Canon imagePROGRAF iPF5000
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
термическая струйная
Макс. формат
A2
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Макс. формат |
A2 |
Цветность печати |
цветная |
Размещение |
настольный |
Тип устройства |
Принтер |
Печать фотографий |
|
Тип |
струйный |
Копир |
|
Факс |
|
Телефон |
|
Сканер |
|
Технология печати |
термическая струйная |
Принтер |
|
Количество цветов |
6 |
Мин, объем капли |
4 пл |
Прямая печать |
|
Двусторонняя печать |
|
Пигментные чернила |
|
Печать без полей |
|
Макс, разрешение для ч/б печати |
|
| По X | 1 200 |
| По Y | 1 200 |
| По X | 2 400 |
Сканер |
|
Отправка изображения по e-mail |
|
Стандарт WIA |
|
Стандарт TWAIN |
|
Печать на: |
|
| CD/DVD |
|
| Этикетках |
|
| Конвертах |
|
| Карточках |
|
| Глянцевой бумаге |
|
| Фотобумаге |
|
| Пленках |
|
| Матовой бумаге |
|
Факс |
|
Цветной |
|
Телефон |
|
Спикерфон |
|
Проводная трубка |
|
Автоответчик |
|
Стандарт DECT |
|
Беспроводная трубка |
|
АОН |
|
Caller ID |
|
Языки управления |
|
| PostScript |
|
| PCL 5e |
|
|
|
|
| PCL 5c |
|
| PostScript 3 |
|
| PostScript 2 |
|
| PPDS |
|
| PCL 6 |
|
Подача бумаги |
|
| Стандартная | 250 |
Финишер |
|
Сортировка со сдвигом |
|
Брошюровщик |
|
Электронная сортировка |
|
Сортер |
|
Степлер |
|
Интерфейсы |
|
LPT |
|
Веб-интерфейс |
|
RS-232 |
|
Инфракрасный порт |
|
Wi-Fi |
|
Bluetooth |
|
FireWire (IEEE 1394) |
|
Устройство для чтения карт памяти |
|
USB |
|
Ethernet (RJ-45) |
|
Версия USB |
2,0 |
Память/Процессор |
|
Объем памяти |
192 |
Дополнительная информация |
|
Мин. системные требования |
Intel Pentium II |
Поддержка ОС |
|
| Linux |
|
| DOS |
|
| Mac OS |
|
| Windows |
|
Уровень шума |
|
| При работе | 49 |
Габариты |
|
Высота |
317 |
Вес |
41 |
Глубина |
733 |
Ширина |
999 |
Модули
Printer & Accessories
ELECTRICAL PART
CARRIAGE UNIT
CASSETTE
PINCH ROLLER UNIT
COVERS (1)
PLATEN & SPUR UNIT
INK SUPPLY UNIT
INK SUPPLY UNIT 2
STAND & BASKET UNIT
CUTTER UNIT
LINEAR SCALE & LIFT DRIVE UNIT
PICK-UP & FEED UNIT (2)
PICK-UP & FEED UNIT (1)
Tool
AIR FLOW FAN UNIT
ROLL UNIT
CARRIAGE & FEED MOTOR UNIT
PURGE UNIT
Детали Tool
| Деталь: | PRINTHEAD |
| Парткод: | NPN |
| Деталь: | INK TANK (MBK) |
| Парткод: | NPN |
| Деталь: | INK TANK (PBK) |
| Парткод: | NPN |
| Деталь: | INK TANK (C) |
| Парткод: | NPN |
| Деталь: | INK TANK (M) |
| Парткод: | NPN |
| Деталь: | INK TANK (Y) |
| Парткод: | NPN |
| Деталь: | INK TANK (PC) |
| Парткод: | NPN |
| Деталь: | INK TANK (PM) |
| Парткод: | NPN |
| Деталь: | INK TANK (R) |
| Парткод: | NPN |
| Деталь: | INK TANK (G) |
| Парткод: | NPN |
| Деталь: | INK TANK (B) |
| Парткод: | NPN |
| Деталь: | INK TANK (GY) |
| Парткод: | NPN |
| Деталь: | INK TANK (PGY) |
| Парткод: | NPN |
| Деталь: | STOPPER, BELT |
| Парткод: | QC2-1397-020 |
| Деталь: | BRUSH, CLEANER |
| Парткод: | FB1-0733-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1 -2688-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1-2689-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1 -2685-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1 -2682-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1-2690-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1-2686-000 |
| Деталь: | WIRE, GROUND |
| Парткод: | FH2-7092-020 |
| Деталь: | CUTTER DRIVER PCB ASSY |
| Парткод: | QM2-3424-000 |
| Деталь: | SENSOR, HUMIDITY |
| Парткод: | WP2-5187-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM3-0551-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM3-0564-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM3-0769-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM3-0758-000 |
| Деталь: | LITHIUM BATTERY |
| Парткод: | WK1-5024-000 |
| Деталь: | POWER SUPPLY ASSY |
| Парткод: | QK1 -2073-000 |
| Деталь: | POWER SUPPLY ASSY |
| Парткод: | QK1 -2074-000 |
| Деталь: | POWER SUPPLY ASSY |
| Парткод: | QK1 -2745-000 |
| Деталь: | POWER SUPPLY ASSY |
| Парткод: | QK1 -2746-000 |
| Деталь: | HARNESS, WIRE, POWER |
| Парткод: | QM3-0853-000 |
| Деталь: | HARNESS, WIRE, POWER |
| Парткод: | QM3-0940-000 |
| Деталь: | HARNESS, WIRE, POWER |
| Парткод: | QM3-0927-000 |
| Деталь: | HARNESS, WIRE, HIGROMETER |
| Парткод: | QM3-0858-000 |
| Деталь: | HOLDER, CORE, CABLE |
| Парткод: | QC2-0606-000 |
| Деталь: | HARNESS, WIRE, INLET |
| Парткод: | QM3-0863-000 |
| Деталь: | HARNESS, WIRE, 2, CROSSING |
| Парткод: | QM3-0909-000 |
| Деталь: | HARNESS, WIRE, 2, CROSSING |
| Парткод: | QM3-0880-000 |
| Деталь: | HARNESS, WIRE, 2 |
| Парткод: | QM3-0932-000 |
| Деталь: | HARNESS, WIRE, 1, CROSSING |
| Парткод: | QM3-0908-000 |
| Деталь: | HARNESS, WIRE, 1, CROSSING |
| Парткод: | QM3-0881-000 |
| Деталь: | HARNESS, WIRE, 1 |
| Парткод: | QM3-0933-000 |
| Деталь: | HARNESS, WIRE, BASE UNIT |
| Парткод: | QM3-0905-000 |
| Деталь: | HARNESS, WIRE, BASE UNIT |
| Парткод: | QM3-0895-000 |
| Деталь: | GUIDE, CABLE |
| Парткод: | QC2-0612-000 |
| Деталь: | CONNECTOR UNIT |
| Парткод: | QM3-0527-000 |
| Деталь: | CABLE, FLAT, CONTROL PANEL |
| Парткод: | QK1-2726-000 |
| Деталь: | CABLE, FLAT, CONTROL PANEL |
| Парткод: | QK1-2098-000 |
| Деталь: | RETAINING PLATE, HARNESS, WIRE |
| Парткод: | QC2-1373-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-0136-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-0262-000 |
| Деталь: | CLIP, CABLE |
| Парткод: | WT2-0317-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5701-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-0494-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5018-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5056-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5064-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5098-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5694-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5760-000 |
| Деталь: | HARNESS, WIRE, CUTTER |
| Парткод: | QM3-0857-000 |
| Деталь: | SCREW, M3X12 |
| Парткод: | QC2-1411-000 |
| Деталь: | HARNESS, WIRE |
| Парткод: | QM3-0871-000 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | WASHER, TOOTHED LOCK, M4 |
| Парткод: | XD1-4200-402 |
| Деталь: | SCREW, MACHINE M4X6 |
| Парткод: | XB1-2400-606 |
| Деталь: | CARRIAGE UNIT |
| Парткод: | QM3-0783-010 |
| Деталь: | CARRIAGE UNIT |
| Парткод: | QM3-0803-010 |
| Деталь: | CARRIAGE UNIT |
| Парткод: | QM3-0647-010 |
| Деталь: | CARRIAGE UNIT |
| Парткод: | QM3-0648-010 |
| Деталь: | FLEXIBLE CABLE ASSY |
| Парткод: | QM3-0785-000 |
| Деталь: | FLEXIBLE CABLE ASSY |
| Парткод: | QM3-0805-000 |
| Деталь: | FLEXIBLE CABLE ASSY |
| Парткод: | QM3-0650-000 |
| Деталь: | FLEXIBLE CABLE ASSY |
| Парткод: | QM3-0651-000 |
| Деталь: | BELT, CARRIAGE |
| Парткод: | QC2-4325-000 |
| Деталь: | BELT, CARRIAGE |
| Парткод: | QC2-0649-000 |
| Деталь: | BELT, CARRIAGE |
| Парткод: | QC2-0650-000 |
| Деталь: | CARRIAGE RELAY PCB ASSY |
| Парткод: | QM3-0361-000 |
| Деталь: | CARRIAGE RELAY PCB ASSY |
| Парткод: | QM2-3414-000 |
| Деталь: | CARRIAGE RELAY PCB ASSY |
| Парткод: | QM3-0351-000 |
| Деталь: | CABLE, FLEXIBLE |
| Парткод: | QK1 -2090-000 |
| Деталь: | ENCODER SENSOR UNIT |
| Парткод: | QM2-3421-010 |
| Деталь: | MULTI SENSOR UNIT |
| Парткод: | QM3-0365-000 |
| Деталь: | MULTI SENSOR UNIT |
| Парткод: | QM2-3437-000 |
| Деталь: | HEAD LEVER UNIT |
| Парткод: | QM3-0541-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QU1-2006-000 |
| Деталь: | HOLDER, LEVER, SET, PRINT HEAD |
| Парткод: | QC2-0653-000 |
| Деталь: | HOLDER, BELT |
| Парткод: | QC2-0655-000 |
| Деталь: | HOLDER, BELT |
| Парткод: | QC2-4326-000 |
| Деталь: | COVER, FFC, MULTI-SENSOR |
| Парткод: | QC2-0710-000 |
| Деталь: | GUIDE, TUBE |
| Парткод: | QC2-0759-000 |
| Деталь: | SPRING, LEAF, GROUDING |
| Парткод: | QC2-1283-000 |
| Деталь: | GUIDE, MULTI-SENSOR |
| Парткод: | QC2-1309-000 |
| Деталь: | CABLE, FLEXIBLE |
| Парткод: | QK1-2757-000 |
| Деталь: | CABLE, FLAT, MULTI-SENSOR |
| Парткод: | QK1-2091-000 |
| Деталь: | FERRITE CORE |
| Парткод: | WE8-6409-000 |
| Деталь: | HOLDER, WIRE(MECH) |
| Парткод: | QC2-0663-000 |
| Деталь: | LEVER, R, INK TUBE |
| Парткод: | QC2-0659-050 |
| Деталь: | LEVER, L, INK TUBE |
| Парткод: | QC2-0660-050 |
| Деталь: | LINK, LEVER, TUBE |
| Парткод: | QC2-0661-000 |
| Деталь: | PAD, OIL |
| Парткод: | QC2-0664-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-1396-000 |
| Деталь: | HEAD LEVER UNIT |
| Парткод: | QM3-0560-000 |
| Деталь: | ROLLER, WIRE(MECH), GUIDE |
| Парткод: | QC2-1374-000 |
| Деталь: | CLEANER UNIT, R, RAIL,CARRIAGE |
| Парткод: | QM3-0543-000 |
| Деталь: | CLEANER UNIT, L, RAIL,CARRIAGE |
| Парткод: | QM3-0542-000 |
| Деталь: | TUBE GUIDE UNIT |
| Парткод: | QM3-0704-000 |
| Деталь: | CASSETTE BASE |
| Парткод: | QM3-0181-000 |
| Деталь: | CASSETTE BASE |
| Парткод: | QM3-0779-000 |
| Деталь: | GUIDE, SIDE LIMIT, CASSETTE |
| Парткод: | QM3-0183-000 |
| Деталь: | GUIDE, END LIMIT, CASSETTE |
| Парткод: | QM3-0184-000 |
| Деталь: | PLATE UNIT,PAPER CASSETTE |
| Парткод: | QM3-0182-000 |
| Деталь: | SHEET, MYLAR |
| Парткод: | QC2-1556-020 |
| Деталь: | PINCH ROLLER UNIT 1 |
| Парткод: | QM3-0760-000 |
| Деталь: | PINCH ROLLER UNIT 1 |
| Парткод: | QM3-0517-000 |
| Деталь: | ROLLER, PINCH |
| Парткод: | QL2-2317-000 |
| Деталь: | ROLLER, PINCH |
| Парткод: | QL2-1593-000 |
| Деталь: | RING |
| Парткод: | QC2-0682-000 |
| Деталь: | LEVER, A |
| Парткод: | QC2-0982-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-0994-000 |
| Деталь: | LEVER, B |
| Парткод: | QC2-0996-000 |
| Деталь: | PINCH ROLLER UNIT 2 |
| Парткод: | QM3-0761-000 |
| Деталь: | PINCH ROLLER UNIT 2 |
| Парткод: | QM3-0518-000 |
| Деталь: | GUIDE UNIT, A2, PAPER |
| Парткод: | QM3-0522-020 |
| Деталь: | ROLLER, GUIDE, INNER |
| Парткод: | QC2-1317-000 |
| Деталь: | GUIDE ROLLER UNIT |
| Парткод: | QM3-0767-000 |
| Деталь: | GUIDE UNIT, INNER, STRAIGHT PA |
| Парткод: | QM3-0579-010 |
| Деталь: | ROLLER |
| Парткод: | QC1-2950-000 |
| Деталь: | GUIDE UNIT, OUTER, STRAIGHT PA |
| Парткод: | QM3-0581-010 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-0933-000 |
| Деталь: | FLAPPER |
| Парткод: | QC2-0934-010 |
| Деталь: | GUIDE, WASTE INK |
| Парткод: | QC2-1460-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-0981-000 |
| Деталь: | ROLLER, GUIDE |
| Парткод: | QC2-1541-000 |
| Деталь: | HOLDER, ROLLER, GUIDE |
| Парткод: | QC2-1229-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-0993-000 |
| Деталь: | TRAY UNIT |
| Парткод: | QM3-0203-000 |
| Деталь: | TRAY UNIT |
| Парткод: | QM3-0736-000 |
| Деталь: | TRAY, PAPER EJECTION |
| Парткод: | QC2-1116-000 |
| Деталь: | TRAY, DELIVERY |
| Парткод: | QC2-6518-000 |
| Деталь: | TRAY, EXTENSION, PAPER |
| Парткод: | QC2-1117-000 |
| Деталь: | TRAY, AUXILIARY |
| Парткод: | QC2-6519-000 |
| Деталь: | BASE, GUIDE, ROLL |
| Парткод: | QC2-1277-000 |
| Деталь: | GUIDE, ROLL |
| Парткод: | QC2-1278-000 |
| Деталь: | ROLL GUIDE UNIT |
| Парткод: | QM3-0745-000 |
| Деталь: | COVER, CIRCLE |
| Парткод: | QC2-1165-000 |
| Деталь: | TANK COVER UNIT |
| Парткод: | QM3-0549-000 |
| Деталь: | TANK COVER UNIT |
| Парткод: | QM3-0563-000 |
| Деталь: | TANK COVER UNIT |
| Парткод: | QM3-0762-000 |
| Деталь: | TANK COVER UNIT |
| Парткод: | QM3-0708-000 |
| Деталь: | COVER, LEFT |
| Парткод: | QC2-1123-000 |
| Деталь: | COVER, LEFT, FRONT |
| Парткод: | QC2-1139-030 |
| Деталь: | COVER, LEFT, FRONT |
| Парткод: | QC2-1122-000 |
| Деталь: | COVER, TOP, RIGHT |
| Парткод: | QC2-1178-000 |
| Деталь: | COVER, TOP, RIGHT |
| Парткод: | QC2-1166-000 |
| Деталь: | COVER, TOP, RIGHT |
| Парткод: | QC2-6537-000 |
| Деталь: | COVER, TOP, RIGHT |
| Парткод: | QC2-6514-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0626-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0205-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0627-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0206-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0766-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0765-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0744-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-0740-000 |
