large media |
| Error code: | 03010000-2017 |
| Description: | Multi sensor error. When media was fed, the multi sensor could not detect the media width. When the right edge of media was detected, the multi sensor detected that the media had been loaded at a wrong position. When the leading edge of media was to be detected, the multi sensor could not detect the leading edge of media. When media was fed, the multi sensor detected media smaller than the specified size. When media was fed, the multi sensor detected media larger than the specified size. When media was fed, the multi sensor detected skew greater than the specified one. When media was fed, the multi sensor could not detect the right edge of media. When media was fed, the multi sensor could not detect the left edge of media. |
| Causes: | Media, media loading method, paper path, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Media check If there is any print or stain in the detection area on the media or the media seze is not the specified one, replace the media. 2. Media loading position check If the media loading position is wrong, load the media again. 3. Visual check Remove foreign substances from multi sensor if any. 4. Multi sensor Select [SERVICE MODE]>[DISPLAY]>[SYSTEM]>[SIZE CR] to check the value read by the multi sensor. If the value is wrong, replace the multi sensor. 5. Cable continuity check If continuity of the cable between the head relay PCB and the carriage relay PCB is abnormal, replace the cable. 6. Replace the Carriage PCB 7. Cable continuity check If continuity of the cable beween the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03010000-2018 |
| Description: | Multi sensor error. When media was fed, the multi sensor could not detect the media width. When the right edge of media was detected, the multi sensor detected that the media had been loaded at a wrong position. When the leading edge of media was to be detected, the multi sensor could not detect the leading edge of media. When media was fed, the multi sensor detected media smaller than the specified size. When media was fed, the multi sensor detected media larger than the specified size. When media was fed, the multi sensor detected skew greater than the specified one. When media was fed, the multi sensor could not detect the right edge of media. When media was fed, the multi sensor could not detect the left edge of media. |
| Causes: | Media, media loading method, paper path, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Media check If there is any print or stain in the detection area on the media or the media seze is not the specified one, replace the media. 2. Media loading position check If the media loading position is wrong, load the media again. 3. Visual check Remove foreign substances from multi sensor if any. 4. Multi sensor Select [SERVICE MODE]>[DISPLAY]>[SYSTEM]>[SIZE CR] to check the value read by the multi sensor. If the value is wrong, replace the multi sensor. 5. Cable continuity check If continuity of the cable between the head relay PCB and the carriage relay PCB is abnormal, replace the cable. 6. Replace the Carriage PCB 7. Cable continuity check If continuity of the cable beween the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03010000-2820 |
| Description: | Adjustment error. Auto head alignment selected from the user menu could not be carried out because the alignment patter read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the adjustment patter read result was NG. Decentering correction selected in the service mode cannot be carried out because the correction pattern read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the head check patter read result was NG. |
| Causes: | Operation method, printhead, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Check whether the media type selected on the operation panel is the same as the type of the media used to print the adjustment pattern. If they are different, retry adjustment using the media of the type selected on the operation panel. 2. If ink bleeds greatly, change the media. 3. Carry out head cleaning, and retry adjustment. If the adjustment result is poor, replace the printhead. 4. Replace the multi sensor, and then retry adjustment. 5. Cable continuity check If continuity of the cable between the multi sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the carriage PCB. 7. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03010000-2821 |
| Description: | Adjustment error. Auto head alignment selected from the user menu could not be carried out because the alignment patter read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the adjustment patter read result was NG. Decentering correction selected in the service mode cannot be carried out because the correction pattern read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the head check patter read result was NG. |
| Causes: | Operation method, printhead, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Check whether the media type selected on the operation panel is the same as the type of the media used to print the adjustment pattern. If they are different, retry adjustment using the media of the type selected on the operation panel. 2. If ink bleeds greatly, change the media. 3. Carry out head cleaning, and retry adjustment. If the adjustment result is poor, replace the printhead. 4. Replace the multi sensor, and then retry adjustment. 5. Cable continuity check If continuity of the cable between the multi sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the carriage PCB. 7. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03010000-2822 |