| Деталь: | MIST FILTER UNIT |
| Парткод: | QM3-0212-030 |
| Деталь: | COVER, FILTER |
| Парткод: | QC2-1167-000 |
| Деталь: | COVER, RIGHT |
| Парткод: | QM3-0583-030 |
| Деталь: | COVER, RIGHT |
| Парткод: | QM3-0614-030 |
| Деталь: | COVER, LOUVER |
| Парткод: | QC2-1272-000 |
| Деталь: | COVER, RIGHT, FRONT |
| Парткод: | QC2-1163-000 |
| Деталь: | COVER, RIGHT, FRONT |
| Парткод: | QC2-1176-000 |
| Деталь: | TOP COVER UNIT |
| Парткод: | QM3-0636-040 |
| Деталь: | TOP COVER UNIT |
| Парткод: | QM3-0742-030 |
| Деталь: | COVER, TOP, WINDOW |
| Парткод: | QL2-1571-050 |
| Деталь: | COVER, FRONT, UPPER |
| Парткод: | QC2-1308-000 |
| Деталь: | COVER, FRONT, UPPER |
| Парткод: | QC2-1170-000 |
| Деталь: | HOLDER, FILTER(MECH), EXHAUST |
| Парткод: | QL2-1555-000 |
| Деталь: | FILTER(MECH), AIR |
| Парткод: | QC2-1289-000 |
| Деталь: | COVER, AIR DUCT, FRONT |
| Парткод: | QC2-1271-000 |
| Деталь: | ARM |
| Парткод: | QC2-1273-000 |
| Деталь: | FILTER(MECH), INK MIST |
| Парткод: | QC2-1103-000 |
| Деталь: | ABSORBER, DRAIN, WASTE INK |
| Парткод: | QC2-1446-000 |
| Деталь: | EMBLEM, CANON LOGO |
| Парткод: | QC2-1404-000 |
| Деталь: | SCREW, TAP, BINDING HEAD, M3X8 |
| Парткод: | XB4-7300-806 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | SPUR UNIT |
| Парткод: | QM3-0592-000 |
| Деталь: | SPUR UNIT |
| Парткод: | QM3-0794-000 |
| Деталь: | SPUR MOTOR UNIT |
| Парткод: | QM3-0246-000 |
| Деталь: | PLATEN A |
| Парткод: | QL2-1579-000 |
| Деталь: | PLATEN B |
| Парткод: | QL2-1580-000 |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5624-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QA4-0292-000 |
| Деталь: | ROWEL |
| Парткод: | QA4-0880-000 |
| Деталь: | BUSHING |
| Парткод: | QC2-0866-000 |
| Деталь: | ROLLER, TRANSPORT, PAPER |
| Парткод: | QC2-0955-000 |
| Деталь: | BELT, DRIVE, PAPER EJECTION |
| Парткод: | QC2-0958-000 |
| Деталь: | PULLEY |
| Парткод: | QC2-0964-000 |
| Деталь: | RING |
| Парткод: | QC2-1395-000 |
| Деталь: | PULLEY, BELT |
| Парткод: | QC2-1569-000 |
| Деталь: | WASHER |
| Парткод: | QC1-4149-000 |
| Деталь: | BUSHING |
| Парткод: | QC2-1002-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-1396-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-1004-000 |
| Деталь: | COVER, BUSHING |
| Парткод: | QC2-1007-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-1009-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-1018-000 |
| Деталь: | GEAR, ROWEL |
| Парткод: | QC2-1024-000 |
| Деталь: | ARM, SUPPORT, ROWEL BASE |
| Парткод: | QC2-1025-000 |
| Деталь: | CAM, ROWEL |
| Парткод: | QC2-1027-000 |
| Деталь: | PLATE, REFLECTION, MULTI-SENSO |
| Парткод: | QL2-1561-000 |
| Деталь: | DUCT UNIT, PLATEN |
| Парткод: | QL2-1592-000 |
| Деталь: | DUCT UNIT, PLATEN |
| Парткод: | QM3-0802-000 |
| Деталь: | FLANGE, BELT PULLEY |
| Парткод: | QC2-1570-000 |
| Деталь: | ROLLER, DELIVERY |
| Парткод: | QL2-1566-000 |
| Деталь: | SENSOR UNIT, SPUR |
| Парткод: | QM3-0245-000 |
| Деталь: | HARNESS, WIRE, 1, SPUR |
| Парткод: | QM3-0890-000 |
| Деталь: | HARNESS, WIRE, 1, SPUR |
| Парткод: | QM3-0917-000 |
| Деталь: | HARNESS, WIRE, 2, SPUR |
| Парткод: | QM3-0891-000 |
| Деталь: | HARNESS, WIRE, 2, SPUR |
| Парткод: | QM3-0918-000 |
| Деталь: | INK SUPPLY UNIT |
| Парткод: | QM3-0738-000 |
| Деталь: | INK SUPPLY UNIT |
| Парткод: | QM3-0525-040 |
| Деталь: | INK SUPPLY UNIT |
| Парткод: | QM3-0554-040 |
| Деталь: | GUIDE, TUBE, CARRIAGE |
| Парткод: | QC2-0746-020 |
| Деталь: | IC, PHOTO INTERRUPTER, TLP1241 |
| Парткод: | WG8-5624-000 |
| Деталь: | BASE UNIT, JOINT |
| Парткод: | QM3-0584-000 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM3-0739-000 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM3-0555-050 |
| Деталь: | INK SUPPLY DRIVE UNIT |
| Парткод: | QM3-0162-000 |
| Деталь: | GEAR, VALVE 2 |
| Парткод: | QC2-0739-000 |
| Деталь: | GEAR, VALVE 3 |
| Парткод: | QC2-0740-000 |
| Деталь: | CAM, VALVE |
| Парткод: | QC2-0742-000 |
| Деталь: | BELT, TIMING |
| Парткод: | QC2-0832-000 |
| Деталь: | MOTOR, 24V, DC |
| Парткод: | QK1 -0550-000 |
| Деталь: | ABSORBER, INK, UPPER |
| Парткод: | QC2-0763-000 |
| Деталь: | ABSORBER, INK, LOWER |
| Парткод: | QC2-0764-000 |
| Деталь: | JOINT, LEVER |
| Парткод: | QC2-0758-000 |
| Деталь: | HARNESS, WIRE, INK SENSOR |
| Парткод: | QM3-0855-000 |
| Деталь: | HARNESS, WIRE, INK SENSOR |
| Парткод: | QM3-0862-000 |
| Деталь: | HARNESS, WIRE, VALVE MOTOR |
| Парткод: | QM3-0901-000 |
| Деталь: | HARNESS, WIRE, VALVE MOTOR |
| Парткод: | QM3-0872-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0935-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0902-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0873-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0924-000 |
| Деталь: | HARNESS, WIRE, 2, INK TANK |
| Парткод: | QM3-0874-000 |
| Деталь: | HARNESS, WIRE, 2, INK TANK |
| Парткод: | QM3-0925-000 |
| Деталь: | HARNESS, WIRE, ROM, INK TANK |
| Парткод: | QM3-0903-000 |
| Деталь: | HARNESS, WIRE, ROM, INK TANK |
| Парткод: | QM3-0875-000 |
| Деталь: | HARNESS, WIRE, SENSOR, VALVE |
| Парткод: | QM3-0914-000 |
| Деталь: | HARNESS, WIRE, SENSOR, VALVE |
| Парткод: | QM3-0886-000 |
| Деталь: | GUIDE, INK TUBE |
| Парткод: | QC2-1375-000 |
| Деталь: | HARNESS, WIRE, FEED |
| Парткод: | QM3-0928-000 |
| Деталь: | SCREW, BINDING HEAD, M2.6X4 |
| Парткод: | XB1-2260-409 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | SCREW, TAP, BINDING HEAD, M3X8 |
| Парткод: | XB4-7300-806 |
| Деталь: | INK SUPPLY UNIT |
| Парткод: | QM3-0738-000 |
| Деталь: | INK SUPPLY UNIT |
| Парткод: | QM3-0525-040 |
| Деталь: | INK SUPPLY UNIT |
| Парткод: | QM3-0554-040 |
| Деталь: | GUIDE, TUBE, CARRIAGE |
| Парткод: | QC2-0746-020 |
| Деталь: | IC, PHOTO INTERRUPTER, TLP1241 |
| Парткод: | WG8-5624-000 |
| Деталь: | BASE UNIT, JOINT |
| Парткод: | QM3-0584-000 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM3-0739-000 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM3-0555-050 |
| Деталь: | INK SUPPLY DRIVE UNIT |
| Парткод: | QM3-0162-000 |
| Деталь: | GEAR, VALVE 2 |
| Парткод: | QC2-0739-000 |
| Деталь: | GEAR, VALVE 3 |
| Парткод: | QC2-0740-000 |
| Деталь: | CAM, VALVE |
| Парткод: | QC2-0742-000 |
| Деталь: | BELT, TIMING |
| Парткод: | QC2-0832-000 |
| Деталь: | MOTOR, 24V, DC |
| Парткод: | QK1 -0550-000 |
| Деталь: | ABSORBER, INK, UPPER |
| Парткод: | QC2-0763-000 |
| Деталь: | ABSORBER, INK, LOWER |
| Парткод: | QC2-0764-000 |
| Деталь: | JOINT, LEVER |
| Парткод: | QC2-0758-000 |
| Деталь: | HARNESS, WIRE, INK SENSOR |
| Парткод: | QM3-0855-000 |
| Деталь: | HARNESS, WIRE, INK SENSOR |
| Парткод: | QM3-0862-000 |
| Деталь: | HARNESS, WIRE, VALVE MOTOR |
| Парткод: | QM3-0901-000 |
| Деталь: | HARNESS, WIRE, VALVE MOTOR |
| Парткод: | QM3-0872-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0935-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0902-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0873-000 |
| Деталь: | HARNESS, WIRE, INK TANK |
| Парткод: | QM3-0924-000 |
| Деталь: | HARNESS, WIRE, 2, INK TANK |
| Парткод: | QM3-0874-000 |
| Деталь: | HARNESS, WIRE, 2, INK TANK |
| Парткод: | QM3-0925-000 |
| Деталь: | HARNESS, WIRE, ROM, INK TANK |
| Парткод: | QM3-0903-000 |
| Деталь: | HARNESS, WIRE, ROM, INK TANK |
| Парткод: | QM3-0875-000 |
| Деталь: | HARNESS, WIRE, SENSOR, VALVE |
| Парткод: | QM3-0914-000 |
| Деталь: | HARNESS, WIRE, SENSOR, VALVE |
| Парткод: | QM3-0886-000 |
| Деталь: | GUIDE, INK TUBE |
| Парткод: | QC2-1375-000 |
| Деталь: | HARNESS, WIRE, FEED |
| Парткод: | QM3-0928-000 |
| Деталь: | SCREW, BINDING HEAD, M2.6X4 |
| Парткод: | XB1-2260-409 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | SCREW, TAP, BINDING HEAD, M3X8 |
| Парткод: | XB4-7300-806 |
| Деталь: | BASKET |
| Парткод: | QC2-4341-000 |
| Деталь: | ROD, BASKET, REAR |
| Парткод: | QC2-4342-000 |
| Деталь: | ROD, BASKET, FRONT |
| Парткод: | QC2-4343-000 |
| Деталь: | JOINT, ROD |
| Парткод: | QC2-4346-000 |
| Деталь: | BAND, FIXING |
| Парткод: | QC2-4359-000 |
| Деталь: | SCREW, HEX SOCKET, M4X30 |
| Парткод: | QC2-5993-000 |
| Деталь: | BOX, ACCESSORY |
| Парткод: | QC2-5995-000 |
| Деталь: | CAP, STAND |
| Парткод: | QC2-4348-000 |
| Деталь: | CASTER |
| Парткод: | QC2-4350-000 |
| Деталь: | CASTER, W/STOPPER |
| Парткод: | QC2-4351-000 |
| Деталь: | STACK ROD UNIT |
| Парткод: | QM3-0684-000 |
| Деталь: | HOLDER, ROD |
| Парткод: | QC2-4333-000 |
| Деталь: | ROD, BASKET, SIDE |
| Парткод: | QC2-4334-000 |
| Деталь: | CAP, ROD |
| Парткод: | QC2-4335-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-6030-000 |
| Деталь: | FOOT, RUBBER |
| Парткод: | QC2-4338-000 |
| Деталь: | SCREW, ALLEN, M8X20 |
| Парткод: | QC1-5141-000 |
| Деталь: | CUTTER UNIT |
| Парткод: | QM3-0732-010 |
| Деталь: | HARNESS, WIRE, LIFT MOTOR, CUT |
| Парткод: | QM3-0867-000 |
| Деталь: | HARNESS, WIRE, COVER |
| Парткод: | QM3-0913-000 |
| Деталь: | HARNESS, WIRE, COVER |
| Парткод: | QM3-0878-000 |
| Деталь: | HARNESS, WIRE, COVER |
| Парткод: | QM3-0934-000 |
| Деталь: | HARNESS, WIRE, COVER |
| Парткод: | QM3-0898-000 |
| Деталь: | CUTTER LIFTER DRIVE UNIT |
| Парткод: | QM3-0600-010 |
| Деталь: | CUTTER LIFTER DRIVE UNIT |
| Парткод: | QM3-0601-010 |
| Деталь: | CUTTER LIFTER DRIVE UNIT |
| Парткод: | QM3-0771-010 |
| Деталь: | CUTTER LIFTER DRIVE UNIT |
| Парткод: | QM3-0757-010 |
| Деталь: | CUTTER DRIVE UNIT |
| Парткод: | QM3-0585-010 |
| Деталь: | BELT, TIMING |
| Парткод: | QC1-4850-000 |
| Деталь: | MOTOR, DC24V |
| Парткод: | QK1 -0550-000 |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5624-000 |
| Деталь: | MICRO SWITCH |
| Парткод: | WC4-5052-000 |
| Деталь: | LEVER, SENSOR |
| Парткод: | QC2-1274-000 |
| Деталь: | BELT, TIMING |
| Парткод: | QC2-0832-000 |
| Деталь: | SCREW, BH 2.6X4 |
| Парткод: | XB1-2260-409 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | MOTOR, 24V, DC |
| Парткод: | QK1 -0440-000 |
| Деталь: | SCALE, LINEAR |
| Парткод: | QC3-1887-000 |
| Деталь: | SCALE, LINEAR |
| Парткод: | QC3-1888-000 |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5624-000 |
| Деталь: | IDLER PULLEY UNIT |
| Парткод: | QM3-0161-000 |
| Деталь: | GEAR, LIFT |
| Парткод: | QC2-0678-000 |
| Деталь: | CAM, LIFTER |
| Парткод: | QC2-0675-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-0676-000 |
| Деталь: | RING |
| Парткод: | QC2-0681-000 |
| Деталь: | RING |
| Парткод: | QC2-0682-000 |
| Деталь: | BUSHING, POLYPLASTICS |
| Парткод: | QC2-0683-000 |
| Деталь: | GEAR, RELEASE, IDLER |
| Парткод: | QC2-0685-000 |
| Деталь: | GEAR, LIFT, IDLER A |
| Парткод: | QC2-0686-000 |
| Деталь: | GEAR, LIFT, IDLER B |
| Парткод: | QC2-0687-000 |
| Деталь: | GEAR, LIFT, DOUBLE A |
| Парткод: | QC2-0688-000 |
| Деталь: | GEAR, LIFT, DOUBLE B |
| Парткод: | QC2-0689-000 |
| Деталь: | GEAR, LIFT, DOUBLE C |
| Парткод: | QC2-0690-000 |
| Деталь: | GEAR, RELEASE, PRESSURE |
| Парткод: | QC2-0684-000 |
| Деталь: | TUBE LEVER GUIDE UNIT |
| Парткод: | QM3-6665-000 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | SCREW, MACHINE M3X6 |
| Парткод: | XB1-2300-606 |
| Деталь: | TORQUE LIMITTER |
| Парткод: | QC2-0884-000 |
| Деталь: | RUBBER UNIT, SEPARATE |
| Парткод: | QM3-0631-000 |
| Деталь: | CASSETTE SENSOR UNIT |
| Парткод: | QM3-0526-000 |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5624-000 |
| Деталь: | LEVER, RELEASE |
| Парткод: | QC2-0872-000 |
| Деталь: | GEAR, CAM, SEPARATION |
| Парткод: | QC2-0873-010 |
| Деталь: | LEVER, RETURN |
| Парткод: | QC2-0874-000 |
| Деталь: | ARM, LEVER, RETURN |
| Парткод: | QC2-0875-000 |
| Деталь: | LEVER, PAPER FEED |
| Парткод: | QC2-0876-000 |
| Деталь: | ROLLER, GUIDE, INNER |
| Парткод: | QC2-1317-000 |
| Деталь: | COVER, LEVER, RETURN |
| Парткод: | QC2-1324-000 |
| Деталь: | LEVER, PAPER SENSOR, CASSETTE |
| Парткод: | QC2-0938-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-0878-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-0879-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-0888-000 |
| Деталь: | BUSHING |
| Парткод: | QC2-0866-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5694-000 |
| Деталь: | ROLLER, FEED |
| Парткод: | QC2-0930-000 |
| Деталь: | GUIDE, INNER, PAPER |
| Парткод: | QC2-0941-000 |
| Деталь: | GUIDE UNIT, L, INNER, PAPER PA |
| Парткод: | QM3-0632-000 |
| Деталь: | HARNESS, WIRE, PAPER SENSE |
| Парткод: | QM3-0865-000 |
| Деталь: | HARNESS, WIRE, CASSETTE SENSE |
| Парткод: | QM3-0866-000 |
| Деталь: | HARNESS, WIRE, CASSETTE |
| Парткод: | QM3-0907-000 |
| Деталь: | HARNESS, WIRE, CASSETTE |
| Парткод: | QM3-0946-000 |
| Деталь: | HARNESS, WIRE, CASSETTE |
| Парткод: | QM3-0879-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5056-000 |
| Деталь: | WASHER |
| Парткод: | QC1-4149-000 |
| Деталь: | PIN DOWEL |
| Парткод: | XD3-2200-122 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | PIN, SPRING, 2X10 |
| Парткод: | XD3-1200-102 |
| Деталь: | PIN, STRAIGHT, 2X8 |
| Парткод: | XD3-2200-082 |
| Деталь: | ROLLER, PICK-UP |
| Парткод: | QM3-0619-000 |
| Деталь: | ENCODER SENSOR UNIT |
| Парткод: | QM2-3422-000 |
| Деталь: | MOTOR, DC24V |
| Парткод: | QK1 -0550-000 |
| Деталь: | BELT, TIMING |
| Парткод: | QC2-1455-000 |
| Деталь: | WHEEL, CODE |
| Парткод: | QC3-1886-000 |
| Деталь: | WHEEL, CODE |
| Парткод: | QC1-4851-000 |
| Деталь: | RING |
| Парткод: | QC2-0682-000 |
| Деталь: | ROLLER, PICK-UP, PAPER |
| Парткод: | QC2-0862-000 |
| Деталь: | ROLLER, PICK-UP, PAPER |
| Парткод: | QC2-0863-000 |
| Деталь: | GEAR, DRIVE, PAPER FEED |
| Парткод: | QC2-0864-000 |
| Деталь: | GEAR, CAM, PAPER FEED |
| Парткод: | QC2-0865-010 |
| Деталь: | BUSHING |
| Парткод: | QC2-0866-000 |
| Деталь: | LEVER, CAM, PAPER CASSETTE |
| Парткод: | QC2-0867-000 |
| Деталь: | SPRING, R, COMPRESSION |
| Парткод: | QC2-0868-000 |
| Деталь: | SPRING, L, COMPRESSION |
| Парткод: | QC2-0869-000 |
| Деталь: | SPRING, EARTH, PAPER CASSETTE |
| Парткод: | QC2-0887-000 |
| Деталь: | GEAR, PENDULUM, PAPER CASSETTE |
| Парткод: | QC2-0891-000 |
| Деталь: | GEAR, PAPER CASSETTE |
| Парткод: | QC2-0892-000 |
| Деталь: | WASHER |
| Парткод: | QC1-4149-000 |
| Деталь: | RING, PUSH |
| Парткод: | XA9-0135-000 |
| Деталь: | GEAR, IDLER |
| Парткод: | QC2-0895-000 |
| Деталь: | GEAR, CAM, RELEASE |
| Парткод: | QC2-0900-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-0902-000 |
| Деталь: | CAM, RELEASE |
| Парткод: | QC2-0903-000 |
| Деталь: | SPRING, PLATE, PAPER CASSETTE |
| Парткод: | QC2-0918-000 |
| Деталь: | BUSHING |
| Парткод: | WT2-0270-000 |
| Деталь: | BASE, PENDULUM |
| Парткод: | QC2-0889-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-0890-000 |
| Деталь: | GEAR, 17T/77T |
| Парткод: | QC2-1451-000 |
| Деталь: | GEAR, 20T/61T |
| Парткод: | QC2-1452-000 |
| Деталь: | BELT, TIMING |
| Парткод: | QC2-0832-000 |
| Деталь: | 999 |
| Парткод: | 999-9999-999 |
| Деталь: | LUBE, FLOIL G-5000H, GREASE |
| Парткод: | FY9-6022-000 |
| Деталь: | GREASE, EU-1 |
| Парткод: | QY9-0037-000 |
| Деталь: | ADJUSTING UNIT, CR WIRE |
| Парткод: | AY3-4493-000 |
| Деталь: | SUCTION FAN UNIT |
| Парткод: | QM3-0701-010 |
| Деталь: | SUCTION FAN UNIT |
| Парткод: | QM3-0179-010 |
| Деталь: | FAN |
| Парткод: | QK1-2084-000 |
| Деталь: | FAN |
| Парткод: | QK1-1386-000 |
| Деталь: | AIR DUCT, 2 |
| Парткод: | QM3-0187-000 |
| Деталь: | SEAL, AIR DUCT |
| Парткод: | QC2-1076-000 |
| Деталь: | SEAL, 3, AIR DUCT |
| Парткод: | QC2-1079-000 |
| Деталь: | AIR DUCT, 3 |
| Парткод: | QC2-1070-000 |
| Деталь: | AIR DUCT, 3 |
| Парткод: | QC2-1071-000 |
| Деталь: | AIR DUCT, 1 |
| Парткод: | QL2-1537-000 |
| Деталь: | HARNESS, WIRE, FAN, PLATEN |
| Парткод: | QM3-0864-000 |
| Деталь: | FRONT DUCT UNIT |
| Парткод: | QM3-0208-000 |
| Деталь: | M/C RELAY PCB ASSY |
| Парткод: | QM3-0550-000 |
| Деталь: | COVER, ROLL |
| Парткод: | QC2-1255-000 |
| Деталь: | COVER, ROLL, LEFT |
| Парткод: | QC2-1385-000 |
| Деталь: | COVER, ROLL, RIGHT |
| Парткод: | QC2-1386-000 |
| Деталь: | TRAY, MANUAL PAPER FEED |
| Парткод: | QC2-1259-000 |
| Деталь: | TRAY, MANUAL PAPER FEED |
| Парткод: | QC2-6523-000 |
| Деталь: | GUIDE, SIDE, PAPER |
| Парткод: | QC2-1261-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-1262-000 |
| Деталь: | SLIDE PIECE, GUIDE |
| Парткод: | QC2-1310-000 |
| Деталь: | HOLDER, ROLL |
| Парткод: | QC2-1222-000 |
| Деталь: | SCREW, TAP M3X6 |
| Парткод: | XA9-0863-000 |
| Деталь: | SPACER, HOLDER, ROLL |
| Парткод: | QC2-1223-000 |
| Деталь: | ROLL SHAFT UNIT |
| Парткод: | QM3-0215-000 |
| Деталь: | ROLL SHAFT UNIT |
| Парткод: | QM3-0756-000 |
| Деталь: | CAP, ROLL, LEFT |
| Парткод: | QC2-1263-000 |
| Деталь: | CAP, ROLL, RIGHT |
| Парткод: | QC2-1264-000 |
| Деталь: | CASE, ROLL, LEFT |
| Парткод: | QC2-1257-000 |
| Деталь: | CASE, R, ROLL |
| Парткод: | QC2-1258-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | QK1-2081-000 |
| Деталь: | PCB ASSY, DRIVER, ROLL UNIT |
| Парткод: | QM2-3428-010 |
| Деталь: | HOLDER UNIT, LEFT, ROLL HOLDER |
| Парткод: | QM3-0226-000 |
| Деталь: | HOLDER UNIT, RIGHT, ROLL HOLDE |
| Парткод: | QM3-0227-000 |
| Деталь: | ROLLER RELEASE UNIT |
| Парткод: | QM3-0225-000 |
| Деталь: | ROLLER RELEASE UNIT |
| Парткод: | QM3-0752-000 |
| Деталь: | SENSOR UNIT, DETECTION, ROLL |
| Парткод: | QM3-0231-000 |
| Деталь: | IC, PHOTO INTERRUPTER, TLP1241 |
| Парткод: | WG8-5624-000 |
| Деталь: | FEED ROLLER UNIT |
| Парткод: | QM3-0229-000 |
| Деталь: | FEED ROLLER UNIT |
| Парткод: | QM3-0754-000 |
| Деталь: | BUSHING |
| Парткод: | QC2-1189-000 |
| Деталь: | SCREW, M3X12 |
| Парткод: | QC2-1411-000 |
| Деталь: | BUSHING |
| Парткод: | QC2-1231-000 |
| Деталь: | SPRING, LEAF, GROUNDING |
| Парткод: | QC2-1236-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-1381-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC2-1234-000 |
| Деталь: | SENSOR UNIT, CAM, ROLL |
| Парткод: | QM3-0221-000 |
| Деталь: | GEAR, PENDULUM, TOP |
| Парткод: | QC2-1211-000 |
| Деталь: | GEAR, PENDULUM, BOTTOM |
| Парткод: | QC2-1244-000 |
| Деталь: | PENDULUM UNIT, LOWER, ROLL |
| Парткод: | QM3-0223-030 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-1210-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC2-6569-000 |
| Деталь: | GEAR, PENDULUM, 1 |
| Парткод: | QC2-1212-020 |
| Деталь: | GEAR |
| Парткод: | QC2-1238-000 |
| Деталь: | GEAR |
| Парткод: | QC2-1214-000 |
| Деталь: | PENDULUM UNIT, UPPER, ROLL |
| Парткод: | QM3-0222-030 |
| Деталь: | PENDULUM UNIT, UPPER, ROLL |
| Парткод: | QM3-0776-010 |
| Деталь: | GEAR |
| Парткод: | QC2-1213-000 |
| Деталь: | PENDULUM UNIT, 2, ROLL |
| Парткод: | QM3-0224-000 |
| Деталь: | GEAR, PENDULUM, 2 |
| Парткод: | QC2-1240-000 |
| Деталь: | HARNESS, WIRE, ROLL UNIT |
| Парткод: | QM3-0868-000 |
| Деталь: | HARNESS, WIRE, SENSOR, ROLL |
| Парткод: | QM3-0869-000 |
| Деталь: | WASHER |
| Парткод: | QC1-0710-000 |
| Деталь: | WASHER |
| Парткод: | QC1-4149-000 |
| Деталь: | ROLLER, GUIDE |
| Парткод: | QC2-1541-000 |
| Деталь: | HOLDER, ROLLER |
| Парткод: | QC2-1191-000 |
| Деталь: | SCREW, TP, M3X10 |
| Парткод: | XA9-0831-000 |
| Деталь: | HOLDER, ROLL, LEFT, 2 |
| Парткод: | QL2-1585-000 |
| Деталь: | HOLDER, ROLL, LEFT, 1 |
| Парткод: | QM3-0628-000 |
| Деталь: | HOLDER, ROLL, LEFT, 1 |
| Парткод: | QM3-5311-000 |
| Деталь: | HOLDER, ROLL |
| Парткод: | QC2-6270-000 |
| Деталь: | HOLDER, ROLL, LEFT, 2 |
| Парткод: | QM3-0717-000 |
| Деталь: | RING |
| Парткод: | QC2-4327-000 |
| Деталь: | GEAR, PENDULUM, 1 |
| Парткод: | QC2-6568-000 |
| Деталь: | MOTOR, 26.4V, DC |
| Парткод: | QK1 -0447-000 |
| Деталь: | MOTOR, DC BRUSHLESS |
| Парткод: | QK1-2080-000 |
| Деталь: | MOTOR, DC BRUSHLESS |
| Парткод: | QK1-2082-000 |
| Деталь: | MOTOR, DC BRUSHLESS |
| Парткод: | QK1 -2083-000 |
| Деталь: | SENSOR UNIT, LINE FEED |
| Парткод: | QM2-3420-000 |
| Деталь: | BELT, DRIVE, PAPER TRANSPORT |
| Парткод: | QC2-0957-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-1396-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-0985-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC2-0990-000 |
| Деталь: | WHEEL, CODE |
| Парткод: | QC3-1885-000 |
| Деталь: | COVER, CODE WHEEL |
| Парткод: | QC2-0995-000 |
| Деталь: | SENSOR UNIT, HOME POSITION, LI |
| Парткод: | QM2-3423-000 |
| Деталь: | FLANGE, PULLEY |
| Парткод: | QC2-0998-000 |
| Деталь: | SCREW, BINDING HEAD, M2X5 |
| Парткод: | XB1-2200-506 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | GUIDE, MAINTENANCE CARTRIDGE |
| Парткод: | QC2-1110-000 |
| Деталь: | HARNESS, WIRE, HEAD MANAGEMENT |
| Парткод: | QM3-0904-000 |
| Деталь: | HARNESS, WIRE, HEAD MANAGEMENT |
| Парткод: | QM3-0876-000 |
| Деталь: | JOINT, TUBE |
| Парткод: | QC2-1323-000 |
| Деталь: | PURGE KIT |
| Парткод: | QM3-0653-080 |
| Деталь: | PURGE KIT |
| Парткод: | QM3-0654-050 |
| Деталь: | HEAD MANAGEMENT SENSOR |
| Парткод: | QM3-0529-000 |
| Деталь: | ABSORBER, INK, FAN |
| Парткод: | QC2-1100-000 |
| Деталь: | ABSORBER, WASTE INK |
| Парткод: | QC2-0806-000 |
| Деталь: | JOINT, INK TUBE, PURGE UNIT |
| Парткод: | QC2-0833-020 |
| Деталь: | MIST FAN UNIT |
| Парткод: | QM3-0210-000 |
| Деталь: | MIST FAN UNIT |
| Парткод: | QM3-0211-000 |
| Деталь: | MIST FAN UNIT |
| Парткод: | QM3-0799-000 |
| Деталь: | MIST FAN UNIT |
| Парткод: | QM3-0792-000 |
| Деталь: | FAN |
| Парткод: | QK1-1440-000 |
| Деталь: | FAN |
| Парткод: | QK1-2086-000 |
| Деталь: | TUBE JOINT UNIT |
| Парткод: | QM3-6676-000 |
| Деталь: | JOINT, INK TUBE, PURGE UNIT |
| Парткод: | QC3-2876-000 |
| Деталь: | SCREW, TP, M3X6 |
| Парткод: | XB6-7300-606 |
| Деталь: | SCREW, TAP, BINDING HEAD, M3X8 |
| Парткод: | XB4-7300-806 |
Коды ошибок
01800500-1012
01800500-1013
01841001-281B
03010000-200C
03010000-200D
03010000-2017
03010000-2018
03010000-2820
03010000-2821
03010000-2822
03010000-2823
03010000-2E1F
03010000-2E25
03010000-2E27
03010000-2F33
03016000-2010
03030000-2E21
03060000-2E14
03060000-2E16
03060200-2E03
03060200-2E0B
03060A00-2E00
03060A00-2E01
03060A00-2E0E
03060A00-2E1B
03061000-2E15
03130031-291B
03130031-291D
03130031-2E23
03130031-2F13
03130031-2F14
03130031-2F16
03130031-2F17
03130031-2F20
03130031-2F22
03130031-2F23
03130031-2F24
03130031-2F25
03130031-2F26
03130031-2F27
03130031-2F2A
03130031-2F2D
03130031-2F2E
03130031-2F32
03130031-2F3A
03180003-2E22
03180101-2E17
03800200-2802
03800200-2804
03800201-280A
03800202-2807
03800204-2540
03800300-2801
03800301-2809
03800400-2803
03800401-280B
03800500-2F2F
03800500-2F30
03810101-2501
03810102-2502
03810103-2503
03810104-2500
03810105-2508
03810106-2506
03810107-250A
03810108-250C
03810109-250B
03810112-2504
03810113-2505
03810115-2509
03810201-2581
03810201-2591
03810202-2582
03810202-2592
03810203-2583
03810203-2593
03810204-2580
03810204-2590
03810205-2588
03810205-2598
03810206-2586
03810207-258A
03810207-259A
03810208-258C
03810208-259C
03810209-258B
03810209-259B
03810212-2584
03810213-2585
03810213-2595
03810215-2589
03810215-2599
03830101-2521
03830102-2522
03830103-2523
03830104-2520
03830105-2528
03830106-2526
03830107-252A
03830108-252C
03830109-252B
03830112-2524
03830113-2525
03830115-2529
03830201-2541
03830202-2542
03830203-2543
03830205-2548
03830206-2546
03830207-254A
03830208-254C
03830209-254B
03830212-2544
03830213-2545
03830215-2549
03830301-2561
03830302-2562
03830303-2563
03830304-2560
03830305-2568
03830306-2566
03830307-256A
03830308-256C
03830309-256B
03830312-2564
03830313-2565
03830315-2569
03841101-2818
03841201-2816
03841201-2817
03860002-2E0A
03861001-2405
03861001-2406
03862000-2E09
03870001-2015
3130031-2F28
3810206-2596
3810212-2594
3841001-2819
E141-4046
E144-4047
E146-4001
E161-403E
E194-4034
E194-404A
E196-403F
E196-4040
E196-4041
E196-4042
E196-4045
E196-4049
E198-401C
E198-401D
E198-401E
Описание
| Error code: | 01800500-1012 |
| Description: | Defective printhead nozzleMany non-discharging nozzles of the printhead(L) were detected. Many non-discharging nozzles of the printhead(R) were detected. |