| Description: | Adjustment error. Auto head alignment selected from the user menu could not be carried out because the alignment patter read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the adjustment patter read result was NG. Decentering correction selected in the service mode cannot be carried out because the correction pattern read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the head check patter read result was NG. |
| Causes: | Operation method, printhead, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Check whether the media type selected on the operation panel is the same as the type of the media used to print the adjustment pattern. If they are different, retry adjustment using the media of the type selected on the operation panel. 2. If ink bleeds greatly, change the media. 3. Carry out head cleaning, and retry adjustment. If the adjustment result is poor, replace the printhead. 4. Replace the multi sensor, and then retry adjustment. 5. Cable continuity check If continuity of the cable between the multi sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the carriage PCB. 7. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03010000-2823 |
| Description: | Adjustment error. Auto head alignment selected from the user menu could not be carried out because the alignment patter read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the adjustment patter read result was NG. Decentering correction selected in the service mode cannot be carried out because the correction pattern read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the head check patter read result was NG. |
| Causes: | Operation method, printhead, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Check whether the media type selected on the operation panel is the same as the type of the media used to print the adjustment pattern. If they are different, retry adjustment using the media of the type selected on the operation panel. 2. If ink bleeds greatly, change the media. 3. Carry out head cleaning, and retry adjustment. If the adjustment result is poor, replace the printhead. 4. Replace the multi sensor, and then retry adjustment. 5. Cable continuity check If continuity of the cable between the multi sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the carriage PCB. 7. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03010000-2E19 |
| Description: | Media feeding error |
| Error code: | 03010000-2E1A |
| Description: | Media feeding error |
| Error code: | 03010000-2E1C |
| Description: | Media cannot be ejected |
| Error code: | 03010000-2E1D |
| Description: | Media feeding error |
| Error code: | 03010000-2E1F |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03010000-2F33 |
| Description: | Adjustment error. Auto head alignment selected from the user menu could not be carried out because the alignment patter read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the adjustment patter read result was NG. Decentering correction selected in the service mode cannot be carried out because the correction pattern read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the head check patter read result was NG. |
| Causes: | Operation method, printhead, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Check whether the media type selected on the operation panel is the same as the type of the media used to print the adjustment pattern. If they are different, retry adjustment using the media of the type selected on the operation panel. 2. If ink bleeds greatly, change the media. 3. Carry out head cleaning, and retry adjustment. If the adjustment result is poor, replace the printhead. 4. Replace the multi sensor, and then retry adjustment. 5. Cable continuity check If continuity of the cable between the multi sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the carriage PCB. 7. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03016000-2010 |
| Description: | Multi sensor error. When media was fed, the multi sensor could not detect the media width. When the right edge of media was detected, the multi sensor detected that the media had been loaded at a wrong position. When the leading edge of media was to be detected, the multi sensor could not detect the leading edge of media. When media was fed, the multi sensor detected media smaller than the specified size. When media was fed, the multi sensor detected media larger than the specified size. When media was fed, the multi sensor detected skew greater than the specified one. When media was fed, the multi sensor could not detect the right edge of media. When media was fed, the multi sensor could not detect the left edge of media. |
| Causes: | Media, media loading method, paper path, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Media check If there is any print or stain in the detection area on the media or the media seze is not the specified one, replace the media. 2. Media loading position check If the media loading position is wrong, load the media again. 3. Visual check Remove foreign substances from multi sensor if any. 4. Multi sensor Select [SERVICE MODE]>[DISPLAY]>[SYSTEM]>[SIZE CR] to check the value read by the multi sensor. If the value is wrong, replace the multi sensor. 5. Cable continuity check If continuity of the cable between the head relay PCB and the carriage relay PCB is abnormal, replace the cable. 6. Replace the Carriage PCB 7. Cable continuity check If continuity of the cable beween the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03030000-2E21 |
| Description: | IEEE1394 error. The IEEE1394 interface is faulty. |
| Causes: | IEEE1394 interface board or main controller PCB. |
| Remedy: | 1. Turn off the printer, and then turn it on again. 2. IEEE1394 interface board Remove the IEEE1394 interface board, nstall it again, and then turn on the printer, If the trouble persists, replace the IEEE1394 interface board. 3. Replace the main controller PCB. |
| Error code: | 03060000-2E14 |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03060000-2E16 |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03060200-201E |
| Description: | Job requiring cassette was received when "NO" is selected for cassette pick-up on MIT |
| Error code: | 03060200-2E03 |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03060200-2E0B |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03060A00-2E00 |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03060A00-2E0E |
| Description: | Roll media unit uninstallation. The auto roll feed unit cannot be detected. |
| Causes: | Roll feed unit PCB, connector, or main controller PCB |
| Remedy: | 1. Cable continuity check If continuity of the cable between the roll feed unit PCB and the connector is abnormal, replace the cable. 2. Cable continuity check If continuity of the cable between the connector and the main controller PCB is abnormal, replace the cable. 3. Replace the roll feed unit PCB. 4. Replace the connector. 5. Replace the main controller PCB. |
| Error code: | 03061000-2E15 |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03130031-291B |
| Description: | Lift home position error. The Lift home position could not be detected within the specified time. |
| Causes: | Lift drive unit, lift cam sensor, lift motor, or main controller PCB |
| Remedy: | 1. Visual check Remove foreign substances from the lift drive unit if any. 2. Lift cam sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the lift cam sensor 3. Cable continuity check If continuity of the cable between the lift cam sensor, lift motor and main controller PCB is abnormal, replace the cable. 4. Replace the lift motor. 5. Replace the main controller PCB. |
| Error code: | 03130031-2E23 |
| Description: | Cutter unit breakdown. Abnormality occurred in the cutter unit. |
| Causes: | Cutter unit, Cutter HP sensor, cutter right position sensor, cutter lift sensor, cutter motor, cutter driver PCB, or main controller PCB |
| Remedy: | 1. Visual check Remove foreign substances from the cutter unit if any. 2. Cutter home position sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the cutter home position sensor. 3. Cutter right position sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the cutter right position sensor. 4. Cutter lift sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the cutter lift sensor. 5. Cable continuity check If continuity of the cable between the cutter HP sensor, cutter right position sensor, cutter lift sensor, cutter motor and cutter driver PCB is abnormal, replace the cable. 6. Replace the cutter motor. 7. Replace the cutter driver PCB. 8. Replace the cutter unit. 9. Cable continuity check If continuity of the cable between the cutter driver PCB and the main controller PCB is abnormal, replace the cable. 10. Replace the main controller PCB. |
| Error code: | 03130031-2F13 |
| Description: | A/D Converter external trigger output stopped. Defective main controller PCB |
| Causes: | Main controller PCB |
| Remedy: | 1. main controller PCB |
| Error code: | 03130031-2F14 |
| Description: | ASIC Register cannot be written. A main controller PCB firm ware error occurred. |
| Causes: | Main controller PCB |
| Remedy: | 1. Turn off the printer, and then turn it off again. 2. Replace the main controller PCB. |
| Error code: | 03130031-2F16 |
| Description: | Mist fan error. Mist fan rotation could not be detected during mist fan rotation. |
| Causes: | Mist fan or main controller PCB |
| Remedy: | 1. Replace the mist fan. 2. Cable continuity check If continuity of the cable between the mist fan and the main controller PCB is abnormal, replace the cable. 3. Replace the main controller PCB. |
| Error code: | 03130031-2F17 |
| Description: | Suction fan error. When the suction fan was driven, the lock signal was detected for more the specified time. |
| Causes: | Suction fan or main controller PCB |
| Remedy: | 1. suction fan Select [SERVICE MODE]>[FUNCTION]>[PLATEN FAN] to check the suction fan for normal operation. If the operation is abnormal, replace the suction fan. 2. Cable continuity check If continuity of the cable between the suction fan and the main controller PCB is abnormal, replace the cable. 3. Replace the main controller PCB. |
| Error code: | 03130031-2F20 |
| Description: | Defective sensor in purge unit. The pump cam sensor in the purge unit could not detect the home position of the purge motor within the specified time. |
| Causes: | Purge unit or main controller PCB |