| Causes: | Printhead or head management sensor |
| Remedy: | 1. Clean the printhead. 2. Replace the printhead. 3. Replace the head management sensor. |
| Error code: | 01800500-1013 |
| Description: | Defective printhead nozzle. Many non-discharging nozzles of the printhead(L) were detected. Many non-discharging nozzles of the printhead(R) were detected. |
| Causes: | Printhead or head management sensor |
| Remedy: | 1. Clean the printhead. 2. Replace the printhead. 3. Replace the head management sensor. |
| Error code: | 01841001-281B |
| Description: | Maintenance cartridge error. The maintenance cartridge is full. The maintenance cartridge does not have the free space for various types of cleaning. No maintenance cartridge is installed. The EEPROM of the maintenance cartridge is abnormal. A maintenance cartridge ID error occurred. |
| Causes: | Maintenance cartridge, maintenance cartridge relay PCB, or main controller PCB |
| Remedy: | 1. Replace the maintenance cartridge. 2. Replace the maintenance cartridge relay PCB. 3. Cable continuity check If continuity of the cable between the maintenance cartridge relay PCB and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03010000-200C |
| Description: | Multi sensor error. When media was fed, the multi sensor could not detect the media width. When the right edge of media was detected, the multi sensor detected that the media had been loaded at a wrong position. When the leading edge of media was to be detected, the multi sensor could not detect the leading edge of media. When media was fed, the multi sensor detected media smaller than the specified size. When media was fed, the multi sensor detected media larger than the specified size. When media was fed, the multi sensor detected skew greater than the specified one. When media was fed, the multi sensor could not detect the right edge of media. When media was fed, the multi sensor could not detect the left edge of media. |
| Causes: | Media, media loading method, paper path, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Media check If there is any print or stain in the detection area on the media or the media seze is not the specified one, replace the media. 2. Media loading position check If the media loading position is wrong, load the media again. 3. Visual check Remove foreign substances from multi sensor if any. 4. Multi sensor Select [SERVICE MODE]>[DISPLAY]>[SYSTEM]>[SIZE CR] to check the value read by the multi sensor. If the value is wrong, replace the multi sensor. 5. Cable continuity check If continuity of the cable between the head relay PCB and the carriage relay PCB is abnormal, replace the cable. 6. Replace the Carriage PCB 7. Cable continuity check If continuity of the cable beween the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03010000-200D |
| Description: | Cut sheet end cannot be detected. When cut media was fed by the specified length, the media sensor could not detect the trailing edge of the cut media. During printing, the media sensor detected the trailing edge of the cut media at the position different from that detected during cut media feed. |
| Causes: | Paper path, media sensor, or main controller PCB |
| Remedy: | 1. Visual check Remove foreign substances from the paper path and media sensor if any. If the paper feed surface or moving part of the paper path is damaged or deformed, replace the paper path. 2. Media sensor Check the media sensor for normal operation. If the operation is abnormal, replace the media sensor. 3. Cable continuity check If continuity of the cable between the madia sensor and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03010000-2017 |
| Description: | Multi sensor error. When media was fed, the multi sensor could not detect the media width. When the right edge of media was detected, the multi sensor detected that the media had been loaded at a wrong position. When the leading edge of media was to be detected, the multi sensor could not detect the leading edge of media. When media was fed, the multi sensor detected media smaller than the specified size. When media was fed, the multi sensor detected media larger than the specified size. When media was fed, the multi sensor detected skew greater than the specified one. When media was fed, the multi sensor could not detect the right edge of media. When media was fed, the multi sensor could not detect the left edge of media. |
| Causes: | Media, media loading method, paper path, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Media check If there is any print or stain in the detection area on the media or the media seze is not the specified one, replace the media. 2. Media loading position check If the media loading position is wrong, load the media again. 3. Visual check Remove foreign substances from multi sensor if any. 4. Multi sensor Select [SERVICE MODE]>[DISPLAY]>[SYSTEM]>[SIZE CR] to check the value read by the multi sensor. If the value is wrong, replace the multi sensor. 5. Cable continuity check If continuity of the cable between the head relay PCB and the carriage relay PCB is abnormal, replace the cable. 6. Replace the Carriage PCB 7. Cable continuity check If continuity of the cable beween the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03010000-2018 |
| Description: | Multi sensor error. When media was fed, the multi sensor could not detect the media width. When the right edge of media was detected, the multi sensor detected that the media had been loaded at a wrong position. When the leading edge of media was to be detected, the multi sensor could not detect the leading edge of media. When media was fed, the multi sensor detected media smaller than the specified size. When media was fed, the multi sensor detected media larger than the specified size. When media was fed, the multi sensor detected skew greater than the specified one. When media was fed, the multi sensor could not detect the right edge of media. When media was fed, the multi sensor could not detect the left edge of media. |
| Causes: | Media, media loading method, paper path, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Media check If there is any print or stain in the detection area on the media or the media seze is not the specified one, replace the media. 2. Media loading position check If the media loading position is wrong, load the media again. 3. Visual check Remove foreign substances from multi sensor if any. 4. Multi sensor Select [SERVICE MODE]>[DISPLAY]>[SYSTEM]>[SIZE CR] to check the value read by the multi sensor. If the value is wrong, replace the multi sensor. 5. Cable continuity check If continuity of the cable between the head relay PCB and the carriage relay PCB is abnormal, replace the cable. 6. Replace the Carriage PCB 7. Cable continuity check If continuity of the cable beween the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03010000-2820 |
| Description: | Adjustment error. Auto head alignment selected from the user menu could not be carried out because the alignment patter read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the adjustment patter read result was NG. Decentering correction selected in the service mode cannot be carried out because the correction pattern read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the head check patter read result was NG. |
| Causes: | Operation method, printhead, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Check whether the media type selected on the operation panel is the same as the type of the media used to print the adjustment pattern. If they are different, retry adjustment using the media of the type selected on the operation panel. 2. If ink bleeds greatly, change the media. 3. Carry out head cleaning, and retry adjustment. If the adjustment result is poor, replace the printhead. 4. Replace the multi sensor, and then retry adjustment. 5. Cable continuity check If continuity of the cable between the multi sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the carriage PCB. 7. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03010000-2821 |
| Description: | Adjustment error. Auto head alignment selected from the user menu could not be carried out because the alignment patter read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the adjustment patter read result was NG. Decentering correction selected in the service mode cannot be carried out because the correction pattern read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the head check patter read result was NG. |
| Causes: | Operation method, printhead, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Check whether the media type selected on the operation panel is the same as the type of the media used to print the adjustment pattern. If they are different, retry adjustment using the media of the type selected on the operation panel. 2. If ink bleeds greatly, change the media. 3. Carry out head cleaning, and retry adjustment. If the adjustment result is poor, replace the printhead. 4. Replace the multi sensor, and then retry adjustment. 5. Cable continuity check If continuity of the cable between the multi sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the carriage PCB. 7. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03010000-2822 |
| Description: | Adjustment error. Auto head alignment selected from the user menu could not be carried out because the alignment patter read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the adjustment patter read result was NG. Decentering correction selected in the service mode cannot be carried out because the correction pattern read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the head check patter read result was NG. |
| Causes: | Operation method, printhead, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Check whether the media type selected on the operation panel is the same as the type of the media used to print the adjustment pattern. If they are different, retry adjustment using the media of the type selected on the operation panel. 2. If ink bleeds greatly, change the media. 3. Carry out head cleaning, and retry adjustment. If the adjustment result is poor, replace the printhead. 4. Replace the multi sensor, and then retry adjustment. 5. Cable continuity check If continuity of the cable between the multi sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the carriage PCB. 7. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03010000-2823 |
| Description: | Adjustment error. Auto head alignment selected from the user menu could not be carried out because the alignment patter read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the adjustment patter read result was NG. Decentering correction selected in the service mode cannot be carried out because the correction pattern read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the head check patter read result was NG. |
| Causes: | Operation method, printhead, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Check whether the media type selected on the operation panel is the same as the type of the media used to print the adjustment pattern. If they are different, retry adjustment using the media of the type selected on the operation panel. 2. If ink bleeds greatly, change the media. 3. Carry out head cleaning, and retry adjustment. If the adjustment result is poor, replace the printhead. 4. Replace the multi sensor, and then retry adjustment. 5. Cable continuity check If continuity of the cable between the multi sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the carriage PCB. 7. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03010000-2E1F |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03010000-2E25 |
| Description: | Paper feed/delivery jam error. During paper feed or delivery, paper jammed or paper was fed improperly. During printing, paper was fed out of the way. |
| Causes: | paper path, media sensor, or main controller |