| Remedy: | 1. Cable continuity check If continuity of the cable between the pump cam sensor, pump motor and main controller PCB is abnormal, replace the cable. 2. Replace the purge unit. 3. Replace the main controller PCB. |
| Error code: | 03130031-2F22 |
| Description: | Defective sensor in purge unit. The pump cam sensor in the purge unit could not detect the home position of the purge motor within the specified time. |
| Causes: | Purge unit or main controller PCB |
| Remedy: | 1. Cable continuity check If continuity of the cable between the pump cam sensor, pump motor and main controller PCB is abnormal, replace the cable. 2. Replace the purge unit. 3. Replace the main controller PCB. |
| Error code: | 03130031-2F23 |
| Description: | Defective sensor in purge unit. The pump cam sensor in the purge unit could not detect the home position of the purge motor within the specified time. |
| Causes: | Purge unit or main controller PCB |
| Remedy: | 1. Cable continuity check If continuity of the cable between the pump cam sensor, pump motor and main controller PCB is abnormal, replace the cable. 2. Replace the purge unit. 3. Replace the main controller PCB. |
| Error code: | 03130031-2F24 |
| Description: | Cutter drive time-out error. After the cutter motor was driven of the cutter unit, cutter right detection sensor or cutter HP sensor ON was not able to be detected in the regulation time. |
| Causes: | Cutter right position sensor, cutter HP sensor, cutter motor, cutter unit, cutter driver PCB, or main controller PCB |
| Remedy: | 1. Visual check Remove foreign substances from the cutter unit if any. 2. Cutter right position sensor and cutter HP sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the feed roller HP sensor. 3. Cable continuity check If continuity of the cable between the cutter right position sensor, the cutter HP sensor, the cutter motor and the cutter driver PCB is abnormal, replace the cable. 4. Replace the cutter motor. 5. Replace the cutter unit. 6. Replace the cutter driver PCB. 7. Cable continuity check If continuity of the cable between the cutter driver PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03130031-2F25 |
| Description: | Carriage home position error. The carriage home position could not be detected within the specified time. |
| Causes: | Carriage stopper, linear scale, linear encoder, carriage PCB, or main controller PCB. |
| Remedy: | 1. Visual check Remove foreign substances from the carriage stopper, the linear scale and linear encoder if any. 2. Replace the linear scale. 3. Replace the linear encoder. 4. Cable continuity check If continuity of the cable between the linear encoder and the carriage PCB is abnormal, replace the cable. 5. Replace the carriage PCB. 6. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 7. Replace the main controller PCB. |
| Error code: | 03130031-2F26 |
| Description: | Carriage motor error. The carriage did not operate because the carriage motor was overloaded due to a physical cause such as a jam. The carriage motor did not reach the specified time. |
| Causes: | Carriage path way, carriage rail, carriage belt, linear scale, linear encoder, carriage motor, carriage PCB, or main controller PCB. |
| Remedy: | 1. Carriage pathway check Remove foreign substances(jammed paper) from the carriage pathway if any. 2. Carriage rail Visually check whether the carriage rail is dirty. If the carriage rail is dirty, clean it using rail cleaner. 3. Carriage belt Visually check whether the carriage belt is loose.If the carriage belt is loose, remove it and then reinstall it. 4. Replace linear scale 5. Replace liner encoder 6. Cable continuity check If continuity of the cable between the linear encoder and the main controller PCB is abnormal, replace the cable. 7. Replace carriage motor 8. Cable continuity check If continuity of the cable between the carriage motor and the main controller PCB is abnormal, replace the cable. 9. Replace the carriage PCB 10. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 11. Replace the main controller PCB. |
| Error code: | 03130031-2F27 |
| Description: | Carriage motor error. The carriage did not operate because the carriage motor was overloaded due to a physical cause such as a jam. The carriage motor did not reach the specified time. |
| Causes: | Carriage path way, carriage rail, carriage belt, linear scale, linear encoder, carriage motor, carriage PCB, or main controller PCB. |
| Remedy: | 1. Carriage pathway check Remove foreign substances(jammed paper) from the carriage pathway if any. 2. Carriage rail Visually check whether the carriage rail is dirty. If the carriage rail is dirty, clean it using rail cleaner. 3. Carriage belt Visually check whether the carriage belt is loose.If the carriage belt is loose, remove it and then reinstall it. 4. Replace linear scale 5. Replace liner encoder 6. Cable continuity check If continuity of the cable between the linear encoder and the main controller PCB is abnormal, replace the cable. 7. Replace carriage motor 8. Cable continuity check If continuity of the cable between the carriage motor and the main controller PCB is abnormal, replace the cable. 9. Replace the carriage PCB 10. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 11. Replace the main controller PCB. |
| Error code: | 03130031-2F28 |
| Description: | Pump encode/Pump cam sensor error |
| Error code: | 03130031-2F2A |
| Description: | Feed roller home position error. During power-on, the feed roller HP sensor could not detect that the reference of Scale that exists on encoder film area color change from transparent to black. |
| Causes: | Feed roller encoder film, feed roller HP sensor, feed motor, or main controller PCB |
| Remedy: | 1. Visual check If the feed roller encoder film is damaged, replace it. Remove foreign substances from the feed roller encoder film if any. 2. Feed roller HP sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the feed roller HP sensor. 3. Cable continuity check If continuity of the cable between the feed roller HP sensor, feed motor and the main controller PCB is abnormal, replace the cable. 4. Replace the feed motor. 5. Replace the main controller PCB. |
| Error code: | 03130031-2F2B |
| Description: | Feed roller cannot operate |
| Error code: | 03130031-2F2D |
| Description: | The cassette cannot work. The cassette cannot work. |
| Causes: | Pressure plate arm, cassette cam sensor, cassette motor, or main controller PCB |
| Remedy: | 1. Visual check If the pressure plate arm is abnormal, replace the pressure plata arm. 2. Cassette cam sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation, If the operation is abnormal, replace the valve motor. 3. Cable continuity check If continuity of the cable between the cassette cam sensor, cassette motor and the main controller PCB is abnormal, replace the cable. 4. Replace the cassette motor. 5. Replace the main controller PCB. |
| Error code: | 03130031-2F2E |
| Description: | Roll drive time-out error. The roll cam sensor home position in roll feed unit could not be detected within the specified time. |
| Causes: | roll cam drive unit, roll cam sensor, roll motor, Connector, roll feed unit PCB, or main controller PCB |
| Remedy: | 1. Visual check If the gear in roll cam drive unit is abnormal, replace the gear. 2. Roll cam sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the roll cam sensor. 3. Cable continuity check If continuity of the cable between the roll cam sensor, roll motor and roll feed unit PCB is abnormal, replace the cable. 4. Replace the roll motor. 5. Replace the roll feed unit PCB. 6. Cable continuity check If continuity of the cable between the roll feed unit PCB and main controller PCB is abnormal, replace the cable. 7. Replace the connector. 8. Replace the main controller PCB. |
| Error code: | 03130031-2F32 |
| Description: | Adjustment error. Auto head alignment selected from the user menu could not be carried out because the alignment patter read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the adjustment patter read result was NG. Decentering correction selected in the service mode cannot be carried out because the correction pattern read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the head check patter read result was NG. |
| Causes: | Operation method, printhead, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Check whether the media type selected on the operation panel is the same as the type of the media used to print the adjustment pattern. If they are different, retry adjustment using the media of the type selected on the operation panel. 2. If ink bleeds greatly, change the media. 3. Carry out head cleaning, and retry adjustment. If the adjustment result is poor, replace the printhead. 4. Replace the multi sensor, and then retry adjustment. 5. Cable continuity check If continuity of the cable between the multi sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the carriage PCB. 7. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03130031-2F3A |
| Description: | Valve open/close error. When the ink supply valve opened or closed, valve open/closed detection sensor could not detect the valve cam rotation. |
| Causes: | Valve open/closed detection sensor, valve motor, or main controller PCB |
| Remedy: | 1. Visual check Remove foreign substances from the motor,gear, and sensor of the valve open/close mechanism if any. 2. Valve open/close detection sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the valve open/close detection sensor. 3. Valve motor Select [SERVICE MODE]>[FUNCTION]>[INK VALVE] to check for normal operation. If the operation is abnormal, replace the valve motor. 4. Cable continuity check If continuity of the cable between the valve open/close detection sensor, valve motor and main controller PCB is abnormal, replace the cable. 5. Replace main controller PCB. |
| Error code: | 03180101-2E17 |
| Description: | Cassette uninstallation. The cassette has come off. |
| Causes: | Cassette detection sensor or main controller PCB |
| Remedy: | 1. Cassette detection sensor Select [SEVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the cassette detection sensor. 2. Cable continuity check If continuity of the cable between the cassette detection sensor and the main controller PCB is abnormal, replace the cable. 3. Replace the main controller |
| Error code: | 03800100-2800 |
| Description: | No printhead |
| Error code: | 03800200-2802 |
| Description: | Printhead error. Improper installation of the printhead(L) was detected. A checksum error was detected in the EEPROM of the printhead(L). Unable to correct printhead(L) DI. Printhead(L) was installed right and left and oppositely. Improper installation of the printhead(R) was detected. A checksum error was detected in the EEPROM of the printhead(R). Unable to correct printhead(R) DI. Printhead(R) was installed right and left and oppositely. |