| Remedy: | 1. Visual check Remove foreign substances from the paper path and media sensor if any. If the paper feed surface or moving part of the paper path is damaged or deformed, replace the peper path. 2. Media sensor. Select [SERVICE MODE]>[I/O DISPLAY] to check the media sensor for normal operation. If the operation is abnormal, replace the media sensor. 3. Cable continuity check If continuity of the cable between the media sensor and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03010000-2E27 |
| Description: | Paper feed/delivery jam error. During paper feed or delivery, paper jammed or paper was fed improperly. During printing, paper was fed out of the way. |
| Causes: | paper path, media sensor, or main controller |
| Remedy: | 1. Visual check Remove foreign substances from the paper path and media sensor if any. If the paper feed surface or moving part of the paper path is damaged or deformed, replace the peper path. 2. Media sensor. Select [SERVICE MODE]>[I/O DISPLAY] to check the media sensor for normal operation. If the operation is abnormal, replace the media sensor. 3. Cable continuity check If continuity of the cable between the media sensor and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03010000-2F33 |
| Description: | Adjustment error. Auto head alignment selected from the user menu could not be carried out because the alignment patter read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the adjustment patter read result was NG. Decentering correction selected in the service mode cannot be carried out because the correction pattern read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the head check patter read result was NG. |
| Causes: | Operation method, printhead, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Check whether the media type selected on the operation panel is the same as the type of the media used to print the adjustment pattern. If they are different, retry adjustment using the media of the type selected on the operation panel. 2. If ink bleeds greatly, change the media. 3. Carry out head cleaning, and retry adjustment. If the adjustment result is poor, replace the printhead. 4. Replace the multi sensor, and then retry adjustment. 5. Cable continuity check If continuity of the cable between the multi sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the carriage PCB. 7. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03016000-2010 |
| Description: | Multi sensor error. When media was fed, the multi sensor could not detect the media width. When the right edge of media was detected, the multi sensor detected that the media had been loaded at a wrong position. When the leading edge of media was to be detected, the multi sensor could not detect the leading edge of media. When media was fed, the multi sensor detected media smaller than the specified size. When media was fed, the multi sensor detected media larger than the specified size. When media was fed, the multi sensor detected skew greater than the specified one. When media was fed, the multi sensor could not detect the right edge of media. When media was fed, the multi sensor could not detect the left edge of media. |
| Causes: | Media, media loading method, paper path, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Media check If there is any print or stain in the detection area on the media or the media seze is not the specified one, replace the media. 2. Media loading position check If the media loading position is wrong, load the media again. 3. Visual check Remove foreign substances from multi sensor if any. 4. Multi sensor Select [SERVICE MODE]>[DISPLAY]>[SYSTEM]>[SIZE CR] to check the value read by the multi sensor. If the value is wrong, replace the multi sensor. 5. Cable continuity check If continuity of the cable between the head relay PCB and the carriage relay PCB is abnormal, replace the cable. 6. Replace the Carriage PCB 7. Cable continuity check If continuity of the cable beween the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03030000-2E21 |
| Description: | IEEE1394 error. The IEEE1394 interface is faulty. |
| Causes: | IEEE1394 interface board or main controller PCB. |
| Remedy: | 1. Turn off the printer, and then turn it on again. 2. IEEE1394 interface board Remove the IEEE1394 interface board, nstall it again, and then turn on the printer, If the trouble persists, replace the IEEE1394 interface board. 3. Replace the main controller PCB. |
| Error code: | 03060000-2E14 |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03060000-2E16 |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03060200-2E03 |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03060200-2E0B |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03060A00-2E00 |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03060A00-2E01 |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03060A00-2E0E |
| Description: | Roll media unit uninstallation. The auto roll feed unit cannot be detected. |
| Causes: | Roll feed unit PCB, connector, or main controller PCB |
| Remedy: | 1. Cable continuity check If continuity of the cable between the roll feed unit PCB and the connector is abnormal, replace the cable. 2. Cable continuity check If continuity of the cable between the connector and the main controller PCB is abnormal, replace the cable. 3. Replace the roll feed unit PCB. 4. Replace the connector. 5. Replace the main controller PCB. |
| Error code: | 03060A00-2E1B |
| Description: | Roll media end error. During printing or roll media feed, the media sensor detected the end of the roll media. |
| Causes: | Roll media, roll media sensor, roll feed unit PCB, or main controller PCB. |
| Remedy: | 1. Roll media If roll media is used up, load new roll media. 2. Roll media sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the media sensor. 3. Cable continuity check If continuity of the cable between the roll media sensor and the roll feed unit PCB is abnormal, replace the cable. 4. Replace the roll feed unit PCB. 5. Cable continuit check If continuity of the cable between the roll feed unit PCB and the main controller PCB is abnormal, replace the cable. 6. Replace the main controller PCB. |
| Error code: | 03061000-2E15 |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03130031-291B |
| Description: | Lift home position error. The Lift home position could not be detected within the specified time. |
| Causes: | Lift drive unit, lift cam sensor, lift motor, or main controller PCB |
| Remedy: | 1. Visual check Remove foreign substances from the lift drive unit if any. 2. Lift cam sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the lift cam sensor 3. Cable continuity check If continuity of the cable between the lift cam sensor, lift motor and main controller PCB is abnormal, replace the cable. 4. Replace the lift motor. 5. Replace the main controller PCB. |
| Error code: | 03130031-291D |
| Description: | Supr cam sensor error. It failed in the detection of the spur cam sensor. |
| Causes: | Spur unit, spur cam sensor, or main controller PCB |
| Remedy: | 1. Visual check Remove foreign substances from the spur unit if any. 2. Spur cam sensor Select [SEVECE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the feed roller HP sensor. 3. Cable continuity check If continuity of the cable between the spur cam sensor and the main controller PCB is abnormal, replace the cable. 4. Replace the spur motor. 5. Replace the spur unit. 6. Replace the main controller PCB. |
| Error code: | 03130031-2E23 |
| Description: | Cutter unit breakdown. Abnormality occurred in the cutter unit. |
| Causes: | Cutter unit, Cutter HP sensor, cutter right position sensor, cutter lift sensor, cutter motor, cutter driver PCB, or main controller PCB |
| Remedy: | 1. Visual check Remove foreign substances from the cutter unit if any. 2. Cutter home position sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the cutter home position sensor. 3. Cutter right position sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the cutter right position sensor. 4. Cutter lift sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the cutter lift sensor. 5. Cable continuity check If continuity of the cable between the cutter HP sensor, cutter right position sensor, cutter lift sensor, cutter motor and cutter driver PCB is abnormal, replace the cable. 6. Replace the cutter motor. 7. Replace the cutter driver PCB. 8. Replace the cutter unit. 9. Cable continuity check If continuity of the cable between the cutter driver PCB and the main controller PCB is abnormal, replace the cable. 10. Replace the main controller PCB. |
| Error code: | 03130031-2F13 |
| Description: | A/D Converter external trigger output stopped. Defective main controller PCB |
| Causes: | Main controller PCB |
| Remedy: | 1. main controller PCB |
| Error code: | 03130031-2F14 |
| Description: | ASIC Register cannot be written. A main controller PCB firm ware error occurred. |
| Causes: | Main controller PCB |
| Remedy: | 1. Turn off the printer, and then turn it off again. 2. Replace the main controller PCB. |
| Error code: | 03130031-2F16 |
| Description: | Mist fan error. Mist fan rotation could not be detected during mist fan rotation. |
| Causes: | Mist fan or main controller PCB |
| Remedy: | 1. Replace the mist fan. 2. Cable continuity check If continuity of the cable between the mist fan and the main controller PCB is abnormal, replace the cable. 3. Replace the main controller PCB. |
| Error code: | 03130031-2F17 |
| Description: | Suction fan error. When the suction fan was driven, the lock signal was detected for more the specified time. |
| Causes: | Suction fan or main controller PCB |
| Remedy: | 1. suction fan Select [SERVICE MODE]>[FUNCTION]>[PLATEN FAN] to check the suction fan for normal operation. If the operation is abnormal, replace the suction fan. 2. Cable continuity check If continuity of the cable between the suction fan and the main controller PCB is abnormal, replace the cable. 3. Replace the main controller PCB. |
| Error code: | 03130031-2F20 |
| Description: | Defective sensor in purge unit. The pump cam sensor in the purge unit could not detect the home position of the purge motor within the specified time. |
| Causes: | Purge unit or main controller PCB |
| Remedy: | 1. Cable continuity check If continuity of the cable between the pump cam sensor, pump motor and main controller PCB is abnormal, replace the cable. 2. Replace the purge unit. 3. Replace the main controller PCB. |
| Error code: | 03130031-2F22 |
| Description: | Defective sensor in purge unit. The pump cam sensor in the purge unit could not detect the home position of the purge motor within the specified time. |
| Causes: | Purge unit or main controller PCB |
| Remedy: | 1. Cable continuity check If continuity of the cable between the pump cam sensor, pump motor and main controller PCB is abnormal, replace the cable. 2. Replace the purge unit. 3. Replace the main controller PCB. |
| Error code: | 03130031-2F23 |
| Description: | Defective sensor in purge unit. The pump cam sensor in the purge unit could not detect the home position of the purge motor within the specified time. |
| Causes: | Purge unit or main controller PCB |
| Remedy: | 1. Cable continuity check If continuity of the cable between the pump cam sensor, pump motor and main controller PCB is abnormal, replace the cable. 2. Replace the purge unit. 3. Replace the main controller PCB. |
| Error code: | 03130031-2F24 |
| Description: | Cutter drive time-out error. After the cutter motor was driven of the cutter unit, cutter right detection sensor or cutter HP sensor ON was not able to be detected in the regulation time. |
| Causes: | Cutter right position sensor, cutter HP sensor, cutter motor, cutter unit, cutter driver PCB, or main controller PCB |