| Causes: | Printhead, carriage PCB, carriage unit, or main controller PCB. |
| Remedy: | 1. Replace the printhead. 2. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 3. Replace the carriage PCB. 4. Replace the carriage unit. 5. Replace the main controller PCB. |
| Error code: | 03800300-2801 |
| Description: | Printhead error. Improper installation of the printhead(L) was detected. A checksum error was detected in the EEPROM of the printhead(L). Unable to correct printhead(L) DI. Printhead(L) was installed right and left and oppositely. Improper installation of the printhead(R) was detected. A checksum error was detected in the EEPROM of the printhead(R). Unable to correct printhead(R) DI. Printhead(R) was installed right and left and oppositely. |
| Causes: | Printhead, carriage PCB, carriage unit, or main controller PCB. |
| Remedy: | 1. Replace the printhead. 2. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 3. Replace the carriage PCB. 4. Replace the carriage unit. 5. Replace the main controller PCB. |
| Error code: | 03800400-2803 |
| Description: | Printhead error. Improper installation of the printhead(L) was detected. A checksum error was detected in the EEPROM of the printhead(L). Unable to correct printhead(L) DI. Printhead(L) was installed right and left and oppositely. Improper installation of the printhead(R) was detected. A checksum error was detected in the EEPROM of the printhead(R). Unable to correct printhead(R) DI. Printhead(R) was installed right and left and oppositely. |
| Causes: | Printhead, carriage PCB, carriage unit, or main controller PCB. |
| Remedy: | 1. Replace the printhead. 2. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 3. Replace the carriage PCB. 4. Replace the carriage unit. 5. Replace the main controller PCB. |
| Error code: | 03800500-280C |
| Description: | Many nozzles on printhead did not inject ink |
| Error code: | 03800500-2F2F |
| Description: | Head management sensor error. The head management sensor detected a ink discharge error. A sensor sensitivity error was detected during head management sensor position adjustment. |
| Causes: | Printhead, head management sensor, or main controller PCB |
| Remedy: | 1. Replace the printhead. 2. Visual check Remove foreign substances from the head management sensor if any. 3. Replace the haed management sensor. 4. Cable continuity check If continuity of the cable between the head management sensor and the main controller PCB is abnormal, replace the cable. 5. Replace the main controller PCB. |
| Error code: | 03800500-2F30 |
| Description: | Head management sensor error. The head management sensor detected a ink discharge error. A sensor sensitivity error was detected during head management sensor position adjustment. |
| Causes: | Printhead, head management sensor, or main controller PCB |
| Remedy: | 1. Replace the printhead. 2. Visual check Remove foreign substances from the head management sensor if any. 3. Replace the haed management sensor. 4. Cable continuity check If continuity of the cable between the head management sensor and the main controller PCB is abnormal, replace the cable. 5. Replace the main controller PCB. |
| Error code: | 03810101-2501 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810102-2502 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810103-2503 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810104-2500 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810106-2506 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810106-2507 |
| Description: | No ink (MBK2) |
| Error code: | 03810201-2581 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810202-2582 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810203-2583 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810204-2580 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810206-2586 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810206-2587 |
| Description: | Remaining ink low (MBK2) |
| Error code: | 03830101-2521 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830102-2522 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830103-2523 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830104-2520 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830106-2526 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830106-2527 |
| Description: | Ink tank not installed (MBK2) |
| Error code: | 03830201-2541 |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830202-2542 |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830203-2543 |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830204-2540 |
| Description: | Ink tank ID error (BK) |
| Error code: | 03830206-2546 |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830206-2547 |
| Description: | Ink tank ID error (MBK2) |
| Error code: | 03830301-2561 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830302-2562 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830303-2563 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830304-2560 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830306-2566 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830306-2567 |
| Description: | Ink tank EEPROM error (MBK2) |
| Error code: | 03841001-2819 |
| Description: | Maintenance cartridge tank full |
| Error code: | 03841101-2818 |
| Description: | Maintenance cartridge error. The maintenance cartridge is full. The maintenance cartridge does not have the free space for various types of cleaning. No maintenance cartridge is installed. The EEPROM of the maintenance cartridge is abnormal. A maintenance cartridge ID error occurred. |
| Causes: | Maintenance cartridge, maintenance cartridge relay PCB, or main controller PCB |
| Remedy: | 1. Replace the maintenance cartridge. 2. Replace the maintenance cartridge relay PCB. 3. Cable continuity check If continuity of the cable between the maintenance cartridge relay PCB and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03841201-2816 |
| Description: | Maintenance cartridge error. The maintenance cartridge is full. The maintenance cartridge does not have the free space for various types of cleaning. No maintenance cartridge is installed. The EEPROM of the maintenance cartridge is abnormal. A maintenance cartridge ID error occurred. |
| Causes: | Maintenance cartridge, maintenance cartridge relay PCB, or main controller PCB |
| Remedy: | 1. Replace the maintenance cartridge. 2. Replace the maintenance cartridge relay PCB. 3. Cable continuity check If continuity of the cable between the maintenance cartridge relay PCB and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03841201-2817 |
| Description: | Maintenance cartridge error. The maintenance cartridge is full. The maintenance cartridge does not have the free space for various types of cleaning. No maintenance cartridge is installed. The EEPROM of the maintenance cartridge is abnormal. A maintenance cartridge ID error occurred. |
| Causes: | Maintenance cartridge, maintenance cartridge relay PCB, or main controller PCB |
| Remedy: | 1. Replace the maintenance cartridge. 2. Replace the maintenance cartridge relay PCB. 3. Cable continuity check If continuity of the cable between the maintenance cartridge relay PCB and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03860002-2E0A |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03861001-2405 |
| Description: | Borderless printing error. The position where the media is loaded is not suitable for borderless printing. The received data is not suitable for borderless printing. |
| Causes: | Operation method |
| Remedy: | 1. Check the operation method and retry printing. |
| Error code: | 03861001-2406 |
| Description: | Borderless printing error. The position where the media is loaded is not suitable for borderless printing. The received data is not suitable for borderless printing. |
| Causes: | Operation method |
| Remedy: | 1. Check the operation method and retry printing. |
| Error code: | 03862000-2E09 |
| Description: | Insufficient roll media error. The machine detected that the remaining roll media was insufficient. |
| Causes: | Roll media, feed roller HP sensor, feed roller encoder film, feed roller encoder, or main controller PCB |
| Remedy: | 1. Replace the roll media. 2. Feed roller HP sensor Check for normal operation. If the operation is abnormal, replace the feed roller HP sensor. 3. Replace the feed roller encoder film. 4. Replace the feed roller encoder. 5. Replace the main controller PCB. |
| Error code: | 03870001-2015 |
| Description: | Cut error. After roll media cutting, the multi sensor could not detect the media end. |
| Causes: | Media, multi sensor, cutter unit, cutter lifter unit, cutter drive unit, cutter driver PCB, carriage PCB, or main controller PCB |
| Remedy: | 1. Media check If there is any print or stain in the detection area on the media or the media size is not the specified one, replace the media. 2. Multi sensor Select [SERVICE MODE]>[DISPLAY]>[SYSTEM]>[SIZE CR] to check the value read by the multi sensor. If the value is wrong, replace the multi sensor. 3. Visual check Remove foreign substances from the multi sensor, the cutter unit, the cutter lifter unit, and the cutter drive unit if any. If the cutter unit, the cutter lifter unit, and the cutter drive unit is damaged or deformed, replace it. 4. Cable continuity check If continuity of the cable between the multi sensor and the carriage PCB is abnormal, replace the cable. 5. Cable continuity check If continuity of the cable between the cutter lifter unit, the cutter drive unit, and the cutter driver PCB is abnormal, replace the cable. 6. Replace the cutter driver PCB. 7. Replace the carriage PCB. 8. Replace the main controller PCB. |
| Error code: | E141-4046 |
| Description: | Recovery part revolutions reaching 50,000 cycles or more Recovery part operations have reached a predetermined count. |
| Causes: | Purge unit or main controller PCB |
| Remedy: | Check the parts counter and replace required parts. (Replacement of the parts coming to the end of their useful lives is recommended.) Initialize the counter for the replacement unit mounted. The iPF5000/500/600 have a counter problem fixed. Identify the firmware version and start in download mode to upgrade the firmware to Ver.1.13 or later from any earlier release. |
| Error code: | E144-4047 |
| Description: | Carriage count error Supply part operations have reached a predetermined count. |
| Causes: | Ink tank or main controller PCB |
| Remedy: | Check the parts counter and replace the target unit or Refresh Service Kit. Initialize the parts counter for the target unit after the replacement. |