| Remedy: | 1. Visual check Remove foreign substances from the cutter unit if any. 2. Cutter right position sensor and cutter HP sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the feed roller HP sensor. 3. Cable continuity check If continuity of the cable between the cutter right position sensor, the cutter HP sensor, the cutter motor and the cutter driver PCB is abnormal, replace the cable. 4. Replace the cutter motor. 5. Replace the cutter unit. 6. Replace the cutter driver PCB. 7. Cable continuity check If continuity of the cable between the cutter driver PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03130031-2F25 |
| Description: | Carriage home position error. The carriage home position could not be detected within the specified time. |
| Causes: | Carriage stopper, linear scale, linear encoder, carriage PCB, or main controller PCB. |
| Remedy: | 1. Visual check Remove foreign substances from the carriage stopper, the linear scale and linear encoder if any. 2. Replace the linear scale. 3. Replace the linear encoder. 4. Cable continuity check If continuity of the cable between the linear encoder and the carriage PCB is abnormal, replace the cable. 5. Replace the carriage PCB. 6. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 7. Replace the main controller PCB. |
| Error code: | 03130031-2F26 |
| Description: | Carriage motor error. The carriage did not operate because the carriage motor was overloaded due to a physical cause such as a jam. The carriage motor did not reach the specified time. |
| Causes: | Carriage path way, carriage rail, carriage belt, linear scale, linear encoder, carriage motor, carriage PCB, or main controller PCB. |
| Remedy: | 1. Carriage pathway check Remove foreign substances(jammed paper) from the carriage pathway if any. 2. Carriage rail Visually check whether the carriage rail is dirty. If the carriage rail is dirty, clean it using rail cleaner. 3. Carriage belt Visually check whether the carriage belt is loose.If the carriage belt is loose, remove it and then reinstall it. 4. Replace linear scale 5. Replace liner encoder 6. Cable continuity check If continuity of the cable between the linear encoder and the main controller PCB is abnormal, replace the cable. 7. Replace carriage motor 8. Cable continuity check If continuity of the cable between the carriage motor and the main controller PCB is abnormal, replace the cable. 9. Replace the carriage PCB 10. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 11. Replace the main controller PCB. |
| Error code: | 03130031-2F27 |
| Description: | Carriage motor error. The carriage did not operate because the carriage motor was overloaded due to a physical cause such as a jam. The carriage motor did not reach the specified time. |
| Causes: | Carriage path way, carriage rail, carriage belt, linear scale, linear encoder, carriage motor, carriage PCB, or main controller PCB. |
| Remedy: | 1. Carriage pathway check Remove foreign substances(jammed paper) from the carriage pathway if any. 2. Carriage rail Visually check whether the carriage rail is dirty. If the carriage rail is dirty, clean it using rail cleaner. 3. Carriage belt Visually check whether the carriage belt is loose.If the carriage belt is loose, remove it and then reinstall it. 4. Replace linear scale 5. Replace liner encoder 6. Cable continuity check If continuity of the cable between the linear encoder and the main controller PCB is abnormal, replace the cable. 7. Replace carriage motor 8. Cable continuity check If continuity of the cable between the carriage motor and the main controller PCB is abnormal, replace the cable. 9. Replace the carriage PCB 10. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 11. Replace the main controller PCB. |
| Error code: | 03130031-2F2A |
| Description: | Feed roller home position error. During power-on, the feed roller HP sensor could not detect that the reference of Scale that exists on encoder film area color change from transparent to black. |
| Causes: | Feed roller encoder film, feed roller HP sensor, feed motor, or main controller PCB |
| Remedy: | 1. Visual check If the feed roller encoder film is damaged, replace it. Remove foreign substances from the feed roller encoder film if any. 2. Feed roller HP sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the feed roller HP sensor. 3. Cable continuity check If continuity of the cable between the feed roller HP sensor, feed motor and the main controller PCB is abnormal, replace the cable. 4. Replace the feed motor. 5. Replace the main controller PCB. |
| Error code: | 03130031-2F2D |
| Description: | The cassette cannot work. The cassette cannot work. |
| Causes: | Pressure plate arm, cassette cam sensor, cassette motor, or main controller PCB |
| Remedy: | 1. Visual check If the pressure plate arm is abnormal, replace the pressure plata arm. 2. Cassette cam sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation, If the operation is abnormal, replace the valve motor. 3. Cable continuity check If continuity of the cable between the cassette cam sensor, cassette motor and the main controller PCB is abnormal, replace the cable. 4. Replace the cassette motor. 5. Replace the main controller PCB. |
| Error code: | 03130031-2F2E |
| Description: | Roll drive time-out error. The roll cam sensor home position in roll feed unit could not be detected within the specified time. |
| Causes: | roll cam drive unit, roll cam sensor, roll motor, Connector, roll feed unit PCB, or main controller PCB |
| Remedy: | 1. Visual check If the gear in roll cam drive unit is abnormal, replace the gear. 2. Roll cam sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the roll cam sensor. 3. Cable continuity check If continuity of the cable between the roll cam sensor, roll motor and roll feed unit PCB is abnormal, replace the cable. 4. Replace the roll motor. 5. Replace the roll feed unit PCB. 6. Cable continuity check If continuity of the cable between the roll feed unit PCB and main controller PCB is abnormal, replace the cable. 7. Replace the connector. 8. Replace the main controller PCB. |
| Error code: | 03130031-2F32 |
| Description: | Adjustment error. Auto head alignment selected from the user menu could not be carried out because the alignment patter read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the adjustment patter read result was NG. Decentering correction selected in the service mode cannot be carried out because the correction pattern read result was NG. Auto LF adjustment selected from the user menu or in the service mode could not be carried out because the head check patter read result was NG. |
| Causes: | Operation method, printhead, multi sensor, carriage PCB, or main controller PCB |
| Remedy: | 1. Check whether the media type selected on the operation panel is the same as the type of the media used to print the adjustment pattern. If they are different, retry adjustment using the media of the type selected on the operation panel. 2. If ink bleeds greatly, change the media. 3. Carry out head cleaning, and retry adjustment. If the adjustment result is poor, replace the printhead. 4. Replace the multi sensor, and then retry adjustment. 5. Cable continuity check If continuity of the cable between the multi sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the carriage PCB. 7. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03130031-2F3A |
| Description: | Valve open/close error. When the ink supply valve opened or closed, valve open/closed detection sensor could not detect the valve cam rotation. |
| Causes: | Valve open/closed detection sensor, valve motor, or main controller PCB |
| Remedy: | 1. Visual check Remove foreign substances from the motor,gear, and sensor of the valve open/close mechanism if any. 2. Valve open/close detection sensor Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the valve open/close detection sensor. 3. Valve motor Select [SERVICE MODE]>[FUNCTION]>[INK VALVE] to check for normal operation. If the operation is abnormal, replace the valve motor. 4. Cable continuity check If continuity of the cable between the valve open/close detection sensor, valve motor and main controller PCB is abnormal, replace the cable. 5. Replace main controller PCB. |
| Error code: | 03180003-2E22 |
| Description: | MIT error. When set to cassette paper feed "No" with MIT, the job of the cassette specification was received. |
| Causes: | Main controller PCB |
| Remedy: | 1. Replace the main controller PCB. |
| Error code: | 03180101-2E17 |
| Description: | Cassette uninstallation. The cassette has come off. |
| Causes: | Cassette detection sensor or main controller PCB |
| Remedy: | 1. Cassette detection sensor Select [SEVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the cassette detection sensor. 2. Cable continuity check If continuity of the cable between the cassette detection sensor and the main controller PCB is abnormal, replace the cable. 3. Replace the main controller |
| Error code: | 03800200-2802 |
| Description: | Printhead error. Improper installation of the printhead(L) was detected. A checksum error was detected in the EEPROM of the printhead(L). Unable to correct printhead(L) DI. Printhead(L) was installed right and left and oppositely. Improper installation of the printhead(R) was detected. A checksum error was detected in the EEPROM of the printhead(R). Unable to correct printhead(R) DI. Printhead(R) was installed right and left and oppositely. |
| Causes: | Printhead, carriage PCB, carriage unit, or main controller PCB. |
| Remedy: | 1. Replace the printhead. 2. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 3. Replace the carriage PCB. 4. Replace the carriage unit. 5. Replace the main controller PCB. |
| Error code: | 03800200-2804 |
| Description: | Printhead error. Improper installation of the printhead(L) was detected. A checksum error was detected in the EEPROM of the printhead(L). Unable to correct printhead(L) DI. Printhead(L) was installed right and left and oppositely. Improper installation of the printhead(R) was detected. A checksum error was detected in the EEPROM of the printhead(R). Unable to correct printhead(R) DI. Printhead(R) was installed right and left and oppositely. |
| Causes: | Printhead, carriage PCB, carriage unit, or main controller PCB. |
| Remedy: | 1. Replace the printhead. 2. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 3. Replace the carriage PCB. 4. Replace the carriage unit. 5. Replace the main controller PCB. |
| Error code: | 03800201-280A |
| Description: | Printhead error. Improper installation of the printhead(L) was detected. A checksum error was detected in the EEPROM of the printhead(L). Unable to correct printhead(L) DI. Printhead(L) was installed right and left and oppositely. Improper installation of the printhead(R) was detected. A checksum error was detected in the EEPROM of the printhead(R). Unable to correct printhead(R) DI. Printhead(R) was installed right and left and oppositely. |
| Causes: | Printhead, carriage PCB, carriage unit, or main controller PCB. |
| Remedy: | 1. Replace the printhead. 2. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 3. Replace the carriage PCB. 4. Replace the carriage unit. 5. Replace the main controller PCB. |
| Error code: | 03800202-2807 |
| Description: | Printhead error. Improper installation of the printhead(L) was detected. A checksum error was detected in the EEPROM of the printhead(L). Unable to correct printhead(L) DI. Printhead(L) was installed right and left and oppositely. Improper installation of the printhead(R) was detected. A checksum error was detected in the EEPROM of the printhead(R). Unable to correct printhead(R) DI. Printhead(R) was installed right and left and oppositely. |
| Causes: | Printhead, carriage PCB, carriage unit, or main controller PCB. |
| Remedy: | 1. Replace the printhead. 2. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 3. Replace the carriage PCB. 4. Replace the carriage unit. 5. Replace the main controller PCB. |
| Error code: | 03800204-2540 |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03800300-2801 |