| Error code: | E146-4001 |
| Description: | Borderless/flow pre-ejection/mist recovery count full |
| Causes: | Waste ink box, mist fan unit, platen duct or main controller PCB |
| Remedy: | Check the parts counter and replace the target unit or Refresh Service Kit. Initialize the parts counter for the target unit after the replacement. |
| Error code: | E161-403E |
| Description: | Head abnormal temperature rise (printhead 1 (R), or A model) Either of the two Di sensors maintained for each printhead chip (color-specific) has been detected at 120 degrees C or higher or -10 degrees C or lower. |
| Causes: | Printhead, carriage PCB or main controller PCB. |
| Error code: | E194-404A |
| Description: | Non-ejection count error A non-ejection part operation counter has reached a specified limit. |
| Causes: | Head management sensor or main controller PCB |
| Remedy: | Check the parts counter and replace the target unit or Refresh Service Kit. Initialize the parts counter for the target unit after the replacement. |
| Error code: | E196-4034 |
| Description: | Multisensor unit version error A different version of multisensor is installed. This would not occur in an ordinary user environment. |
| Remedy: | Replace the multisensor unit. |
| Error code: | E196-4040 |
| Description: | Checksum error The checksum of a file transmitted on execution of the firmware update is unmatched. |
| Causes: | Firmware or main controller PCB |
| Remedy: | 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB. |
| Error code: | E196-4041 |
| Description: | Flash erase error Failed to erase flash ROM on execution of the firmware update. |
| Causes: | Firmware or main controller PCB |
| Remedy: | 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB. |
| Error code: | E196-4042 |
| Description: | Flash write error Failed to write flash ROM on execution of the firmware update. |
| Causes: | Firmware or main controller PCB |
| Remedy: | 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB |
| Error code: | E196-4045 |
| Description: | Engine EEPROM write error An EEPROM read/write failure has been detected in the engine portion of the firmware. |
| Causes: | Firmware or main controller PCB |
| Remedy: | 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB. |
| Error code: | E196-4049 |
| Description: | main controller PCB error. The main controller PCB is defective. |
| Causes: | Firmware or main controller PCB |
| Remedy: | 1. Upgrade the firmware. 2. Replace the main controller PCB. |
| Error code: | E196-404C |
| Description: | Serial number information mismatch A mismatch has been detected between the serial number information stored in the EEPROM on the main controller PCB and that stored in the EEPROM on the MTC relay PCB at startup. |
| Remedy: | 1. Check to see if the correct PCB is mounted, since a PCB of the wrong model may have been mistakenly mounted during servicing. 2. Invoke service mode to implement PCB replacement. |
| Error code: | E196-404D |
| Description: | Machine ID information mismatch A mismatch has been detected between the model ID information stored in the EEPROM on the main controller PCB and that stored in the EEPROM on the MTC relay PCB at startup. |
| Remedy: | 1. Check to see if the correct PCB is mounted, since a PCB of the wrong model may have been mistakenly mounted during servicing. 2. Invoke service mode to implement PCB replacement. |
| Error code: | E196-404E |
| Description: | An EEPROM read/ write error has been detected in the controller portion of the firmware. |
| Remedy: | 1. Start in download mode to upgrade the firmware. 2. Start in service mode to clear the error. 3. Replace the main controller PCB. |
| Error code: | E198-401C |
| Description: | Faulty RTC Any error other than the two errors mentioned below has been detected while initializing the RTC at startup. |
| Causes: | Lithium battery or main controller PCB. |
| Remedy: | 1. Restart the printer in service mode. 2. Replace the main controller PCB. |
| Error code: | E198-401D |
| Description: | RTC low battery error A battery error has been detected while initializing the RTC at startup. |
| Causes: | Lithium battery or main controller PCB. |
| Remedy: | 1. Restart the printer in service mode. 2. Check the RTC battery. 3. Replace the main controller PCB. |
| Error code: | E198-401E |
| Description: | RTC clock stop The RTC has been detected idle while initializing the RTC at startup. |
| Causes: | Lithium battery or main controller PCB. |
| Remedy: | 1. Restart the printer in service mode. 2. Replace the main controller PCB. |
| Error code: | E199-404B |
| Description: | Temperature/humidity sensor error When temperature 0 and humidity 0% are detected, the detection mechanism is considered failed and an error message is displayed. |
| Remedy: | 1. Restart the printer in service mode to clear the error. 2. Identify the firmware version and update the firmware to the last release if it is earlier than Ver.1.31 (firmware defect). 3. Remove and reinsert the temperature/humidity sensor PCB connector 4. Replace the temperature/humidity sensor PCB. |
Название
CANON PFI-102MBK Картридж матово-черный
CANON PFI-102BK Картридж черный
CANON PFI-102C Картридж голубой
CANON PFI-102M Картридж пурпурный
CANON PFI-102Y Картридж желтый
CANON MC-05 Емкость для отработанных чернил
CANON PF-03 Печатающая головка