| Description: | Printhead error. Improper installation of the printhead(L) was detected. A checksum error was detected in the EEPROM of the printhead(L). Unable to correct printhead(L) DI. Printhead(L) was installed right and left and oppositely. Improper installation of the printhead(R) was detected. A checksum error was detected in the EEPROM of the printhead(R). Unable to correct printhead(R) DI. Printhead(R) was installed right and left and oppositely. |
| Causes: | Printhead, carriage PCB, carriage unit, or main controller PCB. |
| Remedy: | 1. Replace the printhead. 2. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 3. Replace the carriage PCB. 4. Replace the carriage unit. 5. Replace the main controller PCB. |
| Error code: | 03800301-2809 |
| Description: | Printhead error. Improper installation of the printhead(L) was detected. A checksum error was detected in the EEPROM of the printhead(L). Unable to correct printhead(L) DI. Printhead(L) was installed right and left and oppositely. Improper installation of the printhead(R) was detected. A checksum error was detected in the EEPROM of the printhead(R). Unable to correct printhead(R) DI. Printhead(R) was installed right and left and oppositely. |
| Causes: | Printhead, carriage PCB, carriage unit, or main controller PCB. |
| Remedy: | 1. Replace the printhead. 2. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 3. Replace the carriage PCB. 4. Replace the carriage unit. 5. Replace the main controller PCB. |
| Error code: | 03800400-2803 |
| Description: | Printhead error. Improper installation of the printhead(L) was detected. A checksum error was detected in the EEPROM of the printhead(L). Unable to correct printhead(L) DI. Printhead(L) was installed right and left and oppositely. Improper installation of the printhead(R) was detected. A checksum error was detected in the EEPROM of the printhead(R). Unable to correct printhead(R) DI. Printhead(R) was installed right and left and oppositely. |
| Causes: | Printhead, carriage PCB, carriage unit, or main controller PCB. |
| Remedy: | 1. Replace the printhead. 2. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 3. Replace the carriage PCB. 4. Replace the carriage unit. 5. Replace the main controller PCB. |
| Error code: | 03800401-280B |
| Description: | Printhead error. Improper installation of the printhead(L) was detected. A checksum error was detected in the EEPROM of the printhead(L). Unable to correct printhead(L) DI. Printhead(L) was installed right and left and oppositely. Improper installation of the printhead(R) was detected. A checksum error was detected in the EEPROM of the printhead(R). Unable to correct printhead(R) DI. Printhead(R) was installed right and left and oppositely. |
| Causes: | Printhead, carriage PCB, carriage unit, or main controller PCB. |
| Remedy: | 1. Replace the printhead. 2. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 3. Replace the carriage PCB. 4. Replace the carriage unit. 5. Replace the main controller PCB. |
| Error code: | 03800500-2F2F |
| Description: | Head management sensor error. The head management sensor detected a ink discharge error. A sensor sensitivity error was detected during head management sensor position adjustment. |
| Causes: | Printhead, head management sensor, or main controller PCB |
| Remedy: | 1. Replace the printhead. 2. Visual check Remove foreign substances from the head management sensor if any. 3. Replace the haed management sensor. 4. Cable continuity check If continuity of the cable between the head management sensor and the main controller PCB is abnormal, replace the cable. 5. Replace the main controller PCB. |
| Error code: | 03800500-2F30 |
| Description: | Head management sensor error. The head management sensor detected a ink discharge error. A sensor sensitivity error was detected during head management sensor position adjustment. |
| Causes: | Printhead, head management sensor, or main controller PCB |
| Remedy: | 1. Replace the printhead. 2. Visual check Remove foreign substances from the head management sensor if any. 3. Replace the haed management sensor. 4. Cable continuity check If continuity of the cable between the head management sensor and the main controller PCB is abnormal, replace the cable. 5. Replace the main controller PCB. |
| Error code: | 03810101-2501 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810102-2502 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810103-2503 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810104-2500 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810105-2508 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810106-2506 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810107-250A |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810108-250C |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810109-250B |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810112-2504 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810113-2505 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810115-2509 |
| Description: | No ink error. No ink status was detected in the ink tank. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03810201-2581 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810201-2591 |
| Description: | Tank level error 2. Ink shortage was detected while printing it. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810202-2582 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810202-2592 |
| Description: | Tank level error 2. Ink shortage was detected while printing it. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810203-2583 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810203-2593 |
| Description: | Tank level error 2. Ink shortage was detected while printing it. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810204-2580 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810204-2590 |
| Description: | Tank level error 2. Ink shortage was detected while printing it. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810205-2588 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810205-2598 |
| Description: | Tank level error 2. Ink shortage was detected while printing it. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810206-2586 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810207-258A |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810207-259A |
| Description: | Tank level error 2. Ink shortage was detected while printing it. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810208-258C |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810208-259C |
| Description: | Tank level error 2. Ink shortage was detected while printing it. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810209-258B |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810209-259B |
| Description: | Tank level error 2. Ink shortage was detected while printing it. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810212-2584 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810213-2585 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810213-2595 |
| Description: | Tank level error 2. Ink shortage was detected while printing it. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810215-2589 |
| Description: | Tank level error 1. When head cleaning was executed automatically at ink level 1,insufficiency of ink was detected. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03810215-2599 |
| Description: | Tank level error 2. Ink shortage was detected while printing it. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 03830101-2521 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830102-2522 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830103-2523 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830104-2520 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830105-2528 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830106-2526 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830107-252A |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830108-252C |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830109-252B |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830112-2524 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830113-2525 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830115-2529 |
| Description: | Ink tank is not installed.(This error occurs when the ink tank is replaced.) When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed. |
| Causes: | Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB |
| Remedy: | 1. Operation check Install the ink tank. 2. Visual check Remove foreign substances from the ink tank contacts and ink cover sensor if any. 3. Replace the ink tank. 4. Ink tank cover sensor Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor. 5. Cable continuity check If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable. 6. Replace the ink tank unit. 7. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 8. Replace the main controller PCB. |
| Error code: | 03830201-2541 |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830202-2542 |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830203-2543 |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830205-2548 |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830206-2546 |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830207-254A |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830208-254C |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830209-254B |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830212-2544 |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830213-2545 |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830215-2549 |
| Description: | Invalid ink tank ID. The installed ink tank is wrong |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Replace the main controller PCB. |
| Error code: | 03830301-2561 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830302-2562 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830303-2563 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830304-2560 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830305-2568 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830306-2566 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830307-256A |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830308-256C |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830309-256B |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830312-2564 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830313-2565 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03830315-2569 |
| Description: | Ink tank EEPROM error. An ink tank EEPROM checksum error was detected. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Replace the ink tank unit. 3. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03841101-2818 |
| Description: | Maintenance cartridge error. The maintenance cartridge is full. The maintenance cartridge does not have the free space for various types of cleaning. No maintenance cartridge is installed. The EEPROM of the maintenance cartridge is abnormal. A maintenance cartridge ID error occurred. |
| Causes: | Maintenance cartridge, maintenance cartridge relay PCB, or main controller PCB |
| Remedy: | 1. Replace the maintenance cartridge. 2. Replace the maintenance cartridge relay PCB. 3. Cable continuity check If continuity of the cable between the maintenance cartridge relay PCB and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03841201-2816 |
| Description: | Maintenance cartridge error. The maintenance cartridge is full. The maintenance cartridge does not have the free space for various types of cleaning. No maintenance cartridge is installed. The EEPROM of the maintenance cartridge is abnormal. A maintenance cartridge ID error occurred. |
| Causes: | Maintenance cartridge, maintenance cartridge relay PCB, or main controller PCB |
| Remedy: | 1. Replace the maintenance cartridge. 2. Replace the maintenance cartridge relay PCB. 3. Cable continuity check If continuity of the cable between the maintenance cartridge relay PCB and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03841201-2817 |
| Description: | Maintenance cartridge error. The maintenance cartridge is full. The maintenance cartridge does not have the free space for various types of cleaning. No maintenance cartridge is installed. The EEPROM of the maintenance cartridge is abnormal. A maintenance cartridge ID error occurred. |
| Causes: | Maintenance cartridge, maintenance cartridge relay PCB, or main controller PCB |
| Remedy: | 1. Replace the maintenance cartridge. 2. Replace the maintenance cartridge relay PCB. 3. Cable continuity check If continuity of the cable between the maintenance cartridge relay PCB and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | 03860002-2E0A |
| Description: | Path mismatch error. The size of the media used to print the adjustment pattern was smaller than the specified one. No roll media was loaded when data was received with roll media specified as a media type. No roll media was loaded when test printing. No cut sheet was loaded in the cassette when data was received with cut sheet specified as a media type. Data requiring roll media was received when cut sheet was loaded. Data requiring cut sheet was received when roll media was loaded. No roll media was loaded when data was different from the size of the actually loaded media. The type of the loaded media was different from the media type specified using the driver. The size of the loaded media in the cassette was different from the media size specified using the driver. |
| Causes: | Media type or main controller PCB |
| Remedy: | 1. Media check Check the loaded media. If the media type is different from that required by the send data, no media is loaded, or the size of the loaded media is not the specified one, load correct media. 2. Replace the main controller PCB. |
| Error code: | 03861001-2405 |
| Description: | Borderless printing error. The position where the media is loaded is not suitable for borderless printing. The received data is not suitable for borderless printing. |
| Causes: | Operation method |
| Remedy: | 1. Check the operation method and retry printing. |
| Error code: | 03861001-2406 |
| Description: | Borderless printing error. The position where the media is loaded is not suitable for borderless printing. The received data is not suitable for borderless printing. |
| Causes: | Operation method |
| Remedy: | 1. Check the operation method and retry printing. |
| Error code: | 03862000-2E09 |
| Description: | Insufficient roll media error. The machine detected that the remaining roll media was insufficient. |
| Causes: | Roll media, feed roller HP sensor, feed roller encoder film, feed roller encoder, or main controller PCB |
| Remedy: | 1. Replace the roll media. 2. Feed roller HP sensor Check for normal operation. If the operation is abnormal, replace the feed roller HP sensor. 3. Replace the feed roller encoder film. 4. Replace the feed roller encoder. 5. Replace the main controller PCB. |
| Error code: | 03870001-2015 |
| Description: | Cut error. After roll media cutting, the multi sensor could not detect the media end. |
| Causes: | Media, multi sensor, cutter unit, cutter lifter unit, cutter drive unit, cutter driver PCB, carriage PCB, or main controller PCB |
| Remedy: | 1. Media check If there is any print or stain in the detection area on the media or the media size is not the specified one, replace the media. 2. Multi sensor Select [SERVICE MODE]>[DISPLAY]>[SYSTEM]>[SIZE CR] to check the value read by the multi sensor. If the value is wrong, replace the multi sensor. 3. Visual check Remove foreign substances from the multi sensor, the cutter unit, the cutter lifter unit, and the cutter drive unit if any. If the cutter unit, the cutter lifter unit, and the cutter drive unit is damaged or deformed, replace it. 4. Cable continuity check If continuity of the cable between the multi sensor and the carriage PCB is abnormal, replace the cable. 5. Cable continuity check If continuity of the cable between the cutter lifter unit, the cutter drive unit, and the cutter driver PCB is abnormal, replace the cable. 6. Replace the cutter driver PCB. 7. Replace the carriage PCB. 8. Replace the main controller PCB. |
| Error code: | 3130031-2F28 |
| Description: | Defective sensor in purge unit. The pump cam sensor in the purge unit could not detect the home position of the purge motor within the specified time. |
| Causes: | Purge unit or main controller PCB |
| Remedy: | 1. Cable continuity check If continuity of the cable between the pump cam sensor, pump motor and main controller PCB is abnormal, replace the cable. 2. Replace the purge unit. 3. Replace the main controller PCB. |
| Error code: | 3810206-2596 |
| Description: | Tank level error 2. Ink shortage was detected while printing it. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 3810212-2594 |
| Description: | Tank level error 2. Ink shortage was detected while printing it. Opening the ink tank cover recovers this error. The error recovery operation is continued until it is cancelled using the STOP key. |
| Causes: | Ink tank, ink tank unit, or main controller PCB |
| Remedy: | 1. Replace the ink tank. 2. Cable continuity check If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable. 3. Replace the ink tank unit. 4. Replace the main controller PCB. |
| Error code: | 3841001-2819 |
| Description: | Maintenance cartridge error. The maintenance cartridge is full. The maintenance cartridge does not have the free space for various types of cleaning. No maintenance cartridge is installed. The EEPROM of the maintenance cartridge is abnormal. A maintenance cartridge ID error occurred. |
| Causes: | Maintenance cartridge, maintenance cartridge relay PCB, or main controller PCB |
| Remedy: | 1. Replace the maintenance cartridge. 2. Replace the maintenance cartridge relay PCB. 3. Cable continuity check If continuity of the cable between the maintenance cartridge relay PCB and the main controller PCB is abnormal, replace the cable. 4. Replace the main controller PCB. |
| Error code: | E141-4046 |
| Description: | Recovery part revolutions reaching 50,000 cycles or more Recovery part operations have reached a predetermined count. |
| Causes: | Purge unit or main controller PCB |
| Remedy: | Check the parts counter and replace required parts. (Replacement of the parts coming to the end of their useful lives is recommended.) Initialize the counter for the replacement unit mounted. The iPF5000/500/600 have a counter problem fixed. Identify the firmware version and start in download mode to upgrade the firmware to Ver.1.13 or later from any earlier release. |
| Error code: | E144-4047 |
| Description: | Carriage count error Supply part operations have reached a predetermined count. |
| Causes: | Ink tank or main controller PCB |
| Remedy: | Check the parts counter and replace the target unit or Refresh Service Kit. Initialize the parts counter for the target unit after the replacement. |
| Error code: | E146-4001 |
| Description: | Borderless/flow pre-ejection/mist recovery count full |
| Causes: | Waste ink box, mist fan unit, platen duct or main controller PCB |
| Remedy: | Check the parts counter and replace the target unit or Refresh Service Kit. Initialize the parts counter for the target unit after the replacement. |
| Error code: | E161-403E |
| Description: | Head abnormal temperature rise (printhead 1 (R), or A model) Either of the two Di sensors maintained for each printhead chip (color-specific) has been detected at 120 degrees C or higher or -10 degrees C or lower. |
| Causes: | Printhead, carriage PCB or main controller PCB. |
| Error code: | E194-4034 |
| Description: | Sensor calibration error. Sensor calibration failed. |
| Causes: | Multi sensor, multi sensor base, carriage PCB, or main controller PCB |
| Remedy: | 1. Retry calibration in the service mode. 2. Visual check Remove foreign substances from the multi sensor base if any. 3. Replace the multi sensor. 4. Cable continuity check If continuity of the cable between the multi sensor and the carriage PCB is abnormal, repalce the cable. 5. Replace the carriage PCB. 6. Cable continuity check If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable. 7. Replace the main controller PCB. |
| Error code: | E194-404A |
| Description: | Non-ejection count error A non-ejection part operation counter has reached a specified limit. |
| Causes: | Head management sensor or main controller PCB |
| Remedy: | Check the parts counter and replace the target unit or Refresh Service Kit. Initialize the parts counter for the target unit after the replacement. |
| Error code: | E196-403F |
| Description: | Abnormally high head temperature. The printhead temperature became abnormally high. |
| Causes: | Printhead, carriage PCB or main controller PCB. |
| Remedy: | 1. Start up the printer in the service mode, and then replace the printhead. 2. Replace the carriage PCB. 3. Replace the main controller PCB. |
| Error code: | E196-4040 |
| Description: | Checksum error The checksum of a file transmitted on execution of the firmware update is unmatched. |
| Causes: | Firmware or main controller PCB |
| Remedy: | 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB. |
| Error code: | E196-4041 |
| Description: | Flash erase error Failed to erase flash ROM on execution of the firmware update. |
| Causes: | Firmware or main controller PCB |
| Remedy: | 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB. |
| Error code: | E196-4042 |
| Description: | Flash write error Failed to write flash ROM on execution of the firmware update. |
| Causes: | Firmware or main controller PCB |
| Remedy: | 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB |
| Error code: | E196-4045 |
| Description: | Engine EEPROM write error An EEPROM read/write failure has been detected in the engine portion of the firmware. |
| Causes: | Firmware or main controller PCB |
| Remedy: | 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB. |
| Error code: | E196-4049 |
| Description: | main controller PCB error. The main controller PCB is defective. |
| Causes: | Firmware or main controller PCB |
| Remedy: | 1. Upgrade the firmware. 2. Replace the main controller PCB. |
| Error code: | E198-401C |
| Description: | Faulty RTC Any error other than the two errors mentioned below has been detected while initializing the RTC at startup. |
| Causes: | Lithium battery or main controller PCB. |
| Remedy: | 1. Restart the printer in service mode. 2. Replace the main controller PCB. |
| Error code: | E198-401D |
| Description: | RTC low battery error A battery error has been detected while initializing the RTC at startup. |
| Causes: | Lithium battery or main controller PCB. |
| Remedy: | 1. Restart the printer in service mode. 2. Check the RTC battery. 3. Replace the main controller PCB. |
| Error code: | E198-401E |
| Description: | RTC clock stop The RTC has been detected idle while initializing the RTC at startup. |
| Causes: | Lithium battery or main controller PCB. |
| Remedy: | 1. Restart the printer in service mode. 2. Replace the main controller PCB. |
Парткод
Название
CANON PFI-101MBK Картридж матово-черный
CANON PFI-101BK Картридж черный
CANON PFI-101C Картридж голубой
CANON PFI-101M Картридж пурпурный
CANON PFI-101Y Картридж желтый
CANON PFI-101PC Картридж фото-голубой
CANON PFI-101PM Картридж фото-пурпурный
CANON PFI-101R Картридж красный
CANON PFI-101G Картридж зеленый
CANON PFI-101B Картридж синий
CANON PFI-101GY Картридж серый
CANON PFI-101PGY Картридж фото-серый
CANON MC-05 Емкость для отработанных чернил
CANON PFI-103MBK Картридж матово-черный
CANON PFI-103BK Картридж черный
CANON PFI-103GY Картридж серый
CANON PFI-103PGY Картридж фото-серый
CANON PF-03 Печатающая головка
